电信wifi7

cfe lrn module commit_id:4319684c

[CFE]CFE LRN module install successfully ...!

l3 lib module commit_id:4319684c

[CFE]L3 LIB module install successfully ...!

l4 lib module commit_id:4319684c

[CFE]L4 LIB module install successfully ...!

l2tp lib module commit_id:4319684c

[CFE]L2TP LIB module install successfully ...!

pptp lib module commit_id:4319684c

[CFE]PPTP LIB module install successfully ...!

dslite lib module commit_id:4319684c

[CFE]DSLITE LIB module install successfully ...!

mc lib module commit_id:4319684c

[CFE]MC LIB module install successfully ...!

mc list module commit_id:4319684c

[CFE]MC LIST module install successfully ...!

vxlan lib module commit_id:4319684c

[CFE]VXLAN LIB module install successfully ...!

cfe adp capa module commit_id:4319684c

fermion module commit_id:1195a7f5

hi_fermion_probe g_module=0 lsw/hi_fermion_fw_woe.bin

hi_fermion_init start

[LSW]hi_quk_init done

[LSW]compile_ver:50010 compile_time:0

[LSW]thread_symbol: name:"core1_thread07_entry" pc:0x0

[LSW]thread_symbol: name:"core0_thread01_entry" pc:0x4

[LSW]thread_symbol: name:"core0_thread00_entry" pc:0x906

[LSW]thread_symbol: name:"core1_thread04_entry" pc:0xcc3

[LSW]thread_symbol: name:"core1_thread06_entry" pc:0xfaa

[LSW]thread_symbol: name:"core0_thread02_entry" pc:0x1322

[LSW]thread_symbol: name:"core1_thread05_entry" pc:0x148e

[LSW]thread_symbol: name:"core0_thread03_entry" pc:0x14a5

[LSW]hi_load_sym_table::thread_cnt:8

hi_quk_dfx_init done.

hi_fermion_init done.

fermion 17500000.fermion: Hisilicon fermion swver=v10,hwver=v10,ret=0x0

xoe module commit_id:1195a7f5

lsw woe module commit_id:1195a7f5

match tx_msdu_info_item_num setting.

dpu init finish. ret=00000000

lsw_woe lsw_woe: Hisilicon lsw_woe driver init

wifi tiangong module commit_id:1195a7f5

woe_wifi_tiangong woe_wifi_tiangong: Hisilicon woe wifi driver init SUCC

woe dev module commit_id:1195a7f5

init micro msg succ

woe_dev woe_dev: Hisilicon woe driver init

mount file system start

mount file system end

permission adapt start

chown: /config/conf: Read-only file system

chown: /config/custom: Read-only file system

permission adapt end

The board info is vendor_id=upt, chip_id=tiangong1, board_id=4331168(0x4216a0)

The board.xml is exist, keep old board.xml

init board

sysctl_conf start

sysctl_conf end

ln /etc/localtime

rm: can't remove '/etc/localtime': No such file or directory

[HI_APPM] ########### Appm Start Begin ###########

appm init begin

ln: /usr/httpd/web/web_log/log: Read-only file system

tar: removing leading '/' from member names

ln: /usr/httpd/web/webcmcc/config_file.tar.gz: No such file or directory

begin ctcc_smart_prepare !!!

gateway module commit_id:d671f5d6

 hi_notify_init succ

jffs2: Empty flash at 0x009a2a98 ends at 0x009a3000

hsan_boot (681): drop_caches: 3

[HI_APPM] [succ] init script

[HI_APPM] [succ] init path

[HI_APPM] [succ] init lib

[HI_APPM] [succ] init app

[HI_APPM] [succ] init group

[HI_APPM] [succ] init db

[HI_APPM] [succ] new process(749)

[HI_APPM] [succ] <0>  sysinfo

[HI_APPM] [succ] start sysinfo

[HI_APPM] [succ] new process(751)

[HI_APPM] [succ] <0>  syslog

[HI_APPM] [succ] <1>  crashlog

[HI_APPM] [succ] start syslog

[HI_APPM] [succ] new process(769)

[HI_APPM] [succ] <0>  sysstat

[HI_APPM] [succ] start sysstat

[HI_APPM] [succ] new process(770)

[HI_APPM] [succ] <0>  encrypt

[HI_APPM] [succ] start encrypt

[HI_APPM] [succ] new process(772)

[HI_APPM] [succ] <0>  board

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[1]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[2]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[3]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[4]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[5]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[6]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[7]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[8]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[9]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[11]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[12]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[13]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[14]

[LED]Led init suc!!! Led data num = 2

[HI_APPM] [succ] <1>  led

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[17]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[19]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[17]

[HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[19]

[HI_APPM] [succ] <2>  key

[HI_APPM] [succ] start ext_dev

[HI_APPM] [succ] new process(775)

Router mode

url_init

cfe xtables install succ!

[WAN_ERR:hi_wan_port_attacth_netdev(332)]ifname  port 00000008 not in global ports

[HI_APPM] [succ] <0>  wan

Illegal target name 'DNS_DNAT_PORTAL'.

Illegal target name 'DNS_DNAT_PORTAL'.

lan init succ

[HI_APPM] [succ] <1>  lan

[HI_APPM] [succ] start wan_lan

[HI_APPM] [succ] new process(1073)

[HI_APPM] [succ] <0>  wlan

insmod hostlimit succ!! 

wifi_version tiangong1&2 loading

hslink module commit_id:4319684c

[low_power_init]low_power_init: success

[HI_APPM] [succ] <1>  lanhost

[HI_APPM] [succ] start host

[HI_APPM] [succ] new process(1138)

hi_qos_init ui_nf_conntrack_max= 61000

wlan_pm_open chip_id[0]

region_info->resource NULL, base 0x26000000, 2097152, WIFI_PERI

region_info->resource NULL, base 0x18200000, 4096, WIFI_GLB_CTL

bus_msg_init success.

plat_chip_chn_init success.

[wlan_pm_init]wlan_pm_init ok!

enter firmware_download_function

download firmware file buf len is [524288]

path=/lib/firmware/hi_wifi/FIRMWARE.bin

path=/lib/firmware/hi_wifi/WCPU_DDR.bin

finish download firmware

firmware_download success

download firmware, count [1], current time [352128]us, max time [352128]us

[wlan_power_on]power on, count [1], current time [358784]us, max time [358784]us

plat_excp_info_msg_process

DEVICE EXCP_INFO

Device plat ready! chip id : 0

wlan_pm_open SUCC chip_id[0]

multi_chip_loading SUCC!

custom_main_init:: chip_id=[0], len=[5336]

not exist or contain wrong characters or end of file: magic_num

ini_find_modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini failed!!!

[WIFI_MAIN]{hal_cali_file_fill:: chip_id =0!} 

[HI_APPM] [succ] <0>  qos

[HI_APPM] [succ] start qos

[HI_APPM] [succ] new process(1238)

random: fast init done

[HI_APPM] [succ] <0>  sec

Thu Jan  1 08:01:00 GMT-8 1970

[HI_APPM] [succ] <1>  netapp

[HI_APPM] [succ] <2>  emu

[HI_APPM] [succ] start netapp

[HI_APPM] [succ] new process(1344)

[HI_APPM] [succ] <0>  upgrade

[HI_APPM] [succ] <1>  download

[HI_APPM] [succ] start netservice

[HI_APPM] [succ] new process(1346)

#Init cm moudle# 

# Load CM config file#

read deny!

read deny!

read deny!

Load Config from default file ...

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir SECUR_URL_FILTER_DBUS_LIST_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir SECUR_URL_FILTER_DBUS_LIST_TAB

Config_parser Succ.

Load Config from factory config file ...

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB

[XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB

Config_parser Succ.

Load Config from preconf.xml config file ...

Config_parser Succ.

Load Config Default Succ.

Config load Succ!

############ Start Distribute CM Config data  ############

[sysuptime: 15] Distribute Early!

mkdir: can't create directory '/opt/': Read-only file system

fail to open the file /opt/upt/apps/info/reboot_info 2 

[HI_APPM] [succ] <0>  odl

[HI_APPM] [succ] start cm

[HI_APPM] [succ] init env

[HI_APPM] [succ] init cmd

[HI_APPM] [succ] init monitor

[HI_APPM] ########### Appm Start End ###########

parse 73 domain_name =  para = router.ctc, 0xbe86fec4

[sysuptime: 16] Start init cm remote management module!

device wan_4096 is already a member of a bridge; can't enslave it to bridge br0.

udhcpc: started, v1.27.2

udhcpc: [62197] sending discover

parse 73 domain_name =  para = router.ctc, 0xbee8fec4

parse 73 domain_name =  para = router.ctc, 0xbe929ec4

[May  6 2025-15:17:11], Receive Wan Connection Add Event, WanName [1_INTERNET_B_VID_].

 error=0x7000000e function=__qos_wan_mixapp_add line=858

udhcpc: [63165] sending discover

parse 73 domain_name =  para = router.ctc, 0xbe9a8ec4

[WIFI_MAIN]wifi_init SUCC!

hmac_init_np_soft_ba_addr:addr:0

[WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=0 amsdu_num=16

[WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=1 amsdu_num=16

5g the cali result to device  succ 

{hmac_save_cali_data_to_file:: ret =35629!} 

hdpp_hslink_notify_init: succ

excp wifi callback register chip0

iwpriv Hisilicon0 alg set_2g_dpd_power_param 016e0168 0170016b 0176016f 0161015d 01640160 016b0164

Hisilicon0  alg:[SUCC]

iwpriv Hisilicon0 alg set_2g_dpd_low_power_param 014b0154 0158015b 014d0151 014e0153 01470151 01560155

Hisilicon0  alg:[SUCC]

iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000000 01400140 01400140 01420141 0140013a 013a013a 01400138 013e013f 01400140 0140013d 0140013f 01390139 0140013b 013d013d 0140013c 01400140 01370140 01400140 013e0140

Hisilicon0  alg:[SUCC]

iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000000 01400140 01400140 012c012c 0140012e 012d012e 0140012e 01310131 01400130 012f012f 01400129 012c0129 0140012d 012c012d 0140012b 01400140 01290140 01400140 00000000

Hisilicon0  alg:[SUCC]

iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000001 01360136 01360136 01410140 0136013c 013f013b 0136013d 01430142 01360142 01490148 01360148 013c0140 0136013f 013f0143 01360142 01360136 013c0136 01360136 01440136

Hisilicon0  alg:[SUCC]

iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000001 01360136 01360136 0130012d 01360131 01330132 01360133 01330133 01360133 01340134 01360132 012e0132 01360131 012c0130 0136012e 01360136 01320136 01360136 00000000

Hisilicon0  alg:[SUCC]

iwpriv Hisilicon0 alg set_xo_ppm_cali_param 00004040

Hisilicon0  alg:[SUCC]

iwpriv Hisilicon0 alg set_rssi_param 00000000 00000000 00000000 00000000 00000000 00000000 00000204 00000000 00080000 00000000

Hisilicon0  alg:[SUCC]

tiangong1 wifi_version

killall: phddns: no process killed

############igdCmWanConnectionOption125Init Start ############

lTotalNum [0].

############WanConnectionOption125 Attribute Table Init End ############

############igdCmWanConnectionOption16Init Start ############

lTotalNum [0].

############WanConnectionOption16 Attribute Table Init End ############

############igdCmWanConnectionOption17Init Start ############

lTotalNum [0].

############WanConnectionOption17 Attribute Table Init End ############

igdCmWanConnectionIPFwdRouteInit OK.

[sysuptime: 17] Distribute Main!

[XML_ERR:_mib_chain_get(235)] getXMLDir(471) fail!

[HI_IPC] ipc call hi_hi_netif_set_ddos_rule_call fail, pid 0 ret 90000000, data0[3175010]

udhcpc: [64135] sending discover

[sysuptime: 18] Distribute Medium!

vap0      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap0      alg:[SUCC]min prop = 1

chip id is 0cfgFile file is /var/hostapd_wlan0_vap0.conf

logFile file is /var/hostapd_wlan0_vap0.log

vap8      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap8      alg:[SUCC]min prop = 1

chip id is 1cfgFile file is /var/hostapd_wlan1_vap8.conf

logFile file is /var/hostapd_wlan1_vap8.log

INFO::[NULL:97 nlc_wksp_init]create socket succ

INFO::[NULL:68 nlc_netlink_create]netlink_create

INFO::[NULL:70 nlc_netlink_create]nlc_netlink_create: netlink id[25]!

INFO::[NULL:78 nlc_netlink_create]netlink socket create succ

INFO::[NULL:86 nlc_netlink_create]bind netlink socket succ

INFO::[NULL:243 nlc_netlink_recv_pthread]enter netlink_recv_pthread

hostpad_pid is 1873

pid 1873's current affinity mask: 633a60

pid 1873's new affinity mask: 633a60

random: hostapd: uninitialized urandom read (20 bytes read)

killall: app_acs: no process killed

INFO::[NULL:54 nlc_msg_add_app_handler]app type:8 event type:2

INFO::[NULL:55 nlc_msg_add_app_handler]register port=38030

INFO::[NULL:125 nlc_node_register]****************

INFO::[NULL:144 nlc_node_register]

__hi_wifi_mode_set 14

INFO::[NULL:54 nlc_msg_add_app_handler]app type:3 event type:2

INFO::[NULL:55 nlc_msg_add_app_handler]register port=46332

INFO::[NULL:125 nlc_node_register]****************

INFO::[NULL:144 nlc_node_register]

del br vap0

hostapd_cli_remove: REMOVE vap0

OK

del br vap0

hostapd_cli_remove: REMOVE vap0

OK

del br vap0

hostapd_cli_remove: REMOVE vap0

OK

del br vap0

hostapd_cli_remove: REMOVE vap0

OK

vap0      alg:[SUCC]pow_mode = init

auto rate

__hi_wifi_comm_attr_submit

hostapd_cli_remove: REMOVE vap0

OK

[HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069702988 ret 90000000, data0[812671350]

[WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 0

udhcpc: no lease, failing

hostapd_cli_remove: REMOVE vap8

OK

[HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069702988 ret 90000000, data0[946889078]

[WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 4

__hi_wifi_mode_set 15

del br vap8

hostapd_cli_remove: REMOVE vap8

OK

del br vap8

rootif mld0 que_pri 0 get_sch fail

init qos info fail, ifname mld0

g_ssidnum_band[0]=4

g_ssidnum_band[1]=4

hostapd_cli_remove: REMOVE vap8

OK

del br vap8

hostapd_cli_remove: REMOVE vap8

OK

del br vap8

hostapd_cli_remove: REMOVE vap8

OK

vap8      alg:[SUCC]pow_mode = init

auto rate

__hi_wifi_comm_attr_submit

Sorry, rule does not exist.

parse 73 domain_name =  para = router.ctc, 0xbef38ec4

iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.

iptables: No chain/target/match by that name.

iptables: No chain/target/match by that name.

iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.

Another app is currently holding the xtables lock. Perhaps you want to use the -w option?

Another app is currently holding the xtables lock. Perhaps you want to use the -w option?

commit_proc: flag=2

ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory

Try `ip6tables -h' or 'ip6tables --help' for more information.

ip6tables: No chain/target/match by that name.

ip6tables: No chain/target/match by that name.

ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory

Try `ip6tables -h' or 'ip6tables --help' for more information.

ip6tables: No chain/target/match by that name.

ip6tables: No chain/target/match by that name.

lMeshParaChanged = 0

vap en is 1

[WLAN_DBG_ERR:hi_wifi_mld_vap_restart(736)]link_vap_2g->ui_vap_en=1 link_vap_5g->ui_vap_en=0

Sorry, rule does not exist.

lMeshParaChanged = 0

vap en is 0

del br vap1

hostapd_cli_remove: REMOVE vap1

OK

Sorry, rule does not exist.

lMeshParaChanged = 0

vap en is 0

del br vap2

hostapd_cli_remove: REMOVE vap2

OK

Sorry, rule does not exist.

lMeshParaChanged = 0

vap en is 0

del br vap3

hostapd_cli_remove: REMOVE vap3

OK

Sorry, rule does not exist.

iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No hrtimer: interrupt took 17125 ns

such file or directory

Try `iptables -h' or 'iptables --help' for more information.

iptables: No chain/target/match by that name.

iptables: No chain/target/match by that name.

iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.

iptables: No chain/target/match by that name.

iptables: No chain/target/match by that name.

ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory

Try `ip6tables -h' or 'ip6tables --help' for more information.

ip6tables: No chain/target/match by that name.

ip6tables: No chain/target/match by that name.

ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory

Try `ip6tables -h' or 'ip6tables --help' for more information.

ip6tables: No chain/target/match by that name.

ip6tables: No chain/target/match by that name.

lMeshParaChanged = 1

vap en is 1

del br mld0 link_vap_2g: vap0, link_vap_5g: vap8

 cfgFile file is /var/hostapd_wlan0_vap0.conf

logFile file is /var/hostapd_wlan0_vap0.log

cfgFile file is /var/hostapd_wlan1_vap8.conf

logFile file is /var/hostapd_wlan1_vap8.log

hostapd_cli_remove: REMOVE vap8

OK

hostapd_cli_remove: REMOVE vap0

OK

hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf

Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY

rfkill: Cannot open RFKILL control device

vap8: interface state UNINITIALIZED->COUNTRY_UPDATE

hwifi_read_nv_config:find modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini tag_index:13 err!!!

Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/Arandom: hostapd: uninitialized urandom read (31 bytes read)

ll: nonexistent directory

wpa_drandom: hostapd: uninitialized urandom read (1024 bytes read)

river_nl80211_wps_status[1669]

random: hostapd: uninitialized urandom read (31 bytes read)

vap8: interface state COUNTRY_UPDATE->ENABLED

vap8: AP-ENABLED 

OK

hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf

Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY

rfkill: Cannot open RFKILL control device

vap0: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

vap0: interface state COUNTRY_UPDATE->ENABLED

vap0: AP-ENABLED 

hostapd_mld_start: curr vap0 state:1

OK

vap0      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap0      alg:[SUCC]min prop = 1

vap8      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap8      alg:[SUCC]min prop = 1

add br mld0 link_vap_2g: vap0, link_vap_5g: vap8

parse 73 domain_name =  para = router.ctc, 0xbeb2eec4

lMeshParaChanged = 0

 vap en is 0

del br vap9

hostapd_cli_remove: REMOVE vap9

OK

Sorry, rule does not exist.

lMeshParaChanged = 0

vap en is 0

del br vap10

hostapd_cli_remove: REMOVE vap10

OK

Sorry, rule does not exist.

lMeshParaChanged = 0

vap en is 0

del br vap11

hostapd_cli_remove: REMOVE vap11

OK

lMeshParaChanged = 0

vap en is 0

del br vap2

hostapd_cli_remove: REMOVE vap2

OK

iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.

iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.

sh: can't create /proc/wlan_share/config: nonexistent directory

sh: can't create /proc/wlan_share/config: nonexistent directory

sh: can't create /proc/wlan_share/config: nonexistent directory

lMeshParaChanged = 0

iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.

vap en is 0

del br vap10

iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.

sh: can't create /proc/wlan_share/config: nonexistent directory

sh: can't create /proc/wlan_share/config: nonexistent directory

sh: can't create /proc/wlan_share/config: nonexistent directory

uiRepeaterEnable [1] ulRepeaterModeType[4]

set g_repeater_mlo_mode to 0

hostapd_cli_remove: REMOVE vap10

OK

g_ui_sta24:0 g_ui_sta58:0 g_mld_sta:0

rootif vap20 que_pri 0 get_sch fail

init qos info fail, ifname vap20

rootif vap50 que_pri 0 get_sch fail

init qos info fail, ifname vap50

pid 2526's current affinity mask: 5d3a60

pid 2526's new affinity mask: 5d3a60

success: IGD_CM_OPERATE_SUCCESS.	

[CM:SYSEVENT:error:hi_notifier_ipc_264_hi_odl(298)]  #### hi_notifier_ipc_264_hi_odl  298  6  ==========

pid 2552's current affinity mask: 5c3a60

pid 2552's new affinity mask: 5c3a60

killall: easymesh: no process killed

bandsteering_enable1

ip6tables v1.8.2 (legacy): Couldn't load match `ipv6header':No such file or directory

Try `ip6tables -h' or 'ip6tables --help' for more information.

nf_conntrack_rtsp v0.7 loading

nf_nat_rtsp v0.7 loading

commit_proc: flag=1

TELNET_ENABLE: 1 TELNET_PORT: 23

killall: telnetd: no process killed

sh: syntax error: unexpected "("

SSH_ENABLE: 0  SSH_USER:   SSH_PASSWD:  SSH_PORT: 

killall: dropbear: no process killed

killall: crond: no process killed

[sysuptime: 26] Distribute Tardy!

ulIPver: 0 ulPingCnt: 4 ulBlkSize: 56 ulTimeout: 10000 ulInterval: 0 acWanIf:  acHost: 

pc_waninterface: 

ifname:  host: 

CM RepNum: 5

INFO [HI_EmAgentApiInit:431]HI_EmAgentApiInit success

[XML_WRN:_mib_chain_get(243)] recordNum(0), id(699), final_idx(0), pCurr(0), pCurr->pData(0)

nslookup: can't resolve '(null)'

hsan login: [sysuptime: 27] Distribute Finish!

vap0: INTERFACE-DISABLED 

Start webserver now

[UNICOM API: hi_unicomapi_init]

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.wifi.1.ap.1 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.wifi.1.ap.2 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.wifi.1.ap.3 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.wifi.1.ap.4 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.wifi.1.ap.5 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.wifi.1.ap.6 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.wifi.1.ap.7 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.wifi.1.ap.8 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_load_existing_lan(349)]hi_load_existing_lan 349 fail!

[UBUS:hi_load_existing_lan(364)]hi_load_existing_lan 364 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.laninfo.1 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

1970-01-01 08:01:13.338 [debug] init_run: start appd (/bin/appd)

del br mld0 link_vap_2g: vap0, link_vap_5g: vap8

vap8: INTERFACE-DISABLED 

 cfgFile file is /var/hostapd_wlan0_vap0.conf

logFile file is /var/hostapd_wlan0_vap0.log

cfgFile file is /var/hostapd_wlan1_vap8.conf

logFile file is /var/hostapd_wlan1_vap8.log

hostapd_cli_remove: REMOVE vap8

Remove interface 'vap8'

vap8: interface state ENABLED->DISABLED

vap8: AP-DISABLED 

vap8: CTRL-EVENT-TERMINATING 

Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!!

nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0

nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument

OK

hostapd_cli_remove: REMOVE vap0

Remove interface 'vap0'

vap0: interface state ENABLED->DISABLED

vap0: AP-DISABLED 

vap0: CTRL-EVENT-TERMINATING 

Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!!

nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0

OK

hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf

Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY

rfkill: Cannot open RFKILL control device

vap8: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

vap8: interface state COUNTRY_UPDATE->ENABLED

vap8: AP-ENABLED 

OK

hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf

Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY

rfkill: Cannot open RFKILL control device

vap0: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

vap0: interface state COUNTRY_UPDATE->ENABLED

vap0: AP-ENABLED 

hostapd_mld_start: curr vap0 state:1

OK

vap0      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap0      alg:[SUCC]min prop = 1

vap8      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap8      alg:[SUCC]min prop = 1

add br mld0 link_vap_2g: vap0, link_vap_5g: vap8

 del br vap1

hostapd_cli_remove: REMOVE vap1

OK

del br vap2

hostapd_cli_remove: REMOVE vap2

OK

del br vap3

parse 73 domain_name =  para = router.ctc, 0xbe99fec4

hostapd_cli_remove: REMOVE vap3

OK

vap0: INTERFACE-DISABLED 

vap0      alg:[SUCC]pow_mode = init

auto rate

vap0: INTERFACE-ENABLED 

__hi_wifi_comm_attr_submit

vap8: INTERFACE-DISABLED 

del br mld0 link_vap_2g: vap0, link_vap_5g: vap8

vap0: INTERFACE-DISABLED 

 cfgFile file is /var/hostapd_wlan0_vap0.conf

logFile file is /var/hostapd_wlan0_vap0.log

cfgFile file is /var/hostapd_wlan1_vap8.conf

logFile file is /var/hostapd_wlan1_vap8.log

hostapd_cli_remove: REMOVE vap8

Remove interface 'vap8'

vap8: interface state ENABLED->DISABLED

vap8: AP-DISABLED 

vap8: CTRL-EVENT-TERMINATING 

Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!!

nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0

nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument

OK

hostapd_cli_remove: REMOVE vap0

Remove interface 'vap0'

vap0: interface state ENABLED->DISABLED

vap0: AP-DISABLED 

vap0: CTRL-EVENT-TERMINATING 

Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!!

nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0

OK

hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf

Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY

rfkill: Cannot open RFKILL control device

vap8: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

vap8: interface state COUNTRY_UPDATE->ENABLED

vap8: AP-ENABLED 

OK

hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf

Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY

rfkill: Cannot open RFKILL control device

vap0: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

vap0: interface state COUNTRY_UPDATE->ENABLED

vap0: AP-ENABLED 

hostapd_mld_start: curr vap0 state:1

OK

vap0      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap0      alg:[SUCC]min prop = 1

vap8      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap8      alg:[SUCC]min prop = 1

add br mld0 link_vap_2g: vap0, link_vap_5g: vap8

 del br vap9

hostapd_cli_remove: REMOVE vap9

OK

del br vap10

hostapd_cli_remove: REMOVE vap10

OK

del br vap11

hostapd_cli_remove: REMOVE vap11

OK

parse 73 domain_name =  para = router.ctc, 0xbed5eec4

vap8: INTERFACE-DISABLED 

vap8      alg:[SUCC]pow_mode = init

auto rate

vap8: INTERFACE-ENABLED 

__hi_wifi_comm_attr_submit

Invalid command : bsd_5g_load

[CM:SYSEVENT:error:hi_notifier_ipc_264_hi_odl(298)]  #### hi_notifier_ipc_264_hi_odl  298  8  ==========

[UBUS:hi_ubus_signal_proc(138)]hi_ubus_signal_proc 138 fail  1!

[UBUS:hi_ubus_signal_proc(141)]hi_ubus_signal_proc 141 fail!

[UBUS:hi_ctcapd_signal_laninfo(418)]hi_ctcapd_signal_laninfo 418 fail!

[UBUS:hi_ctcapd_signal_laninfo(421)]hi_ctcapd_signal_laninfo 421 fail!

[UBUS:hi_ctcapd_signal_laninfo(428)]hi_ctcapd_signal_laninfo 428 fail!

[UBUS:hi_ubus_signal_proc(145)]hi_ubus_signal_proc 145 fail!

[UBUS:_ubus_notify_handler(47)]'ctcapd.laninfo' 'devicestatus' '{"mac":"00:e0:70:c6:73:49","active":0}'

nslookup: can't resolve 'cn.pool.ntp.org'

commit_proc: flag=2

nslookup: can't resolve '(null)'

[CM:SYSEVENT:error:hi_notifier_ipc_264_hi_odl(298)]  #### hi_notifier_ipc_264_hi_odl  298  6  ==========

[UBUS:hi_ubus_signal_proc(138)]hi_ubus_signal_proc 138 fail  1!

[UBUS:hi_ubus_signal_proc(141)]hi_ubus_signal_proc 141 fail!

[UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail!

[UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70   ctcapd.laninfo.1 fail!

[UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail!

[UBUS:hi_ctcapd_signal_laninfo(428)]hi_ctcapd_signal_laninfo 428 fail!

[UBUS:hi_ubus_signal_proc(145)]hi_ubus_signal_proc 145 fail!

[UBUS:_ubus_notify_handler(47)]'ctcapd.laninfo' 'newdevice' '{"mac":"00:e0:70:c6:73:49","vmac":"","connecttype":0,"port":2,"hostname":""}'

[UBUS:_add_laninfo_obj(441)]hi_dynamically_add_object error

commit_proc: flag=1

nslookup: can't resolve 'cn.pool.ntp.org'

nslookup: can't resolve '(null)'

INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:4.

INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:1.

INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:6.

INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:5.

nslookup: can't resolve 'cn.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'asia.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'asia.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'asia.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

detect internet dns failed, waiting...

nslookup: can't resolve '(null)'

nslookup: can't resolve 'cn.pool.ntp.org'

hsan login: nslookup: can't resolve '(null)'

hsan login: root

login: can't change directory to '/root'

-ash: smart_env: not found

/ # ubuscnslookup: can't resolve 'cn.pool.ntp.org'                                                                                                                                                                                      nslookup: can't resolve '(null)'

-ash: ubu: not found

/ # 

/ # 

/ # ubus list

apmaintain

apu01

ctcapd

ctcapd.appd

ctcapd.devinfo

ctcapd.diagnostics

ctcapd.filter.dns

ctcapd.initd

ctcapd.iptv

ctcapd.laninfo

ctcapd.laninfo.1

ctcapd.ledswitch

ctcapd.neighbourinfo

ctcapd.qos

ctcapd.qos.classification

ctcapd.usb.device

ctcapd.usb.filesystem

ctcapd.usb.samba

ctcapd.waninfo

ctcapd.wifi

ctcapd.wifi.1

ctcapd.wifi.1.ap

ctcapd.wifi.1.ap.1

ctcapd.wifi.1.ap.2

ctcapd.wifi.1.ap.3

ctcapd.wifi.1.ap.4

ctcapd.wifi.1.ap.5

ctcapd.wifi.1.ap.6

ctcapd.wifi.1.ap.7

ctcapd.wifi.1.ap.8

ctcapd.wifi.2

ctcapd.wifi.blacklist

ctcapd.wifi.mesh

ctcapd.wifi.roaming

ctcapd.wifi.timer

ctcapd.wifi.timerext

ctcapd.wifi.vsie

ctcapd.wifi.vsie.beacontx

ctcapd.wifi.vsie.proberesp

ctcapd.wifi.vsie.proberx

ctcapd.wifi.whitelist

elinkclt

qlink

/ # nslookup: can't resolve 'cn.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'asia.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'asia.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'asia.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

random: crng init done

random: 6 urandom warning(s) missed due to ratelimiting

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'cn.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'cn.pool.ntp.org'

nslookup: can't resolve '(null)'

g_ssidnum_band[0]=4

g_ssidnum_band[1]=4

Invalid command : bsd_5g_load

nslookup: can't resolve 'cn.pool.ntp.org'

<hi_web_var_chk:2236>name[password], ERR code[8]

<hi_web_var_chk:2236>name[admin_password], ERR code[8]

oldModeType [4] --> ulModeType [4].

[UBUS:hi_ubus_signal_proc(138)]hi_ubus_signal_proc 138 fail  9!

[UBUS:hi_ubus_signal_proc(141)]hi_ubus_signal_proc 141 fail!

lMeshParaChanged = 0

[UBUS:hi_ubus_signal_proc(145)]hi_ubus_signal_proc 145 fail!

vap en is 1

del br mld0 link_vap_2g: vap0, link_vap_5g: vap8

lMeshParaChanged = 0

vap0: INTERFACE-DISABLED 

vap8: INTERFACE-DISABLED 

 cfgFile file is /var/hostapd_wlan0_vap0.conf

logFile file is /var/hostapd_wlan0_vap0.log

cfgFile file is /var/hostapd_wlan1_vap8.conf

logFile file is /var/hostapd_wlan1_vap8.log

hostapd_cli_remove: REMOVE vap8

Remove interface 'vap8'

vap8: interface state ENABLED->DISABLED

vap8: AP-DISABLED 

vap8: CTRL-EVENT-TERMINATING 

Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!!

nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0

nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument

OK

hostapd_cli_remove: REMOVE vap0

Remove interface 'vap0'

vap0: interface state ENABLED->DISABLED

vap0: AP-DISABLED 

vap0: CTRL-EVENT-TERMINATING 

Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!!

nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0

OK

nslookup: can't resolve '(null)'

hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf

Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY

rfkill: Cannot open RFKILL control device

vap8: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

vap8: interface state COUNTRY_UPDATE->ENABLED

vap8: AP-ENABLED 

OK

hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf

Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY

rfkill: Cannot open RFKILL control device

vap0: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

vap0: interface state COUNTRY_UPDATE->ENABLED

vap0: AP-ENABLED 

hostapd_mld_start: curr vap0 state:1

OK

vap0      alg:[UBUS:hi_ubus_signal_proc(138)]hi_ubus_signal_proc 138 fail  9[SUCC]atf_mode set succ !!!  mode = [2]

!

[UBUS:hi_ubus_signal_proc(141)]hi_ubus_signal_proc 141 fail!

[UBUS:hi_ubus_signal_proc(145)]hi_ubus_signal_proc 145 fail!

vap0      alg:[SUCC]min prop = 1

vap8      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap8      alg:[SUCC]min prop = 1

add br mld0 link_vap_2g: vap0, link_vap_5g: vap8

 vap en is 1

del br mld0 link_vap_2g: vap0, link_vap_5g: vap8

parse 73 domain_name =  para = router.ctc, 0xbebf8ec4

vap0: INTERFACE-DISABLED 

vap8: INTERFACE-DISABLED 

 cfgFile file is /var/hostapd_wlan0_vap0.conf

logFile file is /var/hostapd_wlan0_vap0.log

cfgFile file is /var/hostapd_wlan1_vap8.conf

logFile file is /var/hostapd_wlan1_vap8.log

hostapd_cli_remove: REMOVE vap8

Remove interface 'vap8'

vap8: interface state ENABLED->DISABLED

vap8: AP-DISABLED 

vap8: CTRL-EVENT-TERMINATING 

Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!!

nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0

nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument

OK

hostapd_cli_remove: REMOVE vap0

Remove interface 'vap0'

vap0: interface state ENABLED->DISABLED

vap0: AP-DISABLED 

vap0: CTRL-EVENT-TERMINATING 

Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!!

nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0

OK

hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf

Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY

rfkill: Cannot open RFKILL control device

vap8: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

vap8: interface state COUNTRY_UPDATE->ENABLED

vap8: AP-ENABLED 

OK

hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf

Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY

rfkill: Cannot open RFKILL control device

vap0: interface state UNINITIALIZED->COUNTRY_UPDATE

Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80"

sh: can't create /proc/wifilog/connect/All: nonexistent directory

wpa_driver_nl80211_wps_status[1669]

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

nl80211: kernel reports: integer out of range

vap0: interface state COUNTRY_UPDATE->ENABLED

vap0: AP-ENABLED 

hostapd_mld_start: curr vap0 state:1

OK

vap0      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap0      alg:[SUCC]min prop = 1

vap8      alg:[SUCC]atf_mode set succ !!!  mode = [2]

vap8      alg:[SUCC]min prop = 1

add br mld0 link_vap_2g: vap0, link_vap_5g: vap8

parse 73 domain_name =  para = router.ctc, 0xbebe8ec4

Interface doesn't accept private ioctl...

get_noise (8BE1): Invalid argument

commit_proc: flag=6

nslookup: can't resolve 'asia.pool.ntp.org'

Interface doesn't accept private ioctl...

get_noise (8BE1): Invalid argument

nslookup: can't resolve '(null)'

nslookup: can't resolve 'asia.pool.ntp.org'

Interface doesn't accept private ioctl...

get_noise (8BE1): Invalid argument

nslookup: can't resolve '(null)'

nslookup: can't resolve 'asia.pool.ntp.org'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

nslookup: can't resolve '(null)'

nslookup: can't resolve 'query.hicloud.com'

nslookup: can't resolve '(null)'

open version.txt error!

size of linux : 54525952

>>>>>>>>>>>>>>upgrade flagcount = 0 

start image write file!

em_flag = 0 ui_len = 36175872 ac_filename = /tmp/web_post_file !

upgrade starting ... ac_filename=/tmp/web_post_file, len=36175872, offset=166, flag=0

--pst_header->auc_head_crc b6e36cd4 ui_hear_crc a2975652 ui_crc a2975652!!!---

--upgrade header crc check ok!!!---

--ui_package_length = 36015764 pui_len = 36015764!!!---

--board chip is tiangong1, firmware chip is tiangong1---

--gui_one_track 0!!!---

--esbc   len  0 offset 0---

--boot   len  0 offset 0---

--kernel len  5474520 offset 1630---

--rootfs len  30539776 offset 5476150---

--java   len  0 offset 0---

--default len 0 offset 0---

the web pkg doesn't contain ctfwk patition !

--Start packet crc check!!!---

nslookup: can't resolve 'cn.pool.ntp.org'

--ui_package_crc = 0x85a20459 ui_package_checksum = 0x85a20459---

--packet crc check ok!!---

bootfile = ctc

--__upgrade_boot_write chip_id = tiangong1---

__upgrade_file_write:938 em_flag 0

--ul_offset = 1630!!! badoff=0 len=5474520---

nslookup: can't resolve '(null)'

--ul_offset = 5476150!!! badoff=0 len=30539776---

nslookup: can't resolve 'cn.pool.ntp.org'

nslookup: can't resolve '(null)'

upgrade flag:0 bootreg:10

cmd_version:HiHANLinuxV100R003C01SPC010

sw_version:V2.1.1

sed: /config/work/upgrade_state.txt: No such file or directory

gui_upgrade_finish = 1

--upgrade succ!---

sendUbusMsg failed.

mkdir: can't create directory '/opt/': Read-only file system

fail to open the file /opt/upt/apps/info/reboot_info 2 

[HI_IPC] ipc call hi_IPC_igdCmRebootInfo_call fail, pid 1346 ret ffffffff, data0[536870925]

killall: udhcpc: no process killed

killall: pppd: no process killed

nslookup: can't resolve 'cn.pool.ntp.org'

nslookup: can't resolve '(null)'

killall: cms: no process killed

reboot: Restarting system

HI, BSBC!

P:3101

P:1013

P:1018

P:3202

P:3700

P:3203

P:3204

P:1021

hi-esbc start

 boot_info.value  a0000.....

 boot mode 2......

match board UPTV1D0_BE3600, board_id_val 4216a0

 sec init

spi hw init succ

??oot_info.value  a0000.....

 flash boot mode ......

 hi_nand_probe......

 Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] 

 read_addr_cycle[05] 

 read_if_type[00] 

 read_dummy_num[01] 

 read_cmd[03] 

 uboot_region_size [100000]......

 This boot is main region 0 area......

nand read oob: offset 0x80000

 nand read: offset 0x80000 size 0x1000 to addr 0x17510438 

nand read oob: offset 0x80000

nand read oob: offset 0x80000

 nand read: offset 0x81000 size 0x100 to addr 0x17511438 

nand read oob: offset 0x80000

nand read oob: offset 0x80000

 nand read: offset 0x81100 size 0x1bf0 to addr 0x17511538 

 normal boot......

 no secure boot, dont check sign......

 no secure boot, dont check code image.....

 start ddrinit from addr 17511538

 ddrinit finish

 This boot is main region 0 area......

nand read oob: offset 0x80000

nand read oob: offset 0x80000

 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 

nand read oob: offset 0x80000

nand read oob: offset 0x80000

 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 

nand read oob: offset 0x80000

nand read oob: offset 0x80000

nand read oob: offset 0xa0000

nand read oob: offset 0xc0000

nand read oob: offset 0xe0000

 nand read: offset 0x83df0 size 0x783d8 to addr 0x80102000 

 dont decrypt boot code......

 no secure boot, dont check sign......

 no secure boot, dont check code image.....

 check nvcnt......

 check version start......

There is no version in efuse

 dice not support......

subkey_id = 0x00

esbc_mask = 0x01

bl_nvcnt  = 0x01

 start to uboot......

U-Boot 2022.07 (May 06 2025 - 15:17:07 +0800) for tiangong1

       Watchdog enabled

DRAM:  224 MiB

Core:  140 devices, 18 uclasses, devicetree: separate

NAND:  device found, Manufacturer ID: 0xe5, Chip ID: 0x71

Unknown DS35Q1GA

Unknown DS35Q1GA

128 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 64

128 MiB

Loading Environment from NAND... Scanning device for bad blocks

OK

In:    uart1@10119000

Out:   uart1@10119000

Err:   uart1@10119000

bootflag verify succ

Reset Info: Linux reboot cmd to reset

Net:   lsw_dp lsw_dp: lsw_dp probe succ

lsw_pfe lsw_pfe: lsw_pfe probe succ

hsan_mac gemac0@0: gemac0@0 probe succ

mdio_bus mdio0@0: mdio_register  mdio0@0

mdio_bus mdio0@0: mdio0@0 probe succ

Genius Phy hwVer:0x20669a22 fwVer:0x6e01

hsan_mac gemac1@1: gemac1@1 probe succ

hsan_mac gemac2@2: gemac2@2 probe succ

hsan_mac gemac3@3: gemac3@3 probe succ

hsan_mac gemac@8: gemac@8 probe succ

mdio_bus mdio1@1: mdio_register  mdio1@1

mdio_bus mdio1@1: mdio1@1 probe succ

hsan_pie pie: pie probe succ

eth0: pie

bootflag a bootreg 10

hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full

multiupg detect

bootdelay is 3000

Hit any key to stop autoboot:  0 

bootreg offset: c0c

boot regval: 10

boot from kernela and update reg to 11

hi_secboot_main

 sec init

 sec init succ

 drivers init succ

 boot_info.value  a0000.....

Size not on a page boundary (0x800), rounding to 0x800

Size not on a page boundary (0x800), rounding to 0x538000

 dont decrypt boot code......

 no secure boot, dont check sign......

 no secure boot, dont code check hash.....

 check nvcnt......

 check version start......

There is no version in efuse

 dice not support......

 flash boot succ......

uboot secboot exit

name:56190527, serial_number:edd5da7e

   Image Name:   Linux-5.10.0

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    5352624 Bytes = 5.1 MiB

   Load Address: 80208000

   Entry Point:  80208000

By default, the matching mode of hsan is used

Match dtbo succ, chip = hsan,tiangong1, boardid = 4331168, vendorid = upt

alias console=/uart1@10119000

serialnr->high=0x11, serialnr->low=0x10119000, atag_addr=0x80201000

SPI Nand Spec  : Chip[134217728B] Block[131072B] Page[2048B] OOB[64B] ECC[4bit] 

Chip Name  : DS35Q1GA

## Transferring control to Linux ...

Uncompressing Linux... done, booting the kernel.

Booting Linux on physical CPU 0x0

Linux version 5.10.0 (yliu@yliu) (arm-mix510-linux-gcc (musl-1.2.3 linux-5.10 V12CS61.003.020  2024-01-16 12:00:00) 10.3.0, GNU ld (GNU Binutils) 2.38) #2 SMP Thu Jul 10 14:42:19 CST 2025

CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c5387d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

OF: fdt: Machine model: hsan-tiangong1

OF: fdt: Ignoring memory range 0x80000000 - 0x80200000

earlycon: pl11 at MMIO 0x10119000 (options '')

printk: bootconsole [pl11] enabled

Memory policy: Data cache writealloc

OF: reserved mem: OVERLAP DETECTED!

fermion (0x80000000--0x80200000) overlaps with mem@0x80000000 (0x80000000--0x80200000)

Zone ranges:

  Normal   [mem 0x0000000080200000-0x000000008fffffff]

Movable zone start for each node

Early memory node ranges

  node   0: [mem 0x0000000080200000-0x000000008b3fffff]

  node   0: [mem 0x000000008d800000-0x000000008d8fffff]

  node   0: [mem 0x000000008e400000-0x000000008fffffff]

Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff]

mdesc->l2c_aux_val 430001 mdesc->l2c_aux_mask ffb0fffe

percpu: Embedded 20 pages/cpu s49932 r8192 d23796 u81920

Built 1 zonelists, mobility grouping on.  Total pages: 52420

Kernel command line: noinitrd console=ttyAMA0,115200 earlycon cma=0

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)

allocated 264192 bytes of page_ext

mem auto-init: stack:off, heap alloc:off, heap free:off

Memory: 194408K/211968K available (8404K kernel code, 1430K rwdata, 2712K rodata, 1372K init, 532K bss, 17560K reserved, 0K cma-reserved)

SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

rcu: Hierarchical RCU implementation.

	Tracing variant of Tasks RCU enabled.

rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.

NR_IRQS: 16, nr_irqs: 192, preallocated irqs: 192

L2C: platform modifies aux control register: 0x02030000 -> 0x02430001

L2C: DT/platform modifies aux control register: 0x02030000 -> 0x02430001

L2C: DT/platform tries to modify or specify cache size

L2C-310 erratum 769419 enabled

L2C-310 enabling early BRESP for Cortex-A9

L2C-310: enabling full line of zeros but not enabled in Cortex-A9

L2C-310 dynamic clock gating enabled, standby mode enabled

L2C-310 cache controller enabled, 16 ways, 256 kB

L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x46430001

random: get_random_bytes called from start_kernel+0x384/0x550 with crng_init=0

sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255550ns

clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e6a221d, max_idle_ns: 440795213442 ns

Switching to timer-based delay loop, resolution 3ns

clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 39817925974 ns

Ignoring duplicate/late registration of read_current_timer delay

Calibrating delay loop (skipped), value calculated using timer frequency.. 575.00 BogoMIPS (lpj=2875000)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)

CPU: Testing write buffer coherency: ok

CPU0: Spectre v2: using BPIALL workaround

CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

Setting up static identity map for 0x80208220 - 0x8020825c

rcu: Hierarchical SRCU implementation.

smp: Bringing up secondary CPUs ...

CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

CPU1: Spectre v2: using BPIALL workaround

smp: Brought up 1 node, 2 CPUs

SMP: Total of 2 processors activated (1150.00 BogoMIPS).

CPU: All CPU(s) started in SVC mode.

devtmpfs: initialized

clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

futex hash table entries: 512 (order: 3, 32768 bytes, linear)

pinctrl core: initialized pinctrl subsystem

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

thermal_sys: Registered thermal governor 'step_wise'

hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

hw-breakpoint: maximum watchpoint size is 4 bytes.

Serial: AMBA PL011 UART driver

OF: /gpio@10109000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag

OF: /gpio@1010a000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag

OF: /gpio@0x26006000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag

10119000.uart1: ttyAMA0 at MMIO 0x10119000 (irq = 203, base_baud = 0) is a SBSA

printk: console [ttyAMA0] enabled

printk: console [ttyAMA0] enabled

printk: bootconsole [pl11] disabled

printk: bootconsole [pl11] disabled

10118000.uart0: ttyAMA1 at MMIO 0x10118000 (irq = 204, base_baud = 12000000) is a PL011 rev2

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

NET: Registered protocol family 8

NET: Registered protocol family 20

clocksource: Switched to clocksource arm_global_timer

VFS: Disk quotas dquot_6.6.0

VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

FS-Cache: Loaded

CacheFiles: Loaded

NET: Registered protocol family 2

tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)

TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)

TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)

TCP: Hash tables configured (established 2048 bind 2048)

UDP hash table entries: 256 (order: 1, 8192 bytes, linear)

UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

NET: Registered protocol family 44

Initialise system trusted keyrings

workingset: timestamp_bits=14 max_order=16 bucket_order=2

squashfs: version 4.0 (2009/01/31) Phillip Lougher

ntfs: driver 2.1.32 [Flags: R/W DEBUG].

jffs2: version 2.2. (NAND) (SUMMARY)  ? 2001-2006 Red Hat, Inc.

fuse: init (API version 7.32)

Key type asymmetric registered

Asymmetric key parser 'x509' registered

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

loop: module loaded

libphy: Fixed MDIO Bus: probed

tun: Universal TUN/TAP device driver, 1.6

PPP generic driver version 2.4.2

PPP MPPE Compression module registered

NET: Registered protocol family 24

SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

CSLIP: code copyright 1989 Regents of the University of California.

SLIP linefill/keepalive option.

usbcore: registered new interface driver uas

usbcore: registered new interface driver usb-storage

GACT probability NOT on

Mirror/redirect action on

u32 classifier

    input device check on

    Actions configured

xt_time: kernel timezone is -0000

ipip: IPv4 and MPLS over IPv4 tunneling driver

Initializing XFRM netlink socket

NET: Registered protocol family 10

Segment Routing with IPv6

sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

NET: Registered protocol family 17

Bridge firewalling registered

l2tp_core: L2TP core driver, V2.0

l2tp_ppp: PPPoL2TP kernel driver, V2.0

l2tp_ip: L2TP IP encapsulation support (L2TPv3)

l2tp_netlink: L2TP netlink interface

l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)

l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)

8021q: 802.1Q VLAN Support v1.8

lib80211: common routines for IEEE802.11 drivers

Registering SWP/SWPB emulation handler

Loading compiled-in X.509 certificates

cfg80211: Loading compiled-in X.509 certificates for regulatory database

cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

Warning: unable to open an initial console.

cfg80211: failed to load regulatory.db

Freeing unused kernel memory: 1372K

Kernel memory protection not selected by kernel config.

Run /init as init process

hi_crg: loading out-of-tree module taints kernel.

[DFX]

 HSAN mlog_print function is unavailable...

Basic driver of Linux Kernel install successfully ...!

hi-reset reset0: resister reset device

hi-reset reset@1: resister reset device

hi-reset reset@2: resister reset device

hi-reset reset@3: resister reset device

hi-reset reset@4: resister reset device

hi-reset reset@5: resister reset device

hi-reset reset@6: resister reset device

hi-reset reset@7: resister reset device

hi-reset reset@8: resister reset device

hi-reset reset@9: resister reset device

102a0000.fmc_acp : ON

10103000.dmac0_acp : ON

12000000.sec_acp : ON

12080000.pie_acp : ON

watchdog: watchdog0 running and kernel based pre-userspace handler disabled

HSAN FMC Controller Device Driver, Version 100

15 fixed-partitions partitions found on MTD device 102a0000.fmc

Creating 15 MTD partitions on "102a0000.fmc":

0x000000000000-0x000000080000 : "esbc0_a"

0x000000080000-0x000000180000 : "uboota"

0x000000180000-0x000000280000 : "ubootb"

0x000000280000-0x000000300000 : "enva"

0x000000300000-0x000000380000 : "envb"

0x000000380000-0x000000580000 : "fac"

0x000000580000-0x000000780000 : "cfga"

0x000000780000-0x000000980000 : "cfgb"

0x000000980000-0x000000d80000 : "log"

0x000000d80000-0x000000e00000 : "pstore"

0x000000e00000-0x000001500000 : "kernela"

0x000001500000-0x000001c00000 : "kernelb"

0x000001c00000-0x000004900000 : "rootfsa"

0x000004900000-0x000007600000 : "rootfsb"