cfe lrn module commit_id:4319684c [CFE]CFE LRN module install successfully ...! l3 lib module commit_id:4319684c [CFE]L3 LIB module install successfully ...! l4 lib module commit_id:4319684c [CFE]L4 LIB module install successfully ...! l2tp lib module commit_id:4319684c [CFE]L2TP LIB module install successfully ...! pptp lib module commit_id:4319684c [CFE]PPTP LIB module install successfully ...! dslite lib module commit_id:4319684c [CFE]DSLITE LIB module install successfully ...! mc lib module commit_id:4319684c [CFE]MC LIB module install successfully ...! mc list module commit_id:4319684c [CFE]MC LIST module install successfully ...! vxlan lib module commit_id:4319684c [CFE]VXLAN LIB module install successfully ...! cfe adp capa module commit_id:4319684c fermion module commit_id:1195a7f5 hi_fermion_probe g_module=0 lsw/hi_fermion_fw_woe.bin hi_fermion_init start [LSW]hi_quk_init done [LSW]compile_ver:50010 compile_time:0 [LSW]thread_symbol: name:"core1_thread07_entry" pc:0x0 [LSW]thread_symbol: name:"core0_thread01_entry" pc:0x4 [LSW]thread_symbol: name:"core0_thread00_entry" pc:0x906 [LSW]thread_symbol: name:"core1_thread04_entry" pc:0xcc3 [LSW]thread_symbol: name:"core1_thread06_entry" pc:0xfaa [LSW]thread_symbol: name:"core0_thread02_entry" pc:0x1322 [LSW]thread_symbol: name:"core1_thread05_entry" pc:0x148e [LSW]thread_symbol: name:"core0_thread03_entry" pc:0x14a5 [LSW]hi_load_sym_table::thread_cnt:8 hi_quk_dfx_init done. hi_fermion_init done. fermion 17500000.fermion: Hisilicon fermion swver=v10,hwver=v10,ret=0x0 xoe module commit_id:1195a7f5 lsw woe module commit_id:1195a7f5 match tx_msdu_info_item_num setting. dpu init finish. ret=00000000 lsw_woe lsw_woe: Hisilicon lsw_woe driver init wifi tiangong module commit_id:1195a7f5 woe_wifi_tiangong woe_wifi_tiangong: Hisilicon woe wifi driver init SUCC woe dev module commit_id:1195a7f5 init micro msg succ woe_dev woe_dev: Hisilicon woe driver init mount file system start mount file system end permission adapt start chown: /config/conf: Read-only file system chown: /config/custom: Read-only file system permission adapt end The board info is vendor_id=upt, chip_id=tiangong1, board_id=4331168(0x4216a0) The board.xml is exist, keep old board.xml init board sysctl_conf start sysctl_conf end ln /etc/localtime rm: can't remove '/etc/localtime': No such file or directory [HI_APPM] ########### Appm Start Begin ########### appm init begin ln: /usr/httpd/web/web_log/log: Read-only file system tar: removing leading '/' from member names ln: /usr/httpd/web/webcmcc/config_file.tar.gz: No such file or directory begin ctcc_smart_prepare !!! gateway module commit_id:d671f5d6 hi_notify_init succ jffs2: Empty flash at 0x009a2a98 ends at 0x009a3000 hsan_boot (681): drop_caches: 3 [HI_APPM] [succ] init script [HI_APPM] [succ] init path [HI_APPM] [succ] init lib [HI_APPM] [succ] init app [HI_APPM] [succ] init group [HI_APPM] [succ] init db [HI_APPM] [succ] new process(749) [HI_APPM] [succ] <0> sysinfo [HI_APPM] [succ] start sysinfo [HI_APPM] [succ] new process(751) [HI_APPM] [succ] <0> syslog [HI_APPM] [succ] <1> crashlog [HI_APPM] [succ] start syslog [HI_APPM] [succ] new process(769) [HI_APPM] [succ] <0> sysstat [HI_APPM] [succ] start sysstat [HI_APPM] [succ] new process(770) [HI_APPM] [succ] <0> encrypt [HI_APPM] [succ] start encrypt [HI_APPM] [succ] new process(772) [HI_APPM] [succ] <0> board [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[1] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[2] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[3] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[4] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[5] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[6] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[7] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[8] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[9] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[11] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[12] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[13] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[14] [LED]Led init suc!!! Led data num = 2 [HI_APPM] [succ] <1> led [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[19] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 772 ret 8ffffff2, data0[19] [HI_APPM] [succ] <2> key [HI_APPM] [succ] start ext_dev [HI_APPM] [succ] new process(775) Router mode url_init cfe xtables install succ! [WAN_ERR:hi_wan_port_attacth_netdev(332)]ifname port 00000008 not in global ports [HI_APPM] [succ] <0> wan Illegal target name 'DNS_DNAT_PORTAL'. Illegal target name 'DNS_DNAT_PORTAL'. lan init succ [HI_APPM] [succ] <1> lan [HI_APPM] [succ] start wan_lan [HI_APPM] [succ] new process(1073) [HI_APPM] [succ] <0> wlan insmod hostlimit succ!! wifi_version tiangong1&2 loading hslink module commit_id:4319684c [low_power_init]low_power_init: success [HI_APPM] [succ] <1> lanhost [HI_APPM] [succ] start host [HI_APPM] [succ] new process(1138) hi_qos_init ui_nf_conntrack_max= 61000 wlan_pm_open chip_id[0] region_info->resource NULL, base 0x26000000, 2097152, WIFI_PERI region_info->resource NULL, base 0x18200000, 4096, WIFI_GLB_CTL bus_msg_init success. plat_chip_chn_init success. [wlan_pm_init]wlan_pm_init ok! enter firmware_download_function download firmware file buf len is [524288] path=/lib/firmware/hi_wifi/FIRMWARE.bin path=/lib/firmware/hi_wifi/WCPU_DDR.bin finish download firmware firmware_download success download firmware, count [1], current time [352128]us, max time [352128]us [wlan_power_on]power on, count [1], current time [358784]us, max time [358784]us plat_excp_info_msg_process DEVICE EXCP_INFO Device plat ready! chip id : 0 wlan_pm_open SUCC chip_id[0] multi_chip_loading SUCC! custom_main_init:: chip_id=[0], len=[5336] not exist or contain wrong characters or end of file: magic_num ini_find_modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini failed!!! [WIFI_MAIN]{hal_cali_file_fill:: chip_id =0!} [HI_APPM] [succ] <0> qos [HI_APPM] [succ] start qos [HI_APPM] [succ] new process(1238) random: fast init done [HI_APPM] [succ] <0> sec Thu Jan 1 08:01:00 GMT-8 1970 [HI_APPM] [succ] <1> netapp [HI_APPM] [succ] <2> emu [HI_APPM] [succ] start netapp [HI_APPM] [succ] new process(1344) [HI_APPM] [succ] <0> upgrade [HI_APPM] [succ] <1> download [HI_APPM] [succ] start netservice [HI_APPM] [succ] new process(1346) #Init cm moudle# # Load CM config file# read deny! read deny! read deny! Load Config from default file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SECUR_URL_FILTER_DBUS_LIST_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SECUR_URL_FILTER_DBUS_LIST_TAB Config_parser Succ. Load Config from factory config file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB Config_parser Succ. Load Config from preconf.xml config file ... Config_parser Succ. Load Config Default Succ. Config load Succ! ############ Start Distribute CM Config data ############ [sysuptime: 15] Distribute Early! mkdir: can't create directory '/opt/': Read-only file system fail to open the file /opt/upt/apps/info/reboot_info 2 [HI_APPM] [succ] <0> odl [HI_APPM] [succ] start cm [HI_APPM] [succ] init env [HI_APPM] [succ] init cmd [HI_APPM] [succ] init monitor [HI_APPM] ########### Appm Start End ########### parse 73 domain_name = para = router.ctc, 0xbe86fec4 [sysuptime: 16] Start init cm remote management module! device wan_4096 is already a member of a bridge; can't enslave it to bridge br0. udhcpc: started, v1.27.2 udhcpc: [62197] sending discover parse 73 domain_name = para = router.ctc, 0xbee8fec4 parse 73 domain_name = para = router.ctc, 0xbe929ec4 [May 6 2025-15:17:11], Receive Wan Connection Add Event, WanName [1_INTERNET_B_VID_]. error=0x7000000e function=__qos_wan_mixapp_add line=858 udhcpc: [63165] sending discover parse 73 domain_name = para = router.ctc, 0xbe9a8ec4 [WIFI_MAIN]wifi_init SUCC! hmac_init_np_soft_ba_addr:addr:0 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=0 amsdu_num=16 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=1 amsdu_num=16 5g the cali result to device succ {hmac_save_cali_data_to_file:: ret =35629!} hdpp_hslink_notify_init: succ excp wifi callback register chip0 iwpriv Hisilicon0 alg set_2g_dpd_power_param 016e0168 0170016b 0176016f 0161015d 01640160 016b0164 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_2g_dpd_low_power_param 014b0154 0158015b 014d0151 014e0153 01470151 01560155 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000000 01400140 01400140 01420141 0140013a 013a013a 01400138 013e013f 01400140 0140013d 0140013f 01390139 0140013b 013d013d 0140013c 01400140 01370140 01400140 013e0140 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000000 01400140 01400140 012c012c 0140012e 012d012e 0140012e 01310131 01400130 012f012f 01400129 012c0129 0140012d 012c012d 0140012b 01400140 01290140 01400140 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000001 01360136 01360136 01410140 0136013c 013f013b 0136013d 01430142 01360142 01490148 01360148 013c0140 0136013f 013f0143 01360142 01360136 013c0136 01360136 01440136 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000001 01360136 01360136 0130012d 01360131 01330132 01360133 01330133 01360133 01340134 01360132 012e0132 01360131 012c0130 0136012e 01360136 01320136 01360136 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_xo_ppm_cali_param 00004040 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_rssi_param 00000000 00000000 00000000 00000000 00000000 00000000 00000204 00000000 00080000 00000000 Hisilicon0 alg:[SUCC] tiangong1 wifi_version killall: phddns: no process killed ############igdCmWanConnectionOption125Init Start ############ lTotalNum [0]. ############WanConnectionOption125 Attribute Table Init End ############ ############igdCmWanConnectionOption16Init Start ############ lTotalNum [0]. ############WanConnectionOption16 Attribute Table Init End ############ ############igdCmWanConnectionOption17Init Start ############ lTotalNum [0]. ############WanConnectionOption17 Attribute Table Init End ############ igdCmWanConnectionIPFwdRouteInit OK. [sysuptime: 17] Distribute Main! [XML_ERR:_mib_chain_get(235)] getXMLDir(471) fail! [HI_IPC] ipc call hi_hi_netif_set_ddos_rule_call fail, pid 0 ret 90000000, data0[3175010] udhcpc: [64135] sending discover [sysuptime: 18] Distribute Medium! vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 chip id is 0cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 chip id is 1cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log INFO::[NULL:97 nlc_wksp_init]create socket succ INFO::[NULL:68 nlc_netlink_create]netlink_create INFO::[NULL:70 nlc_netlink_create]nlc_netlink_create: netlink id[25]! INFO::[NULL:78 nlc_netlink_create]netlink socket create succ INFO::[NULL:86 nlc_netlink_create]bind netlink socket succ INFO::[NULL:243 nlc_netlink_recv_pthread]enter netlink_recv_pthread hostpad_pid is 1873 pid 1873's current affinity mask: 633a60 pid 1873's new affinity mask: 633a60 random: hostapd: uninitialized urandom read (20 bytes read) killall: app_acs: no process killed INFO::[NULL:54 nlc_msg_add_app_handler]app type:8 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=38030 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] __hi_wifi_mode_set 14 INFO::[NULL:54 nlc_msg_add_app_handler]app type:3 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=46332 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK vap0 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit hostapd_cli_remove: REMOVE vap0 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069702988 ret 90000000, data0[812671350] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 0 udhcpc: no lease, failing hostapd_cli_remove: REMOVE vap8 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069702988 ret 90000000, data0[946889078] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 4 __hi_wifi_mode_set 15 del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 rootif mld0 que_pri 0 get_sch fail init qos info fail, ifname mld0 g_ssidnum_band[0]=4 g_ssidnum_band[1]=4 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK vap8 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit Sorry, rule does not exist. parse 73 domain_name = para = router.ctc, 0xbef38ec4 iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? commit_proc: flag=2 ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. lMeshParaChanged = 0 vap en is 1 [WLAN_DBG_ERR:hi_wifi_mld_vap_restart(736)]link_vap_2g->ui_vap_en=1 link_vap_5g->ui_vap_en=0 Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap1 hostapd_cli_remove: REMOVE vap1 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap2 hostapd_cli_remove: REMOVE vap2 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap3 hostapd_cli_remove: REMOVE vap3 OK Sorry, rule does not exist. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No hrtimer: interrupt took 17125 ns such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. lMeshParaChanged = 1 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 OK hostapd_cli_remove: REMOVE vap0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE hwifi_read_nv_config:find modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini tag_index:13 err!!! Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/Arandom: hostapd: uninitialized urandom read (31 bytes read) ll: nonexistent directory wpa_drandom: hostapd: uninitialized urandom read (1024 bytes read) river_nl80211_wps_status[1669] random: hostapd: uninitialized urandom read (31 bytes read) vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbeb2eec4 lMeshParaChanged = 0 vap en is 0 del br vap9 hostapd_cli_remove: REMOVE vap9 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap10 hostapd_cli_remove: REMOVE vap10 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap11 hostapd_cli_remove: REMOVE vap11 OK lMeshParaChanged = 0 vap en is 0 del br vap2 hostapd_cli_remove: REMOVE vap2 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory lMeshParaChanged = 0 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. vap en is 0 del br vap10 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory uiRepeaterEnable [1] ulRepeaterModeType[4] set g_repeater_mlo_mode to 0 hostapd_cli_remove: REMOVE vap10 OK g_ui_sta24:0 g_ui_sta58:0 g_mld_sta:0 rootif vap20 que_pri 0 get_sch fail init qos info fail, ifname vap20 rootif vap50 que_pri 0 get_sch fail init qos info fail, ifname vap50 pid 2526's current affinity mask: 5d3a60 pid 2526's new affinity mask: 5d3a60 success: IGD_CM_OPERATE_SUCCESS. [CM:SYSEVENT:error:hi_notifier_ipc_264_hi_odl(298)] #### hi_notifier_ipc_264_hi_odl 298 6 ========== pid 2552's current affinity mask: 5c3a60 pid 2552's new affinity mask: 5c3a60 killall: easymesh: no process killed bandsteering_enable1 ip6tables v1.8.2 (legacy): Couldn't load match `ipv6header':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading commit_proc: flag=1 TELNET_ENABLE: 1 TELNET_PORT: 23 killall: telnetd: no process killed sh: syntax error: unexpected "(" SSH_ENABLE: 0 SSH_USER: SSH_PASSWD: SSH_PORT: killall: dropbear: no process killed killall: crond: no process killed [sysuptime: 26] Distribute Tardy! ulIPver: 0 ulPingCnt: 4 ulBlkSize: 56 ulTimeout: 10000 ulInterval: 0 acWanIf: acHost: pc_waninterface: ifname: host: CM RepNum: 5 INFO [HI_EmAgentApiInit:431]HI_EmAgentApiInit success [XML_WRN:_mib_chain_get(243)] recordNum(0), id(699), final_idx(0), pCurr(0), pCurr->pData(0) nslookup: can't resolve '(null)' hsan login: [sysuptime: 27] Distribute Finish! vap0: INTERFACE-DISABLED Start webserver now [UNICOM API: hi_unicomapi_init] [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.wifi.1.ap.1 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.wifi.1.ap.2 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.wifi.1.ap.3 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.wifi.1.ap.4 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.wifi.1.ap.5 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.wifi.1.ap.6 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.wifi.1.ap.7 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.wifi.1.ap.8 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_load_existing_lan(349)]hi_load_existing_lan 349 fail! [UBUS:hi_load_existing_lan(364)]hi_load_existing_lan 364 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.laninfo.1 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! 1970-01-01 08:01:13.338 [debug] init_run: start appd (/bin/appd) del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap8: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 hostapd_cli_remove: REMOVE vap1 OK del br vap2 hostapd_cli_remove: REMOVE vap2 OK del br vap3 parse 73 domain_name = para = router.ctc, 0xbe99fec4 hostapd_cli_remove: REMOVE vap3 OK vap0: INTERFACE-DISABLED vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 hostapd_cli_remove: REMOVE vap11 OK parse 73 domain_name = para = router.ctc, 0xbed5eec4 vap8: INTERFACE-DISABLED vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit Invalid command : bsd_5g_load [CM:SYSEVENT:error:hi_notifier_ipc_264_hi_odl(298)] #### hi_notifier_ipc_264_hi_odl 298 8 ========== [UBUS:hi_ubus_signal_proc(138)]hi_ubus_signal_proc 138 fail 1! [UBUS:hi_ubus_signal_proc(141)]hi_ubus_signal_proc 141 fail! [UBUS:hi_ctcapd_signal_laninfo(418)]hi_ctcapd_signal_laninfo 418 fail! [UBUS:hi_ctcapd_signal_laninfo(421)]hi_ctcapd_signal_laninfo 421 fail! [UBUS:hi_ctcapd_signal_laninfo(428)]hi_ctcapd_signal_laninfo 428 fail! [UBUS:hi_ubus_signal_proc(145)]hi_ubus_signal_proc 145 fail! [UBUS:_ubus_notify_handler(47)]'ctcapd.laninfo' 'devicestatus' '{"mac":"00:e0:70:c6:73:49","active":0}' nslookup: can't resolve 'cn.pool.ntp.org' commit_proc: flag=2 nslookup: can't resolve '(null)' [CM:SYSEVENT:error:hi_notifier_ipc_264_hi_odl(298)] #### hi_notifier_ipc_264_hi_odl 298 6 ========== [UBUS:hi_ubus_signal_proc(138)]hi_ubus_signal_proc 138 fail 1! [UBUS:hi_ubus_signal_proc(141)]hi_ubus_signal_proc 141 fail! [UBUS:hi_dynamically_add_object(63)]hi_dynamically_add_object 63 fail! [UBUS:hi_dynamically_add_object(70)]hi_dynamically_add_object 70 ctcapd.laninfo.1 fail! [UBUS:hi_dynamically_add_object(91)]hi_dynamically_add_object 91 fail! [UBUS:hi_ctcapd_signal_laninfo(428)]hi_ctcapd_signal_laninfo 428 fail! [UBUS:hi_ubus_signal_proc(145)]hi_ubus_signal_proc 145 fail! [UBUS:_ubus_notify_handler(47)]'ctcapd.laninfo' 'newdevice' '{"mac":"00:e0:70:c6:73:49","vmac":"","connecttype":0,"port":2,"hostname":""}' [UBUS:_add_laninfo_obj(441)]hi_dynamically_add_object error commit_proc: flag=1 nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:4. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:1. INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:6. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:5. nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' detect internet dns failed, waiting... nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' hsan login: nslookup: can't resolve '(null)' hsan login: root login: can't change directory to '/root' -ash: smart_env: not found / # ubuscnslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' -ash: ubu: not found / # / # / # ubus list apmaintain apu01 ctcapd ctcapd.appd ctcapd.devinfo ctcapd.diagnostics ctcapd.filter.dns ctcapd.initd ctcapd.iptv ctcapd.laninfo ctcapd.laninfo.1 ctcapd.ledswitch ctcapd.neighbourinfo ctcapd.qos ctcapd.qos.classification ctcapd.usb.device ctcapd.usb.filesystem ctcapd.usb.samba ctcapd.waninfo ctcapd.wifi ctcapd.wifi.1 ctcapd.wifi.1.ap ctcapd.wifi.1.ap.1 ctcapd.wifi.1.ap.2 ctcapd.wifi.1.ap.3 ctcapd.wifi.1.ap.4 ctcapd.wifi.1.ap.5 ctcapd.wifi.1.ap.6 ctcapd.wifi.1.ap.7 ctcapd.wifi.1.ap.8 ctcapd.wifi.2 ctcapd.wifi.blacklist ctcapd.wifi.mesh ctcapd.wifi.roaming ctcapd.wifi.timer ctcapd.wifi.timerext ctcapd.wifi.vsie ctcapd.wifi.vsie.beacontx ctcapd.wifi.vsie.proberesp ctcapd.wifi.vsie.proberx ctcapd.wifi.whitelist elinkclt qlink / # nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' random: crng init done random: 6 urandom warning(s) missed due to ratelimiting nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' g_ssidnum_band[0]=4 g_ssidnum_band[1]=4 Invalid command : bsd_5g_load nslookup: can't resolve 'cn.pool.ntp.org' name[password], ERR code[8] name[admin_password], ERR code[8] oldModeType [4] --> ulModeType [4]. [UBUS:hi_ubus_signal_proc(138)]hi_ubus_signal_proc 138 fail 9! [UBUS:hi_ubus_signal_proc(141)]hi_ubus_signal_proc 141 fail! lMeshParaChanged = 0 [UBUS:hi_ubus_signal_proc(145)]hi_ubus_signal_proc 145 fail! vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 lMeshParaChanged = 0 vap0: INTERFACE-DISABLED vap8: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK nslookup: can't resolve '(null)' hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[UBUS:hi_ubus_signal_proc(138)]hi_ubus_signal_proc 138 fail 9[SUCC]atf_mode set succ !!! mode = [2] ! [UBUS:hi_ubus_signal_proc(141)]hi_ubus_signal_proc 141 fail! [UBUS:hi_ubus_signal_proc(145)]hi_ubus_signal_proc 145 fail! vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbebf8ec4 vap0: INTERFACE-DISABLED vap8: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbebe8ec4 Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument commit_proc: flag=6 nslookup: can't resolve 'asia.pool.ntp.org' Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' open version.txt error! size of linux : 54525952 >>>>>>>>>>>>>>upgrade flagcount = 0 start image write file! em_flag = 0 ui_len = 36175872 ac_filename = /tmp/web_post_file ! upgrade starting ... ac_filename=/tmp/web_post_file, len=36175872, offset=166, flag=0 --pst_header->auc_head_crc b6e36cd4 ui_hear_crc a2975652 ui_crc a2975652!!!--- --upgrade header crc check ok!!!--- --ui_package_length = 36015764 pui_len = 36015764!!!--- --board chip is tiangong1, firmware chip is tiangong1--- --gui_one_track 0!!!--- --esbc len 0 offset 0--- --boot len 0 offset 0--- --kernel len 5474520 offset 1630--- --rootfs len 30539776 offset 5476150--- --java len 0 offset 0--- --default len 0 offset 0--- the web pkg doesn't contain ctfwk patition ! --Start packet crc check!!!--- nslookup: can't resolve 'cn.pool.ntp.org' --ui_package_crc = 0x85a20459 ui_package_checksum = 0x85a20459--- --packet crc check ok!!--- bootfile = ctc --__upgrade_boot_write chip_id = tiangong1--- __upgrade_file_write:938 em_flag 0 --ul_offset = 1630!!! badoff=0 len=5474520--- nslookup: can't resolve '(null)' --ul_offset = 5476150!!! badoff=0 len=30539776--- nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' upgrade flag:0 bootreg:10 cmd_version:HiHANLinuxV100R003C01SPC010 sw_version:V2.1.1 sed: /config/work/upgrade_state.txt: No such file or directory gui_upgrade_finish = 1 --upgrade succ!--- sendUbusMsg failed. mkdir: can't create directory '/opt/': Read-only file system fail to open the file /opt/upt/apps/info/reboot_info 2 [HI_IPC] ipc call hi_IPC_igdCmRebootInfo_call fail, pid 1346 ret ffffffff, data0[536870925] killall: udhcpc: no process killed killall: pppd: no process killed nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' killall: cms: no process killed reboot: Restarting system HI, BSBC! P:3101 P:1013 P:1018 P:3202 P:3700 P:3203 P:3204 P:1021 hi-esbc start boot_info.value a0000..... boot mode 2...... match board UPTV1D0_BE3600, board_id_val 4216a0 sec init spi hw init succ ??oot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17510438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81000 size 0x100 to addr 0x17511438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81100 size 0x1bf0 to addr 0x17511538 normal boot...... no secure boot, dont check sign...... no secure boot, dont check code image..... start ddrinit from addr 17511538 ddrinit finish This boot is main region 0 area...... nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read oob: offset 0xa0000 nand read oob: offset 0xc0000 nand read oob: offset 0xe0000 nand read: offset 0x83df0 size 0x783d8 to addr 0x80102000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont check code image..... check nvcnt...... check version start...... There is no version in efuse dice not support...... subkey_id = 0x00 esbc_mask = 0x01 bl_nvcnt = 0x01 start to uboot...... U-Boot 2022.07 (May 06 2025 - 15:17:07 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 140 devices, 18 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xe5, Chip ID: 0x71 Unknown DS35Q1GA Unknown DS35Q1GA 128 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 64 128 MiB Loading Environment from NAND... Scanning device for bad blocks OK In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 bootflag verify succ Reset Info: Linux reboot cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ hsan_pie pie: pie probe succ eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 bootreg offset: c0c boot regval: 10 boot from kernela and update reg to 11 hi_secboot_main sec init sec init succ drivers init succ boot_info.value a0000..... Size not on a page boundary (0x800), rounding to 0x800 Size not on a page boundary (0x800), rounding to 0x538000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont code check hash..... check nvcnt...... check version start...... There is no version in efuse dice not support...... flash boot succ...... uboot secboot exit name:56190527, serial_number:edd5da7e Image Name: Linux-5.10.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5352624 Bytes = 5.1 MiB Load Address: 80208000 Entry Point: 80208000 By default, the matching mode of hsan is used Match dtbo succ, chip = hsan,tiangong1, boardid = 4331168, vendorid = upt alias console=/uart1@10119000 serialnr->high=0x11, serialnr->low=0x10119000, atag_addr=0x80201000 SPI Nand Spec : Chip[134217728B] Block[131072B] Page[2048B] OOB[64B] ECC[4bit] Chip Name : DS35Q1GA ## Transferring control to Linux ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 5.10.0 (yliu@yliu) (arm-mix510-linux-gcc (musl-1.2.3 linux-5.10 V12CS61.003.020 2024-01-16 12:00:00) 10.3.0, GNU ld (GNU Binutils) 2.38) #2 SMP Thu Jul 10 14:42:19 CST 2025 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: hsan-tiangong1 OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 earlycon: pl11 at MMIO 0x10119000 (options '') printk: bootconsole [pl11] enabled Memory policy: Data cache writealloc OF: reserved mem: OVERLAP DETECTED! fermion (0x80000000--0x80200000) overlaps with mem@0x80000000 (0x80000000--0x80200000) Zone ranges: Normal [mem 0x0000000080200000-0x000000008fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000008b3fffff] node 0: [mem 0x000000008d800000-0x000000008d8fffff] node 0: [mem 0x000000008e400000-0x000000008fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] mdesc->l2c_aux_val 430001 mdesc->l2c_aux_mask ffb0fffe percpu: Embedded 20 pages/cpu s49932 r8192 d23796 u81920 Built 1 zonelists, mobility grouping on. Total pages: 52420 Kernel command line: noinitrd console=ttyAMA0,115200 earlycon cma=0 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) allocated 264192 bytes of page_ext mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 194408K/211968K available (8404K kernel code, 1430K rwdata, 2712K rodata, 1372K init, 532K bss, 17560K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 rcu: Hierarchical RCU implementation. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 192, preallocated irqs: 192 L2C: platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform tries to modify or specify cache size L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310: enabling full line of zeros but not enabled in Cortex-A9 L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 16 ways, 256 kB L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x46430001 random: get_random_bytes called from start_kernel+0x384/0x550 with crng_init=0 sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255550ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e6a221d, max_idle_ns: 440795213442 ns Switching to timer-based delay loop, resolution 3ns clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 39817925974 ns Ignoring duplicate/late registration of read_current_timer delay Calibrating delay loop (skipped), value calculated using timer frequency.. 575.00 BogoMIPS (lpj=2875000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) CPU: Testing write buffer coherency: ok CPU0: Spectre v2: using BPIALL workaround CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80208220 - 0x8020825c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU1: Spectre v2: using BPIALL workaround smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated (1150.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. Serial: AMBA PL011 UART driver OF: /gpio@10109000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@1010a000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@0x26006000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag 10119000.uart1: ttyAMA0 at MMIO 0x10119000 (irq = 203, base_baud = 0) is a SBSA printk: console [ttyAMA0] enabled printk: console [ttyAMA0] enabled printk: bootconsole [pl11] disabled printk: bootconsole [pl11] disabled 10118000.uart0: ttyAMA1 at MMIO 0x10118000 (irq = 204, base_baud = 12000000) is a PL011 rev2 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 8 NET: Registered protocol family 20 clocksource: Switched to clocksource arm_global_timer VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered protocol family 44 Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=16 bucket_order=2 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs: driver 2.1.32 [Flags: R/W DEBUG]. jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. fuse: init (API version 7.32) Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) loop: module loaded libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage GACT probability NOT on Mirror/redirect action on u32 classifier input device check on Actions configured xt_time: kernel timezone is -0000 ipip: IPv4 and MPLS over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 l2tp_ip: L2TP IP encapsulation support (L2TPv3) l2tp_netlink: L2TP netlink interface l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Warning: unable to open an initial console. cfg80211: failed to load regulatory.db Freeing unused kernel memory: 1372K Kernel memory protection not selected by kernel config. Run /init as init process hi_crg: loading out-of-tree module taints kernel. [DFX] HSAN mlog_print function is unavailable... Basic driver of Linux Kernel install successfully ...! hi-reset reset0: resister reset device hi-reset reset@1: resister reset device hi-reset reset@2: resister reset device hi-reset reset@3: resister reset device hi-reset reset@4: resister reset device hi-reset reset@5: resister reset device hi-reset reset@6: resister reset device hi-reset reset@7: resister reset device hi-reset reset@8: resister reset device hi-reset reset@9: resister reset device 102a0000.fmc_acp : ON 10103000.dmac0_acp : ON 12000000.sec_acp : ON 12080000.pie_acp : ON watchdog: watchdog0 running and kernel based pre-userspace handler disabled HSAN FMC Controller Device Driver, Version 100 15 fixed-partitions partitions found on MTD device 102a0000.fmc Creating 15 MTD partitions on "102a0000.fmc": 0x000000000000-0x000000080000 : "esbc0_a" 0x000000080000-0x000000180000 : "uboota" 0x000000180000-0x000000280000 : "ubootb" 0x000000280000-0x000000300000 : "enva" 0x000000300000-0x000000380000 : "envb" 0x000000380000-0x000000580000 : "fac" 0x000000580000-0x000000780000 : "cfga" 0x000000780000-0x000000980000 : "cfgb" 0x000000980000-0x000000d80000 : "log" 0x000000d80000-0x000000e00000 : "pstore" 0x000000e00000-0x000001500000 : "kernela" 0x000001500000-0x000001c00000 : "kernelb" 0x000001c00000-0x000004900000 : "rootfsa" 0x000004900000-0x000007600000 : "rootfsb" 0x000007600000-0x000008000000 : "app" show boot_reg: 11 ubi0: attaching mtd12 ubi0: scanning is finished ubi0 error: ubi_read_volume_table [ubi]: the layout volume was not found ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd12, error -22 UBI error: cannot attach mtd12 UBI error: cannot initialize UBI, error -22 UBIFS error (pid 306): cannot initialize compressor lzo, error -2 gpio-dwapb 26006000.gpio: no IRQ for port0 hi_efuse_driver efuse:ns: match succ hi_efuse_driver efuse:extend_dieid: match succ hi_efuse_driver efuse:ate_trim: match succ hi_efuse_driver efuse:wifi: match succ hi_efuse_driver efuse:sec_boot_info: match succ hi_efuse_driver efuse:sec_logic_key: match succ hi_efuse_driver efuse:online: match succ hi_efuse_driver efuse:rompatch: match succ hi_efuse_driver efuse:trim_ext: match succ hi_efuse_driver efuse:userinfo: match succ cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1149999 KHz, changing to: 1150000 KHz clocksource: Switched to clocksource timer sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255551ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e664f33, max_idle_ns: 440795207478 ns set hsan,acp-sec acp attr succ cryp probe succ hi_upsphy upsphy@1: upsphy_probe done pie module commit_id:1195a7f5 clipper module commit_id:1195a7f5 pie 12080000.pie: open dma-coherent 3000000 set hsan,acp-pie acp attr succ pie 12080000.pie: Hisilicon pie swver=v210,hwver=v310 lsw module commit_id:1195a7f5 dp module commit_id:1195a7f5 [LSW]Hisilicon lsw dp swver=v300,hwver=v310,ret=0x0 pfe module commit_id:1195a7f5 [LSW]Hisilicon lsw pfe swver=v200,hwver=v310,ret=0x0 mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed phy module commit_id:1195a7f5 [GEPHY]Genius Phy hwVer:0x20669a22 fwVer:0x6e07 [GEPHY]Genius Phy adp version:v102 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 combophy module commit_id:1195a7f5 hi_upsphy set mode :15 combophy 11920000.serdes: Hisilicon combophy_v300 driver init pcs module commit_id:1195a7f5 pcs 144c0000.pcs: Hisilicon pcs driver init pcs module commit_id:1195a7f5 pcs 514c0000.pcs: Hisilicon pcs driver init misc module commit_id:1195a7f5 mii_misc 11920084.mii_misc: Hisilicon mii misc driver init misc module commit_id:1195a7f5 mii_misc 14000178.mii_misc_ge3_2p5: Hisilicon mii misc driver init serdes module commit_id:1195a7f5 cfe pub module commit_id:4319684c [CFE]CFE PUB module install successfully ...! cfe lrn module commit_id:4319684c [CFE]CFE LRN module install successfully ...! l3 lib module commit_id:4319684c [CFE]L3 LIB module install successfully ...! l4 lib module commit_id:4319684c [CFE]L4 LIB module install successfully ...! l2tp lib module commit_id:4319684c [CFE]L2TP LIB module install successfully ...! pptp lib module commit_id:4319684c [CFE]PPTP LIB module install successfully ...! dslite lib module commit_id:4319684c [CFE]DSLITE LIB module install successfully ...! mc lib module commit_id:4319684c [CFE]MC LIB module install successfully ...! mc list module commit_id:4319684c [CFE]MC LIST module install successfully ...! vxlan lib module commit_id:4319684c [CFE]VXLAN LIB module install successfully ...! cfe adp capa module commit_id:4319684c fermion module commit_id:1195a7f5 hi_fermion_probe g_module=0 lsw/hi_fermion_fw_woe.bin hi_fermion_init start [LSW]hi_quk_init done [LSW]compile_ver:50010 compile_time:0 [LSW]thread_symbol: name:"core1_thread07_entry" pc:0x0 [LSW]thread_symbol: name:"core0_thread01_entry" pc:0x4 [LSW]thread_symbol: name:"core0_thread00_entry" pc:0x906 [LSW]thread_symbol: name:"core1_thread04_entry" pc:0xcc3 [LSW]thread_symbol: name:"core1_thread06_entry" pc:0xfaa [LSW]thread_symbol: name:"core0_thread02_entry" pc:0x1322 [LSW]thread_symbol: name:"core1_thread05_entry" pc:0x148e [LSW]thread_symbol: name:"core0_thread03_entry" pc:0x14a5 [LSW]hi_load_sym_table::thread_cnt:8 hi_quk_dfx_init done. hi_fermion_init done. fermion 17500000.fermion: Hisilicon fermion swver=v10,hwver=v10,ret=0x0 xoe module commit_id:1195a7f5 lsw woe module commit_id:1195a7f5 match tx_msdu_info_item_num setting. dpu init finish. ret=00000000 lsw_woe lsw_woe: Hisilicon lsw_woe driver init wifi tiangong module commit_id:1195a7f5 woe_wifi_tiangong woe_wifi_tiangong: Hisilicon woe wifi driver init SUCC woe dev module commit_id:1195a7f5 init micro msg succ woe_dev woe_dev: Hisilicon woe driver init mount file system start mount file system end permission adapt start permission adapt end The board info is vendor_id=upt, chip_id=tiangong1, board_id=4331168(0x4216a0) The board.xml is exist, keep old board.xml init board sysctl_conf start sysctl_conf end ln /etc/localtime rm: can't remove '/etc/localtime': No such file or directory [HI_APPM] ########### Appm Start Begin ########### appm init begin tar: removing leading '/' from member names ln: /usr/httpd/web/webcmcc/config_file.tar.gz: No such file or directory begin ctcc_smart_prepare !!! jffs2: Empty flash at 0x009a2a98 ends at 0x009a3000 gateway module commit_id:d671f5d6 hi_notify_init succ hsan_boot (681): drop_caches: 3 [HI_APPM] [succ] init script [HI_APPM] [succ] init path [HI_APPM] [succ] init lib [HI_APPM] [succ] init app [HI_APPM] [succ] init group [HI_APPM] [succ] init db [HI_APPM] [succ] new process(751) [HI_APPM] [succ] <0> sysinfo [HI_APPM] [succ] start sysinfo [HI_APPM] [succ] new process(753) [HI_APPM] [succ] <0> syslog [HI_APPM] [succ] <1> crashlog [HI_APPM] [succ] start syslog [HI_APPM] [succ] new process(771) [HI_APPM] [succ] <0> sysstat [HI_APPM] [succ] start sysstat [HI_APPM] [succ] new process(772) [HI_APPM] [succ] <0> encrypt [HI_APPM] [succ] start encrypt [HI_APPM] [succ] new process(774) [HI_APPM] [succ] <0> board [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[1] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[2] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[3] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[4] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[5] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[6] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[7] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[8] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[9] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[11] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[12] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[13] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[14] [LED]Led init suc!!! Led data num = 2 [HI_APPM] [succ] <1> led [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[19] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 774 ret 8ffffff2, data0[19] [HI_APPM] [succ] <2> key [HI_APPM] [succ] start ext_dev [HI_APPM] [succ] new process(777) Router mode url_init cfe xtables install succ! [WAN_ERR:hi_wan_port_attacth_netdev(332)]ifname port 00000008 not in global ports [HI_APPM] [succ] <0> wan Illegal target name 'DNS_DNAT_PORTAL'. Illegal target name 'DNS_DNAT_PORTAL'. lan init succ [HI_APPM] [succ] <1> lan [HI_APPM] [succ] start wan_lan [HI_APPM] [succ] new process(1076) [HI_APPM] [succ] <0> wlan insmod hostlimit succ!! loading hslink module commit_id:4319684c [low_power_init]low_power_init: success [HI_APPM] [succ] <1> lanhost [HI_APPM] [succ] start host [HI_APPM] [succ] new process(1141) hi_qos_init ui_nf_conntrack_max= 61000 wlan_pm_open chip_id[0] region_info->resource NULL, base 0x26000000, 2097152, WIFI_PERI region_info->resource NULL, base 0x18200000, 4096, WIFI_GLB_CTL bus_msg_init success. plat_chip_chn_init success. [wlan_pm_init]wlan_pm_init ok! enter firmware_download_function download firmware file buf len is [524288] path=/lib/firmware/hi_wifi/FIRMWARE.bin path=/lib/firmware/hi_wifi/WCPU_DDR.bin finish download firmware firmware_download success download firmware, count [1], current time [183685]us, max time [183685]us [wlan_power_on]power on, count [1], current time [190338]us, max time [190338]us [HI_APPM] [succ] <0> qos [HI_APPM] [succ] start qos [HI_APPM] [succ] new process(1237) plat_excp_info_msg_process DEVICE EXCP_INFO Device plat ready! chip id : 0 wlan_pm_open SUCC chip_id[0] multi_chip_loading SUCC! custom_main_init:: chip_id=[0], len=[5336] not exist or contain wrong characters or end of file: magic_num ini_find_modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini failed!!! [WIFI_MAIN]{hal_cali_file_fill:: chip_id =0!} [HI_APPM] [succ] <0> sec Thu Jan 1 08:05:13 GMT-8 1970 random: fast init done [HI_APPM] [succ] <1> netapp [HI_APPM] [succ] <2> emu [HI_APPM] [succ] start netapp [HI_APPM] [succ] new process(1347) [HI_APPM] [succ] <0> upgrade [HI_APPM] [succ] <1> download [HI_APPM] [succ] start netservice [HI_APPM] [succ] new process(1349) #Init cm moudle# # Load CM config file# Config_parser Succ. Load Config from config file Succ. Config load Succ! ############ Start Distribute CM Config data ############ [sysuptime: 16] Distribute Early! [HI_APPM] [succ] <0> odl [HI_APPM] [succ] start cm [HI_APPM] [succ] init env [HI_APPM] [succ] init cmd [HI_APPM] [succ] init monitor [HI_APPM] ########### Appm Start End ########### parse 73 domain_name = para = router.ctc, 0xbed00ec4 [sysuptime: 16] Start init cm remote management module! device wan_4096 is already a member of a bridge; can't enslave it to bridge br0. udhcpc: started, v1.27.2 udhcpc: [314615] sending discover parse 73 domain_name = para = router.ctc, 0xbea09ec4 parse 73 domain_name = para = router.ctc, 0xbef5eec4 [Jul 10 2025-14:41:38], Receive Wan Connection Add Event, WanName [1_INTERNET_B_VID_]. error=0x7000000e function=__qos_wan_mixapp_add line=858 udhcpc: [315595] sending discover parse 73 domain_name = para = router.ctc, 0xbef70ec4 killall: phddns: no process killed ############igdCmWanConnectionOption125Init Start ############ lTotalNum [0]. ############WanConnectionOption125 Attribute Table Init End ############ ############igdCmWanConnectionOption16Init Start ############ lTotalNum [0]. ############WanConnectionOption16 Attribute Table Init End ############ ############igdCmWanConnectionOption17Init Start ############ lTotalNum [0]. ############WanConnectionOption17 Attribute Table Init End ############ igdCmWanConnectionIPFwdRouteInit OK. [sysuptime: 18] Distribute Main! [XML_ERR:_mib_chain_get(235)] getXMLDir(471) fail! [WIFI_MAIN]wifi_init SUCC! hmac_init_np_soft_ba_addr:addr:0 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=0 amsdu_num=16 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=1 amsdu_num=16 5g the cali result to device succ {hmac_save_cali_data_to_file:: ret =35629!} hdpp_hslink_notify_init: succ excp wifi callback register chip0 iwpriv Hisilicon0 alg set_2g_dpd_power_param 016e0168 0170016b 0176016f 0161015d 01640160 016b0164 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_2g_dpd_low_power_param 014b0154 0158015b 014d0151 014e0153 01470151 01560155 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000000 01400140 01400140 01420141 0140013a 013a013a 01400138 013e013f 01400140 0140013d 0140013f 01390139 0140013b 013d013d 0140013c 01400140 01370140 01400140 013e0140 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000000 01400140 01400140 012c012c 0140012e 012d012e 0140012e 01310131 01400130 012f012f 01400129 012c0129 0140012d 012c012d 0140012b 01400140 01290140 01400140 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000001 01360136 01360136 01410140 0136013c 013f013b 0136013d 01430142 01360142 01490148 01360148 013c0140 0136013f 013f0143 01360142 01360136 013c0136 01360136 01440136 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000001 01360136 01360136 0130012d 01360131 01330132 01360133 01330133 01360133 01340134 01360132 012e0132 01360131 012c0130 0136012e 01360136 01320136 01360136 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_xo_ppm_cali_param 00004040 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_rssi_param 00000000 00000000 00000000 00000000 00000000 00000000 00000204 00000000 00080000 00000000 Hisilicon0 alg:[SUCC] tiangong1 wifi_version [HI_IPC] ipc call hi_hi_netif_set_ddos_rule_call fail, pid 0 ret 90000000, data0[3175010] udhcpc: [316555] sending discover [sysuptime: 19] Distribute Medium! vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 chip id is 0cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 chip id is 1cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log INFO::[NULL:97 nlc_wksp_init]create socket succ INFO::[NULL:68 nlc_netlink_create]netlink_create INFO::[NULL:70 nlc_netlink_create]nlc_netlink_create: netlink id[25]! INFO::[NULL:78 nlc_netlink_create]netlink socket create succ INFO::[NULL:86 nlc_netlink_create]bind netlink socket succ INFO::[NULL:243 nlc_netlink_recv_pthread]enter netlink_recv_pthread hostpad_pid is 1876 pid 1876's current affinity mask: 673a60 pid 1876's new affinity mask: 673a60 random: hostapd: uninitialized urandom read (20 bytes read) killall: app_acs: no process killed INFO::[NULL:54 nlc_msg_add_app_handler]app type:8 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=34012 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] __hi_wifi_mode_set 14 INFO::[NULL:54 nlc_msg_add_app_handler]app type:3 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=44469 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK vap0 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit hostapd_cli_remove: REMOVE vap0 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069473612 ret 90000000, data0[812671350] udhcpc: no lease, failing commit_proc: flag=2 [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 0 hostapd_cli_remove: REMOVE vap8 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069473612 ret 90000000, data0[946889078] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 4 __hi_wifi_mode_set 15 del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8rootif mld0 que_pri 0 get_sch fail init qos info fail, ifname mld0 hostapd_cli_remove: REMOVE vap8 OK g_ssidnum_band[0]=4 g_ssidnum_band[1]=4 del br vap8 hostapd_cli_remove: REMOVE vap8 OK vap8 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit Sorry, rule does not exist. parse 73 domain_name = para = router.ctc, 0xbef91ec4 iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? lMeshParaChanged = 0 vap en is 1 [WLAN_DBG_ERR:hi_wifi_mld_vap_restart(736)]link_vap_2g->ui_vap_en=1 link_vap_5g->ui_vap_en=0 Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap1 hostapd_cli_remove: REMOVE vap1 OK lMeshParaChanged = 0 vap en is 0 del br vap2 hostapd_cli_remove: REMOVE vap2 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap3 hostapd_cli_remove: REMOVE vap3 OK Sorry, rule does not exist. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. lMeshParaChanged = 0 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 OK hostapd_cli_remove: REMOVE vap0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE hwifi_read_nv_config:find modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini tag_index:13 err!!! Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] random: hostapd: uninitialized urandom read (31 bytes read) random: hostapd: uninitialized urandom read (1024 bytes read) random: hostapd: uninitialized urandom read (31 bytes read) vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbecc1ec4 lMeshParaChanged = 0 vap en is 0 del br vap9 hostapd_cli_remove: REMOVE vap9 OK lMeshParaChanged = 0 vap en is 0 del br vap10 hostapd_cli_remove: REMOVE vap10 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap11 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap11 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directrootif vap20 que_pri 0 get_sch fail ory sh: can't create /proc/wlaninit qos info fail, ifname vap20 _share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory uiRepeaterEnable [1] ulRepeaterModeType[4] set g_repeater_mlo_mode to 0 g_ui_sta24:0 g_ui_sta58:0 g_mld_sta:0 rootif vap50 que_pri 0 get_sch fail init qos info fail, ifname vap50 pid 2490's current affinity mask: 683a60 pid 2490's new affinity mask: 683a60 success: IGD_CM_OPERATE_SUCCESS. pid 2519's current affinity mask: 5e3a60 pid 2519's new affinity mask: 5e3a60 killall: easymesh: no process killed bandsteering_enable1 ip6tables v1.8.2 (legacy): Couldn't load match `ipv6header':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. commit_proc: flag=1 nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading TELNET_ENABLE: 1 TELNET_PORT: 23 killall: telnetd: no process killed sh: syntax error: unexpected "(" SSH_ENABLE: 0 SSH_USER: SSH_PASSWD: SSH_PORT: killall: dropbear: no process killed killall: crond: no process killed [sysuptime: 26] Distribute Tardy! ulIPver: 0 ulPingCnt: 4 ulBlkSize: 56 ulTimeout: 10000 ulInterval: 0 acWanIf: acHost: pc_waninterface: ifname: host: CM RepNum: 5 INFO [HI_EmAgentApiInit:431]HI_EmAgentApiInit success nslookup: can't resolve '(null)' vap0: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap8: INTERFACE-DISABLED [sysuptime: 27] Distribute Finish! cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 1970-01-01 08:05:25.296 [debug] init_run: start appd (/bin/appd) nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 hsan login: [UBUS:hi_load_existing_lan(393)]hi_load_existing_lan 393 fail! [UBUS:hi_load_existing_dns(267)]hi_load_existing_dns 267 fail! [UBUS:hi_load_existing_url(373)]hi_load_existing_url 373 fail! OK Start webserver now hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 hostapd_cli_remove: REMOVE vap1 OK del br vap2 hostapd_cli_remove: REMOVE vap2 OK del br vap3 parse 73 domain_name = para = router.ctc, 0xbeb70ec4 hostapd_cli_remove: REMOVE vap3 OK vap0: INTERFACE-DISABLED vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 hostapd_cli_remove: REMOVE vap11 OK parse 73 domain_name = para = router.ctc, 0xbe963ec4 vap8: INTERFACE-DISABLED vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit Invalid command : bsd_5g_load [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 1! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! [UBUS:_ubus_notify_handler(49)]'ctcapd.laninfo' 'devicestatus' '{"mac":"00:e0:70:c6:73:49","active":0}' nslookup: can't resolve 'cn.pool.ntp.org' [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 1! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! [UBUS:_ubus_notify_handler(49)]'ctcapd.laninfo' 'newdevice' '{"mac":"00:e0:70:c6:73:49","vmac":"","connecttype":0,"port":2,"hostname":""}' [UBUS:_add_laninfo_obj(481)]hi_dynamically_add_object error nslookup: can't resolve '(null)' commit_proc: flag=3 nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:4. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:1. INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:6. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:5. nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' detect internet dns failed, waiting... nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' hrtimer: interrupt took 15916 ns nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' hsan login: root login: can't change directory to '/root' -ash: smart_env: not found / # / # / # / # cnslookup: can't resolve 'cn.pool.ntp.org' at nslookup: can't resolve '(null)' / # cat /usr/lnslookup: can't resolve 'cn.pool.ntp.org' / # cat /usr/local/nslookup: can't resolve '(null)' / # cat /usr/local/factory/board.xml / # / # / # / # nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' / # / # / # nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' hi_cfm set board.lan_ports eth0,eth1,eth2,,vap0,vap1,vap2,vap3,vap4,vap5,vap 6,vap7 vap8,vap9,vap10,vap11,vap12,vap13,vap14,vap15 bad parameters! try: hi_cfm help / # / # / # cat /usr/local/factory/board.xml / # nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' ########### starting do completely restore, please wait for serveral seconds ########### bad parameters! cfmConfig 808 Load Config from default file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB Config_parser Succ. Load Config from factory config file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB Config_parser Succ. Load Config from preconf.xml config file ... Config_parser Succ. Load Config Default Succ. rm: can't remove '/sys/fs/pstore': Resource busy bad parameters! bad parameters! [CM:complete_restore(1609)]Restore ctc framework. sh: dbus-send: not found ########### completely restore success ########### sendUbusMsg failed. killall: udhcpc: no process killed killall: pppd: no process killed nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' killall: cms: no process killed reboot: Restarting system HI, BSBC! P:3101 P:1013 P:1018 P:3202 P:3700 P:3203 P:3204 P:1021 hi-esbc start boot_info.value a0000..... boot mode 2...... match board UPTV1D0_BE3600, board_id_val 4216a0 sec init spi hw init succ ??oot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17510438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81000 size 0x100 to addr 0x17511438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81100 size 0x1bf0 to addr 0x17511538 normal boot...... no secure boot, dont check sign...... no secure boot, dont check code image..... start ddrinit from addr 17511538 ddrinit finish This boot is main region 0 area...... nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read oob: offset 0xa0000 nand read oob: offset 0xc0000 nand read oob: offset 0xe0000 nand read: offset 0x83df0 size 0x783d8 to addr 0x80102000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont check code image..... check nvcnt...... check version start...... There is no version in efuse dice not support...... subkey_id = 0x00 esbc_mask = 0x01 bl_nvcnt = 0x01 start to uboot...... U-Boot 2022.07 (May 06 2025 - 15:17:07 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 140 devices, 18 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xe5, Chip ID: 0x71 Unknown DS35Q1GA Unknown DS35Q1GA 128 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 64 128 MiB Loading Environment from NAND... Scanning device for bad blocks OK In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 bootflag verify succ Reset Info: Linux reboot cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ hsan_pie pie: pie probe succ eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 bootreg offset: c0c boot regval: 10 boot from kernela and update reg to 11 hi_secboot_main sec init sec init succ drivers init succ boot_info.value a0000..... Size not on a page boundary (0x800), rounding to 0x800 Size not on a page boundary (0x800), rounding to 0x538000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont code check hash..... check nvcnt...... check version start...... There is no version in efuse dice not support...... flash boot succ...... uboot secboot exit name:56190527, serial_number:edd5da7e Image Name: Linux-5.10.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5352624 Bytes = 5.1 MiB Load Address: 80208000 Entry Point: 80208000 By default, the matching mode of hsan is used Match dtbo succ, chip = hsan,tiangong1, boardid = 4331168, vendorid = upt alias console=/uart1@10119000 serialnr->high=0x11, serialnr->low=0x10119000, atag_addr=0x80201000 SPI Nand Spec : Chip[134217728B] Block[131072B] Page[2048B] OOB[64B] ECC[4bit] Chip Name : DS35Q1GA ## Transferring control to Linux ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 5.10.0 (yliu@yliu) (arm-mix510-linux-gcc (musl-1.2.3 linux-5.10 V12CS61.003.020 2024-01-16 12:00:00) 10.3.0, GNU ld (GNU Binutils) 2.38) #2 SMP Thu Jul 10 14:42:19 CST 2025 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: hsan-tiangong1 OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 earlycon: pl11 at MMIO 0x10119000 (options '') printk: bootconsole [pl11] enabled Memory policy: Data cache writealloc OF: reserved mem: OVERLAP DETECTED! fermion (0x80000000--0x80200000) overlaps with mem@0x80000000 (0x80000000--0x80200000) Zone ranges: Normal [mem 0x0000000080200000-0x000000008fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000008b3fffff] node 0: [mem 0x000000008d800000-0x000000008d8fffff] node 0: [mem 0x000000008e400000-0x000000008fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] mdesc->l2c_aux_val 430001 mdesc->l2c_aux_mask ffb0fffe percpu: Embedded 20 pages/cpu s49932 r8192 d23796 u81920 Built 1 zonelists, mobility grouping on. Total pages: 52420 Kernel command line: noinitrd console=ttyAMA0,115200 earlycon cma=0 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) allocated 264192 bytes of page_ext mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 194408K/211968K available (8404K kernel code, 1430K rwdata, 2712K rodata, 1372K init, 532K bss, 17560K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 rcu: Hierarchical RCU implementation. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 192, preallocated irqs: 192 L2C: platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform tries to modify or specify cache size L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310: enabling full line of zeros but not enabled in Cortex-A9 L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 16 ways, 256 kB L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x46430001 random: get_random_bytes called from start_kernel+0x384/0x550 with crng_init=0 sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255550ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e6a221d, max_idle_ns: 440795213442 ns Switching to timer-based delay loop, resolution 3ns clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 39817925974 ns Ignoring duplicate/late registration of read_current_timer delay Calibrating delay loop (skipped), value calculated using timer frequency.. 575.00 BogoMIPS (lpj=2875000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) CPU: Testing write buffer coherency: ok CPU0: Spectre v2: using BPIALL workaround CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80208220 - 0x8020825c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU1: Spectre v2: using BPIALL workaround smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated (1150.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. Serial: AMBA PL011 UART driver OF: /gpio@10109000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@1010a000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@0x26006000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag 10119000.uart1: ttyAMA0 at MMIO 0x10119000 (irq = 203, base_baud = 0) is a SBSA printk: console [ttyAMA0] enabled printk: console [ttyAMA0] enabled printk: bootconsole [pl11] disabled printk: bootconsole [pl11] disabled 10118000.uart0: ttyAMA1 at MMIO 0x10118000 (irq = 204, base_baud = 12000000) is a PL011 rev2 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 8 NET: Registered protocol family 20 clocksource: Switched to clocksource arm_global_timer VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered protocol family 44 Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=16 bucket_order=2 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs: driver 2.1.32 [Flags: R/W DEBUG]. jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. fuse: init (API version 7.32) Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) loop: module loaded libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage GACT probability NOT on Mirror/redirect action on u32 classifier input device check on Actions configured xt_time: kernel timezone is -0000 ipip: IPv4 and MPLS over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 l2tp_ip: L2TP IP encapsulation support (L2TPv3) l2tp_netlink: L2TP netlink interface l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Warning: unable to open an initial console. cfg80211: failed to load regulatory.db Freeing unused kernel memory: 1372K Kernel memory protection not selected by kernel config. Run /init as init process hi_crg: loading out-of-tree module taints kernel. [DFX] HSAN mlog_print function is unavailable... Basic driver of Linux Kernel install successfully ...! hi-reset reset0: resister reset device hi-reset reset@1: resister reset device hi-reset reset@2: resister reset device hi-reset reset@3: resister reset device hi-reset reset@4: resister reset device hi-reset reset@5: resister reset device hi-reset reset@6: resister reset device hi-reset reset@7: resister reset device hi-reset reset@8: resister reset device hi-reset reset@9: resister reset device 102a0000.fmc_acp : ON 10103000.dmac0_acp : ON 12000000.sec_acp : ON 12080000.pie_acp : ON watchdog: watchdog0 running and kernel based pre-userspace handler disabled HSAN FMC Controller Device Driver, Version 100 15 fixed-partitions partitions found on MTD device 102a0000.fmc Creating 15 MTD partitions on "102a0000.fmc": 0x000000000000-0x000000080000 : "esbc0_a" 0x000000080000-0x000000180000 : "uboota" 0x000000180000-0x000000280000 : "ubootb" 0x000000280000-0x000000300000 : "enva" 0x000000300000-0x000000380000 : "envb" 0x000000380000-0x000000580000 : "fac" 0x000000580000-0x000000780000 : "cfga" 0x000000780000-0x000000980000 : "cfgb" 0x000000980000-0x000000d80000 : "log" 0x000000d80000-0x000000e00000 : "pstore" 0x000000e00000-0x000001500000 : "kernela" 0x000001500000-0x000001c00000 : "kernelb" 0x000001c00000-0x000004900000 : "rootfsa" 0x000004900000-0x000007600000 : "rootfsb" 0x000007600000-0x000008000000 : "app" show boot_reg: 11 ubi0: attaching mtd12 ubi0: scanning is finished ubi0 error: ubi_read_volume_table [ubi]: the layout volume was not found ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd12, error -22 UBI error: cannot attach mtd12 UBI error: cannot initialize UBI, error -22 jffs2: Empty flash at 0x01d1c18c ends at 0x01d1c800 UBIFS error (pid 307): cannot initialize compressor lzo, error -2 gpio-dwapb 26006000.gpio: no IRQ for port0 hi_efuse_driver efuse:ns: match succ hi_efuse_driver efuse:extend_dieid: match succ hi_efuse_driver efuse:ate_trim: match succ hi_efuse_driver efuse:wifi: match succ hi_efuse_driver efuse:sec_boot_info: match succ hi_efuse_driver efuse:sec_logic_key: match succ hi_efuse_driver efuse:online: match succ hi_efuse_driver efuse:rompatch: match succ hi_efuse_driver efuse:trim_ext: match succ hi_efuse_driver efuse:userinfo: match succ cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1149999 KHz, changing to: 1150000 KHz clocksource: Switched to clocksource timer sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255551ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e664f33, max_idle_ns: 440795207478 ns set hsan,acp-sec acp attr succ cryp probe succ hi_upsphy upsphy@1: upsphy_probe done pie module commit_id:1195a7f5 clipper module commit_id:1195a7f5 pie 12080000.pie: open dma-coherent 3000000 set hsan,acp-pie acp attr succ pie 12080000.pie: Hisilicon pie swver=v210,hwver=v310 lsw module commit_id:1195a7f5 dp module commit_id:1195a7f5 [LSW]Hisilicon lsw dp swver=v300,hwver=v310,ret=0x0 pfe module commit_id:1195a7f5 [LSW]Hisilicon lsw pfe swver=v200,hwver=v310,ret=0x0 mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed phy module commit_id:1195a7f5 [GEPHY]Genius Phy hwVer:0x20669a22 fwVer:0x6e07 [GEPHY]Genius Phy adp version:v102 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 combophy module commit_id:1195a7f5 hi_upsphy set mode :15 combophy 11920000.serdes: Hisilicon combophy_v300 driver init pcs module commit_id:1195a7f5 pcs 144c0000.pcs: Hisilicon pcs driver init pcs module commit_id:1195a7f5 pcs 514c0000.pcs: Hisilicon pcs driver init misc module commit_id:1195a7f5 mii_misc 11920084.mii_misc: Hisilicon mii misc driver init misc module commit_id:1195a7f5 mii_misc 14000178.mii_misc_ge3_2p5: Hisilicon mii misc driver init serdes module commit_id:1195a7f5 cfe pub module commit_id:4319684c [CFE]CFE PUB module install successfully ...! cfe lrn module commit_id:4319684c [CFE]CFE LRN module install successfully ...! l3 lib module commit_id:4319684c [CFE]L3 LIB module install successfully ...! l4 lib module commit_id:4319684c [CFE]L4 LIB module install successfully ...! l2tp lib module commit_id:4319684c [CFE]L2TP LIB module install successfully ...! pptp lib module commit_id:4319684c [CFE]PPTP LIB module install successfully ...! dslite lib module commit_id:4319684c [CFE]DSLITE LIB module install successfully ...! mc lib module commit_id:4319684c [CFE]MC LIB module install successfully ...! mc list module commit_id:4319684c [CFE]MC LIST module install successfully ...! vxlan lib module commit_id:4319684c [CFE]VXLAN LIB module install successfully ...! cfe adp capa module commit_id:4319684c fermion module commit_id:1195a7f5 hi_fermion_probe g_module=0 lsw/hi_fermion_fw_woe.bin hi_fermion_init start [LSW]hi_quk_init done [LSW]compile_ver:50010 compile_time:0 [LSW]thread_symbol: name:"core1_thread07_entry" pc:0x0 [LSW]thread_symbol: name:"core0_thread01_entry" pc:0x4 [LSW]thread_symbol: name:"core0_thread00_entry" pc:0x906 [LSW]thread_symbol: name:"core1_thread04_entry" pc:0xcc3 [LSW]thread_symbol: name:"core1_thread06_entry" pc:0xfaa [LSW]thread_symbol: name:"core0_thread02_entry" pc:0x1322 [LSW]thread_symbol: name:"core1_thread05_entry" pc:0x148e [LSW]thread_symbol: name:"core0_thread03_entry" pc:0x14a5 [LSW]hi_load_sym_table::thread_cnt:8 hi_quk_dfx_init done. hi_fermion_init done. fermion 17500000.fermion: Hisilicon fermion swver=v10,hwver=v10,ret=0x0 xoe module commit_id:1195a7f5 lsw woe module commit_id:1195a7f5 match tx_msdu_info_item_num setting. dpu init finish. ret=00000000 lsw_woe lsw_woe: Hisilicon lsw_woe driver init wifi tiangong module commit_id:1195a7f5 woe_wifi_tiangong woe_wifi_tiangong: Hisilicon woe wifi driver init SUCC woe dev module commit_id:1195a7f5 init micro msg succ woe_dev woe_dev: Hisilicon woe driver init mount file system start mount file system end permission adapt start permission adapt end The board info is vendor_id=upt, chip_id=tiangong1, board_id=4331168(0x4216a0) The board.xml is exist, keep old board.xml init board sysctl_conf start sysctl_conf end ln /etc/localtime rm: can't remove '/etc/localtime': No such file or directory [HI_APPM] ########### Appm Start Begin ########### appm init begin ln: /usr/httpd/web/web_log/log: File exists tar: removing leading '/' from member names ln: /usr/httpd/web/webcmcc/config_file.tar.gz: No such file or directory begin ctcc_smart_prepare !!! jffs2: Empty flash at 0x009a2a98 ends at 0x009a3000 gateway module commit_id:d671f5d6 hi_notify_init succ hsan_boot (682): drop_caches: 3 [HI_APPM] [succ] init script [HI_APPM] [succ] init path [HI_APPM] [succ] init lib [HI_APPM] [succ] init app [HI_APPM] [succ] init group [HI_APPM] [succ] init db [HI_APPM] [succ] new process(752) [HI_APPM] [succ] <0> sysinfo [HI_APPM] [succ] start sysinfo [HI_APPM] [succ] new process(754) [HI_APPM] [succ] <0> syslog [HI_APPM] [succ] <1> crashlog [HI_APPM] [succ] start syslog [HI_APPM] [succ] new process(772) [HI_APPM] [succ] <0> sysstat [HI_APPM] [succ] start sysstat [HI_APPM] [succ] new process(773) [HI_APPM] [succ] <0> encrypt [HI_APPM] [succ] start encrypt [HI_APPM] [succ] new process(775) [HI_APPM] [succ] <0> board [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[1] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[2] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[3] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[4] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[5] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[6] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[7] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[8] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[9] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[11] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[12] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[13] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[14] [LED]Led init suc!!! Led data num = 2 [HI_APPM] [succ] <1> led [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[19] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[19] [HI_APPM] [succ] <2> key [HI_APPM] [succ] start ext_dev [HI_APPM] [succ] new process(778) Router mode url_init cfe xtables install succ! [WAN_ERR:hi_wan_port_attacth_netdev(332)]ifname port 00000008 not in global ports [HI_APPM] [succ] <0> wan Illegal target name 'DNS_DNAT_PORTAL'. Illegal target name 'DNS_DNAT_PORTAL'. lan init succ [HI_APPM] [succ] <1> lan [HI_APPM] [succ] start wan_lan [HI_APPM] [succ] new process(1076) [HI_APPM] [succ] <0> wlan insmod hostlimit succ!! wifi_version tiangong1&2 loading hslink module commit_id:4319684c [low_power_init]low_power_init: success [HI_APPM] [succ] <1> lanhost [HI_APPM] [succ] start host [HI_APPM] [succ] new process(1141) hi_qos_init ui_nf_conntrack_max= 61000 wlan_pm_open chip_id[0] region_info->resource NULL, base 0x26000000, 2097152, WIFI_PERI region_info->resource NULL, base 0x18200000, 4096, WIFI_GLB_CTL bus_msg_init success. plat_chip_chn_init success. [wlan_pm_init]wlan_pm_init ok! enter firmware_download_function download firmware file buf len is [524288] path=/lib/firmware/hi_wifi/FIRMWARE.bin path=/lib/firmware/hi_wifi/WCPU_DDR.bin finish download firmware [HI_APPM] [succ] <0>firmware_download success qosdownload firmware, count [1], current time [181530]us, max time [181530]us [wlan_power_on]power on, count [1], current time [188553]us, max time [188553]us [HI_APPM] [succ] start qos [HI_APPM] [succ] new process(1237) plat_excp_info_msg_process DEVICE EXCP_INFO Device plat ready! chip id : 0 wlan_pm_open SUCC chip_id[0] multi_chip_loading SUCC! custom_main_init:: chip_id=[0], len=[5336] not exist or contain wrong characters or end of file: magic_num ini_find_modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini failed!!! [WIFI_MAIN]{hal_cali_file_fill:: chip_id =0!} [HI_APPM] [succ] <0> sec Thu Jan 1 08:01:00 GMT-8 1970 random: fast init done [HI_APPM] [succ] <1> netapp [HI_APPM] [succ] <2> emu [HI_APPM] [succ] start netapp [HI_APPM] [succ] new process(1347) [HI_APPM] [succ] <0> upgrade [HI_APPM] [succ] <1> download [HI_APPM] [succ] start netservice [HI_APPM] [succ] new process(1349) #Init cm moudle# # Load CM config file# read deny! read deny! read deny! Load Config from default file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB Config_parser Succ. Load Config from factory config file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB Config_parser Succ. Load Config from preconf.xml config file ... Config_parser Succ. Load Config Default Succ. Config load Succ! ############ Start Distribute CM Config data ############ [sysuptime: 16] Distribute Early! [HI_APPM] [succ] <0> odl [HI_APPM] [succ] start cm [HI_APPM] [succ] init env [HI_APPM] [succ] init cmd [HI_APPM] [succ] init monitor [HI_APPM] ########### Appm Start End ########### parse 73 domain_name = para = router.ctc, 0xbef73ec4 [sysuptime: 16] Start init cm remote management module! device wan_4096 is already a member of a bridge; can't enslave it to bridge br0. udhcpc: started, v1.27.2 udhcpc: [62015] sending discover parse 73 domain_name = para = router.ctc, 0xbef6eec4 parse 73 domain_name = para = router.ctc, 0xbedabec4 error=0x7000000e function=__qos_wan_mixapp_add line=858 [Jul 10 2025-14:41:38], Receive Wan Connection Add Event, WanName [1_INTERNET_B_VID_]. udhcpc: [63006] sending discover parse 73 domain_name = para = router.ctc, 0xbe927ec4 killall: phddns: no process killed ############igdCmWanConnectionOption125Init Start ############ lTotalNum [0]. ############WanConnectionOption125 Attribute Table Init End ############ ############igdCmWanConnectionOption16Init Start ############ lTotalNum [0]. ############WanConnectionOption16 Attribute Table Init End ############ ############igdCmWanConnectionOption17Init Start ############ lTotalNum [0]. ############WanConnectionOption17 Attribute Table Init End ############ igdCmWanConnectionIPFwdRouteInit OK. [sysuptime: 18] Distribute Main! [XML_ERR:_mib_chain_get(235)] getXMLDir(471) fail! [WIFI_MAIN]wifi_init SUCC! hmac_init_np_soft_ba_addr:addr:0 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=0 amsdu_num=16 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=1 amsdu_num=16 5g the cali result to device succ {hmac_save_cali_data_to_file:: ret =35629!} hdpp_hslink_notify_init: succ excp wifi callback register chip0 iwpriv Hisilicon0 alg set_2g_dpd_power_param 016e0168 0170016b 0176016f 0161015d 01640160 016b0164 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_2g_dpd_low_power_param 014b0154 0158015b 014d0151 014e0153 01470151 01560155 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000000 01400140 01400140 01420141 0140013a 013a013a 01400138 013e013f 01400140 0140013d 0140013f 01390139 0140013b 013d013d 0140013c 01400140 01370140 01400140 013e0140 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000000 01400140 01400140 012c012c 0140012e 012d012e 0140012e 01310131 01400130 012f012f 01400129 012c0129 0140012d 012c012d 0140012b 01400140 01290140 01400140 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000001 01360136 01360136 01410140 0136013c 013f013b 0136013d 01430142 01360142 01490148 01360148 013c0140 0136013f 013f0143 01360142 01360136 013c0136 01360136 01440136 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000001 01360136 01360136 0130012d 01360131 01330132 01360133 01330133 01360133 01340134 01360132 012e0132 01360131 012c0130 0136012e 01360136 01320136 01360136 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_xo_ppm_cali_param 00004040 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_rssi_param 00000000 00000000 00000000 00000000 00000000 00000000 00000204 00000000 00080000 00000000 Hisilicon0 alg:[SUCC] tiangong1 wifi_version [HI_IPC] ipc call hi_hi_netif_set_ddos_rule_call fail, pid 0 ret 90000000, data0[3175010] udhcpc: [63975] sending discover [sysuptime: 19] Distribute Medium! vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 chip id is 0cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 chip id is 1cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostpad_pid is 1876 INFO::[NULL:97 nlc_wksp_init]create socket succ INFO::[NULL:68 nlc_netlink_create]netlink_create INFO::[NULL:70 nlc_netlink_create]nlc_netlink_create: netlink id[25]! INFO::[NULL:78 nlc_netlink_create]netlink socket create succ INFO::[NULL:86 nlc_netlink_create]bind netlink socket succ pid 1876's current affinity mask: 633a60 pid 1876's new affinity mask: 633a60 INFO::[NULL:243 nlc_netlink_recv_pthread]enter netlink_recv_pthread killall: app_acs: no process killed INFO::[NULL:54 nlc_msg_add_app_handler]app type:8 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=36438 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] INFO::[NULL:54 nlc_msg_add_app_handler]app type:3 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=57049 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] __hi_wifi_mode_set 14 del br vap0 Failed to connect to hostapd - wpa_ctrl_open: No such file or directory del br vap0 Failed to connect to hostapd - wpa_ctrl_open: No such file or directory del br vap0 Failed to connect to hostapd - wpa_ctrl_open: No such file or directory del br vap0 Failed to connect to hostapd - wpa_ctrl_open: No such file or directory vap0 alg:[SUCC]pow_mode = init random: hostapd: uninitialized urandom read (20 bytes read) udhcpc: no lease, failing auto rate __hi_wifi_comm_attr_submit hostapd_cli_remove: REMOVE vap0 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3070026572 ret 90000000, data0[812671350] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 0 hostapd_cli_remove: REMOVE vap8 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3070026572 ret 90000000, data0[946889078] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 4 __hi_wifi_mode_set 15 rootif mld0 que_pri 0 get_sch fail init qos info fail, ifname mld0 g_ssidnum_band[0]=4 g_ssidnum_band[1]=4 del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK parse 73 domain_name = para = router.ctc, 0xbe906ec4 vap8 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit Sorry, rule does not exist. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. parse 73 domain_name = para = router.ctc, 0xbef13ec4 iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? ip6tables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? lMeshParaChanged = 0 vap en is 1 [WLAN_DBG_ERR:hi_wifi_mld_vap_restart(736)]link_vap_2g->ui_vap_en=1 link_vap_5g->ui_vap_en=0 Sorry, rule does not exist. commit_proc: flag=2 lMeshParaChanged = 0 vap en is 0 del br vap1 hostapd_cli_remove: REMOVE vap1 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap2 hostapd_cli_remove: REMOVE vap2 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap3 hostapd_cli_remove: REMOVE vap3 OK Sorry, rule does not exist. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. lMeshParaChanged = 1 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 OK hostapd_cli_remove: REMOVE vap0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE hwifi_read_nv_config:find modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini tag_index:13 err!!! Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] random: hostapd: uninitialized urandom read (31 bytes read) random: hostapd: uninitialized urandom read (1024 bytes read) random: hostapd: uninitialized urandom read (31 bytes read) vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbed77ec4 lMeshParaChanged = 0 vap en is 0 del br vap9 hostapd_cli_remove: REMOVE vap9 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap10 hostapd_cli_remove: REMOVE vap10 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap11 hostapd_cli_remove: REMOVE vap11 OK lMeshParaChanged = 0 vap en is 0 del br vap2 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap2 OK sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory lMeshParaChanged = 0 vap en is 0 del br vap10 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap10 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory uiRepeaterEnable [1] ulRepeaterModeType[4] set g_repeater_mlo_mode to 0 g_ui_sta24:0 g_rootif vap20 que_pri 0 get_sch fail ui_sta58:0 g_mld_sta:0 init qos info fail, ifname vap20 rootif vap50 que_pri 0 get_sch fail init qos info fail, ifname vap50 pid 2553's current affinity mask: 5f3a60 pid 2553's new affinity mask: 5f3a60 success: IGD_CM_OPERATE_SUCCESS. pid 2579's current affinity mask: 663a60 pid 2579's new affinity mask: 663a60 killall: easymesh: no process killed bandsteering_enable1 ip6tables v1.8.2 (legacy): Couldn't load match `ipv6header':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. commit_proc: flag=1 nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading TELNET_ENABLE: 1 TELNET_PORT: 23 killall: telnetd: no process killed sh: syntax error: unexpected "(" SSH_ENABLE: 0 SSH_USER: SSH_PASSWD: SSH_PORT: killall: dropbear: no process killed killall: crond: no process killed nslookup: can't resolve '(null)' [sysuptime: 27] Distribute Tardy! ulIPver: 0 ulPingCnt: 4 ulBlkSize: 56 ulTimeout: 10000 ulInterval: 0 acWanIf: acHost: pc_waninterface: ifname: host: CM RepNum: 5 INFO [HI_EmAgentApiInit:431]HI_EmAgentApiInit success [XML_WRN:_mib_chain_get(243)] recordNum(0), id(699), final_idx(0), pCurr(0), pCurr->pData(0) hsan login: vap0: INTERFACE-DISABLED [sysuptime: 28] Distribute Finish! Failed to connect to ubus [UBUS:main(20)]ubus connect fail del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap8: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log Start webserver now hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 hostapd_cli_remove: REMOVE vap1 OK del br vap2 hostapd_cli_remove: REMOVE vap2 OK del br vap3 hostapd_cli_remove: REMOVE vap3 OK vap0: INTERFACE-DISABLED parse 73 domain_name = para = router.ctc, 0xbec98ec4 vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 hostapd_cli_remove: REMOVE vap11 OK parse 73 domain_name = para = router.ctc, 0xbedaeec4 vap8: INTERFACE-DISABLED vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit commit_proc: flag=1 nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' commit_proc: flag=1 nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:4. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:1. INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:6. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:5. nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' detect internet dns failed, waiting... nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' g_ssidnum_band[0]=4 g_ssidnum_band[1]=4 Invalid command : bsd_5g_load nslookup: can't resolve '(null)' name[password], ERR code[8] name[admin_password], ERR code[8] oldModeType [4] --> ulModeType [4]. lMeshParaChanged = 0 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 lMeshParaChanged = 0 vap0: INTERFACE-DISABLED vap8: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED vap8: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log parse 73 domain_name = para = router.ctc, 0xbebedec4 hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 nslookup: can't resolve 'query.hicloud.com' add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbeda4ec4 nslookup: can't resolve '(null)' Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument commit_proc: flag=6 Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' random: crng init done random: 6 urandom warning(s) missed due to ratelimiting nslookup: can't resolve '(null)' Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' hsan login: Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument root login: can't change directory to '/root' -ash: smart_env: not found / # / # / # / # cat /usr/lnslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' / # cat /usr/local/factory/board.xml / # nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' / # / # / # / # / # / # / # / # / # / # / # nslookup: can't resolve 'asia.pool.ntp.org' nslookup: can't resolve '(null)' hi_cfm set board.lan_ports eth0,eth1,eth2,,vap0,vap1,vap2,vap3,vap4,vap5,vap 6,vap7 vap8,vap9,vap10,vap11,vap12,vap13,vap14,vap15 bad parameters! try: hi_cfm help / # nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'query.hicloud.com' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' RTNETLINK answers: No such file or directory [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv6 DNS Servers, WanName [1_INTERNET_B_VID_]. [Jul 10 2025-14:41:38][sysuptime: 214], Receive PON Up Event. ############## Turn On Internet Led ############## udhcpc: started, v1.27.2 (re)starting transaction on br0ifconfig: bad address 'd' udhcpc: [259134] sending discover udhcpc: sending select for 192.168.1.39 [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] udhcpc: lease of 192.168.1.39 obtained, lease time 604800 udhcpc: received SIGTERM udhcpc: unicasting a release of 192.168.1.39 to 192.168.1.1 udhcpc: sending release udhcpc: bind(UDP): Address not available udhcpc: entering released state udhcpc: started, v1.27.2 udhcpc: [259484] sending discover udhcpc: sending select for 192.168.1.39 [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] udhcpc: lease of 192.168.1.39 obtained, lease time 604800 RTNETLINK answers: No such file or directory [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv4 ADDR CHANGE Event, WanName []. parse 73 domain_name = para = router.ctc, 0xbe94eec4 RTNETLINK answers: No such file or directory [Jul 10 2025-14:41:38], Receive Wan Connection Up Event, WanName [1_INTERNET_B_VID_]. vap0: INTERFACE-DISABLED Sorry, rule does not exist. Sorry, rule does not exist. del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 Sorry, rule does not exist. vap8: INTERFACE-DISABLED Sorry, rule does not exist. Sorry, rule does not exist. cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nslookup: can't resolve 'asia.pool.ntp.org' nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK RTNETLINK answers: File exists [Jul 10 2025-14:41:38], Send VOIP Connection Up Message. [Jul 10 2025-14:41:38], Receive Wan Connection Down Event, WanName [1_INTERNET_B_VID_]. hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. OK parse 73 domain_name = para = router.ctc, 0xbed07eb5 ############## Turn Off Internet Led ############## [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv4 ADDR CHANGE Event, WanName []. [Jul 10 2025-14:41:38], Receive Wan Connection Up Event, WanName [1_INTERNET_B_VID_]. hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 nslookup: can't resolve '(null)' hostapd_cli_remove: REMOVE vap1 OK del br vap2 parse 73 domain_name = para = router.ctc, 0xbe9c6eb5 hostapd_cli_remove: REMOVE vap2 OK del br vap3 ############## Turn On Internet Led ############## [Jul 10 2025-14:41:38], Send VOIP Connection Up Message. hostapd_cli_remove: REMOVE vap3 OK 10 Jul 15:20:29 ntpdate[6748]: step time server 132.163.97.6 offset 1752131767.716974 sec vap0: INTERFACE-DISABLED vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 parse 73 domain_name = para = router.ctc, 0xbecbaeb5 OK RTNETLINK answers: No such file or directory RTNETLINK answers: File exists RTNETLINK answers: File exists parse 73 domain_name = para = router.ctc, 0xbea24eb5 [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv6 DNS Servers, WanName [1_INTERNET_B_VID_]. hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 hostapd_cli_remove: REMOVE vap11 OK parse 73 domain_name = para = router.ctc, 0xbed71eb5 vap8: INTERFACE-DISABLED vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap0: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap8: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" nslookup: can't resolve 'asia.pool.ntp.org' sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 hostapd_cli_remove: REMOVE vap1 OK del br vap2 hostapd_cli_remove: REMOVE vap2 OK del br vap3 hostapd_cli_remove: REMOVE vap3 OK parse 73 domain_name = para = router.ctc, 0xbecadeb5 vap0: INTERFACE-DISABLED vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK nslookup: can't resolve '(null)' hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:28:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 hostapd_cli_remove: REMOVE vap11 OK vap8: INTERFACE-DISABLED parse 73 domain_name = para = router.ctc, 0xbe9d3eb5 vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit commit_proc: flag=1 nslookup: can't resolve 'asia.pool.ntp.org' commit_proc: flag=1 nslookup: can't resolve '(null)' Name: query.hicloud.com Address 1: 49.4.19.151 ecs-49-4-19-151.compute.hwclouds-dns.com Address 2: 49.4.32.196 ecs-49-4-32-196.compute.hwclouds-dns.com nslookup: can't resolve '(null)' Name: query.hicloud.com Address 1: 49.4.19.151 ecs-49-4-19-151.compute.hwclouds-dns.com Address 2: 49.4.32.196 ecs-49-4-32-196.compute.hwclouds-dns.com nslookup: can't resolve '(null)' Name: query.hicloud.com Address 1: 49.4.19.151 ecs-49-4-19-151.compute.hwclouds-dns.com Address 2: 49.4.32.196 ecs-49-4-32-196.compute.hwclouds-dns.com detect internet dns successfully, go... vote controller finish, I am agent commit_proc: flag=2 hrtimer: interrupt took 12417 ns ########### starting do completely restore, please wait for serveral seconds ########### bad parameters! cfmConfig 808 Load Config from default file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB Config_parser Succ. Load Config from factory config file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB Config_parser Succ. Load Config from preconf.xml config file ... Config_parser Succ. Load Config Default Succ. [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] rm: can't remove '/sys/fs/pstore': Resource busy bad parameters! bad parameters! [CM:complete_restore(1609)]Restore ctc framework. sh: dbus-send: not found ########### completely restore success ########### (re)starting transaction on br0udhcpc: sending renew udhcpc: received SIGTERM udhcpc: unicasting a release of 192.168.1.39 to 192.168.1.1 udhcpc: sending release udhcpc: entering released state ifconfig: bad address 'd' killall: pppd: no process killed parse 73 domain_name = para = router.ctc, 0xbec13eb5 killall: cms: no process killed reboot: Restarting system HI, BSBC! P:3101 P:1013 P:1018 P:3202 P:3700 P:3203 P:3204 P:1021 hi-esbc start boot_info.value a0000..... boot mode 2...... match board UPTV1D0_BE3600, board_id_val 4216a0 sec init spi hw init succ ??oot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17510438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81000 size 0x100 to addr 0x17511438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81100 size 0x1bf0 to addr 0x17511538 normal boot...... no secure boot, dont check sign...... no secure boot, dont check code image..... start ddrinit from addr 17511538 ddrinit finish This boot is main region 0 area...... nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read oob: offset 0xa0000 nand read oob: offset 0xc0000 nand read oob: offset 0xe0000 nand read: offset 0x83df0 size 0x783d8 to addr 0x80102000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont check code image..... check nvcnt...... check version start...... There is no version in efuse dice not support...... subkey_id = 0x00 esbc_mask = 0x01 bl_nvcnt = 0x01 start to uboot...... U-Boot 2022.07 (May 06 2025 - 15:17:07 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 140 devices, 18 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xe5, Chip ID: 0x71 Unknown DS35Q1GA Unknown DS35Q1GA 128 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 64 128 MiB Loading Environment from NAND... Scanning device for bad blocks OK In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 bootflag verify succ Reset Info: Linux reboot cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ hsan_pie pie: pie probe succ eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 bootreg offset: c0c boot regval: 10 boot from kernela and update reg to 11 hi_secboot_main sec init sec init succ drivers init succ boot_info.value a0000..... Size not on a page boundary (0x800), rounding to 0x800 Size not on a page boundary (0x800), rounding to 0x538000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont code check hash..... check nvcnt...... check version start...... There is no version in efuse dice not support...... flash boot succ...... uboot secboot exit name:56190527, serial_number:edd5da7e Image Name: Linux-5.10.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5352624 Bytes = 5.1 MiB Load Address: 80208000 Entry Point: 80208000 By default, the matching mode of hsan is used Match dtbo succ, chip = hsan,tiangong1, boardid = 4331168, vendorid = upt alias console=/uart1@10119000 serialnr->high=0x11, serialnr->low=0x10119000, atag_addr=0x80201000 SPI Nand Spec : Chip[134217728B] Block[131072B] Page[2048B] OOB[64B] ECC[4bit] Chip Name : DS35Q1GA ## Transferring control to Linux ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 5.10.0 (yliu@yliu) (arm-mix510-linux-gcc (musl-1.2.3 linux-5.10 V12CS61.003.020 2024-01-16 12:00:00) 10.3.0, GNU ld (GNU Binutils) 2.38) #2 SMP Thu Jul 10 14:42:19 CST 2025 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: hsan-tiangong1 OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 earlycon: pl11 at MMIO 0x10119000 (options '') printk: bootconsole [pl11] enabled Memory policy: Data cache writealloc OF: reserved mem: OVERLAP DETECTED! fermion (0x80000000--0x80200000) overlaps with mem@0x80000000 (0x80000000--0x80200000) Zone ranges: Normal [mem 0x0000000080200000-0x000000008fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000008b3fffff] node 0: [mem 0x000000008d800000-0x000000008d8fffff] node 0: [mem 0x000000008e400000-0x000000008fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] mdesc->l2c_aux_val 430001 mdesc->l2c_aux_mask ffb0fffe percpu: Embedded 20 pages/cpu s49932 r8192 d23796 u81920 Built 1 zonelists, mobility grouping on. Total pages: 52420 Kernel command line: noinitrd console=ttyAMA0,115200 earlycon cma=0 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) allocated 264192 bytes of page_ext mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 194408K/211968K available (8404K kernel code, 1430K rwdata, 2712K rodata, 1372K init, 532K bss, 17560K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 rcu: Hierarchical RCU implementation. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 192, preallocated irqs: 192 L2C: platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform tries to modify or specify cache size L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310: enabling full line of zeros but not enabled in Cortex-A9 L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 16 ways, 256 kB L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x46430001 random: get_random_bytes called from start_kernel+0x384/0x550 with crng_init=0 sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255550ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e6a221d, max_idle_ns: 440795213442 ns Switching to timer-based delay loop, resolution 3ns clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 39817925974 ns Ignoring duplicate/late registration of read_current_timer delay Calibrating delay loop (skipped), value calculated using timer frequency.. 575.00 BogoMIPS (lpj=2875000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) CPU: Testing write buffer coherency: ok CPU0: Spectre v2: using BPIALL workaround CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80208220 - 0x8020825c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU1: Spectre v2: using BPIALL workaround smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated (1150.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. Serial: AMBA PL011 UART driver OF: /gpio@10109000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@1010a000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@0x26006000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag 10119000.uart1: ttyAMA0 at MMIO 0x10119000 (irq = 203, base_baud = 0) is a SBSA printk: console [ttyAMA0] enabled printk: console [ttyAMA0] enabled printk: bootconsole [pl11] disabled printk: bootconsole [pl11] disabled 10118000.uart0: ttyAMA1 at MMIO 0x10118000 (irq = 204, base_baud = 12000000) is a PL011 rev2 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 8 NET: Registered protocol family 20 clocksource: Switched to clocksource arm_global_timer VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered protocol family 44 Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=16 bucket_order=2 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs: driver 2.1.32 [Flags: R/W DEBUG]. jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. fuse: init (API version 7.32) Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) loop: module loaded libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage GACT probability NOT on Mirror/redirect action on u32 classifier input device check on Actions configured xt_time: kernel timezone is -0000 ipip: IPv4 and MPLS over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 l2tp_ip: L2TP IP encapsulation support (L2TPv3) l2tp_netlink: L2TP netlink interface l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Warning: unable to open an initial console. cfg80211: failed to load regulatory.db Freeing unused kernel memory: 1372K Kernel memory protection not selected by kernel config. Run /init as init process hi_crg: loading out-of-tree module taints kernel. [DFX] HSAN mlog_print function is unavailable... Basic driver of Linux Kernel install successfully ...! hi-reset reset0: resister reset device hi-reset reset@1: resister reset device hi-reset reset@2: resister reset device hi-reset reset@3: resister reset device hi-reset reset@4: resister reset device hi-reset reset@5: resister reset device hi-reset reset@6: resister reset device hi-reset reset@7: resister reset device hi-reset reset@8: resister reset device hi-reset reset@9: resister reset device 102a0000.fmc_acp : ON 10103000.dmac0_acp : ON 12000000.sec_acp : ON 12080000.pie_acp : ON watchdog: watchdog0 running and kernel based pre-userspace handler disabled HSAN FMC Controller Device Driver, Version 100 15 fixed-partitions partitions found on MTD device 102a0000.fmc Creating 15 MTD partitions on "102a0000.fmc": 0x000000000000-0x000000080000 : "esbc0_a" 0x000000080000-0x000000180000 : "uboota" 0x000000180000-0x000000280000 : "ubootb" 0x000000280000-0x000000300000 : "enva" 0x000000300000-0x000000380000 : "envb" 0x000000380000-0x000000580000 : "fac" 0x000000580000-0x000000780000 : "cfga" 0x000000780000-0x000000980000 : "cfgb" 0x000000980000-0x000000d80000 : "log" 0x000000d80000-0x000000e00000 : "pstore" 0x000000e00000-0x000001500000 : "kernela" 0x000001500000-0x000001c00000 : "kernelb" 0x000001c00000-0x000004900000 : "rootfsa" 0x000004900000-0x000007600000 : "rootfsb" 0x000007600000-0x000008000000 : "app" show boot_reg: 11 ubi0: attaching mtd12 ubi0: scanning is finished ubi0 error: ubi_read_volume_table [ubi]: the layout volume was not found ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd12, error -22 UBI error: cannot attach mtd12 UBI error: cannot initialize UBI, error -22 jffs2: Empty flash at 0x01d1c18c ends at 0x01d1c800 UBIFS error (pid 307): cannot initialize compressor lzo, error -2 gpio-dwapb 26006000.gpio: no IRQ for port0 hi_efuse_driver efuse:ns: match succ hi_efuse_driver efuse:extend_dieid: match succ hi_efuse_driver efuse:ate_trim: match succ hi_efuse_driver efuse:wifi: match succ hi_efuse_driver efuse:sec_boot_info: match succ hi_efuse_driver efuse:sec_logic_key: match succ hi_efuse_driver efuse:online: match succ hi_efuse_driver efuse:rompatch: match succ hi_efuse_driver efuse:trim_ext: match succ hi_efuse_driver efuse:userinfo: match succ cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1149999 KHz, changing to: 1150000 KHz clocksource: Switched to clocksource timer sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255551ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e664f33, max_idle_ns: 440795207478 ns set hsan,acp-sec acp attr succ cryp probe succ hi_upsphy upsphy@1: upsphy_probe done pie module commit_id:1195a7f5 clipper module commit_id:1195a7f5 pie 12080000.pie: open dma-coherent 3000000 set hsan,acp-pie acp attr succ pie 12080000.pie: Hisilicon pie swver=v210,hwver=v310 lsw module commit_id:1195a7f5 dp module commit_id:1195a7f5 [LSW]Hisilicon lsw dp swver=v300,hwver=v310,ret=0x0 pfe module commit_id:1195a7f5 [LSW]Hisilicon lsw pfe swver=v200,hwver=v310,ret=0x0 mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed phy module commit_id:1195a7f5 [GEPHY]Genius Phy hwVer:0x20669a22 fwVer:0x6e07 [GEPHY]Genius Phy adp version:v102 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 combophy module commit_id:1195a7f5 hi_upsphy set mode :15 combophy 11920000.serdes: Hisilicon combophy_v300 driver init pcs module commit_id:1195a7f5 pcs 144c0000.pcs: Hisilicon pcs driver init pcs module commit_id:1195a7f5 pcs 514c0000.pcs: Hisilicon pcs driver init misc module commit_id:1195a7f5 mii_misc 11920084.mii_misc: Hisilicon mii misc driver init misc module commit_id:1195a7f5 mii_misc 14000178.mii_misc_ge3_2p5: Hisilicon mii misc driver init serdes module commit_id:1195a7f5 cfe pub module commit_id:4319684c [CFE]CFE PUB module install successfully ...! cfe lrn module commit_id:4319684c [CFE]CFE LRN module install successfully ...! l3 lib module commit_id:4319684c [CFE]L3 LIB module install successfully ...! l4 lib module commit_id:4319684c [CFE]L4 LIB module install successfully ...! l2tp lib module commit_id:4319684c [CFE]L2TP LIB module install successfully ...! pptp lib module commit_id:4319684c [CFE]PPTP LIB module install successfully ...! dslite lib module commit_id:4319684c [CFE]DSLITE LIB module install successfully ...! mc lib module commit_id:4319684c [CFE]MC LIB module install successfully ...! mc list module commit_id:4319684c [CFE]MC LIST module install successfully ...! vxlan lib module commit_id:4319684c [CFE]VXLAN LIB module install successfully ...! cfe adp capa module commit_id:4319684c fermion module commit_id:1195a7f5 hi_fermion_probe g_module=0 lsw/hi_fermion_fw_woe.bin hi_fermion_init start [LSW]hi_quk_init done [LSW]compile_ver:50010 compile_time:0 [LSW]thread_symbol: name:"core1_thread07_entry" pc:0x0 [LSW]thread_symbol: name:"core0_thread01_entry" pc:0x4 [LSW]thread_symbol: name:"core0_thread00_entry" pc:0x906 [LSW]thread_symbol: name:"core1_thread04_entry" pc:0xcc3 [LSW]thread_symbol: name:"core1_thread06_entry" pc:0xfaa [LSW]thread_symbol: name:"core0_thread02_entry" pc:0x1322 [LSW]thread_symbol: name:"core1_thread05_entry" pc:0x148e [LSW]thread_symbol: name:"core0_thread03_entry" pc:0x14a5 [LSW]hi_load_sym_table::thread_cnt:8 hi_quk_dfx_init done. hi_fermion_init done. fermion 17500000.fermion: Hisilicon fermion swver=v10,hwver=v10,ret=0x0 xoe module commit_id:1195a7f5 lsw woe module commit_id:1195a7f5 match tx_msdu_info_item_num setting. dpu init finish. ret=00000000 lsw_woe lsw_woe: Hisilicon lsw_woe driver init wifi tiangong module commit_id:1195a7f5 woe_wifi_tiangong woe_wifi_tiangong: Hisilicon woe wifi driver init SUCC woe dev module commit_id:1195a7f5 init micro msg succ woe_dev woe_dev: Hisilicon woe driver init mount file system start mount file system end permission adapt start permission adapt end The board info is vendor_id=upt, chip_id=tiangong1, board_id=4331168(0x4216a0) The board.xml is exist, keep old board.xml init board sysctl_conf start sysctl_conf end ln /etc/localtime rm: can't remove '/etc/localtime': No such file or directory [HI_APPM] ########### Appm Start Begin ########### appm init begin ln: /usr/httpd/web/web_log/log: File exists tar: removing leading '/' from member names ln: /usr/httpd/web/webcmcc/config_file.tar.gz: No such file or directory begin ctcc_smart_prepare !!! jffs2: Empty flash at 0x009a2a98 ends at 0x009a3000 gateway module commit_id:d671f5d6 hi_notify_init succ hsan_boot (682): drop_caches: 3 [HI_APPM] [succ] init script [HI_APPM] [succ] init path [HI_APPM] [succ] init lib [HI_APPM] [succ] init app [HI_APPM] [succ] init group [HI_APPM] [succ] init db [HI_APPM] [succ] new process(752) [HI_APPM] [succ] <0> sysinfo [HI_APPM] [succ] start sysinfo [HI_APPM] [succ] new process(754) [HI_APPM] [succ] <0> syslog [HI_APPM] [succ] <1> crashlog [HI_APPM] [succ] start syslog [HI_APPM] [succ] new process(772) [HI_APPM] [succ] <0> sysstat [HI_APPM] [succ] start sysstat [HI_APPM] [succ] new process(773) [HI_APPM] [succ] <0> encrypt [HI_APPM] [succ] start encrypt [HI_APPM] [succ] new process(775) [HI_APPM] [succ] <0> board [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[1] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[2] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[3] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[4] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[5] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[6] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[7] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[8] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[9] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[11] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[12] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[13] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[14] [LED]Led init suc!!! Led data num = 2 [HI_APPM] [succ] <1> led [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[19] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[19] [HI_APPM] [succ] <2> key [HI_APPM] [succ] start ext_dev [HI_APPM] [succ] new process(778) Router mode url_init cfe xtables install succ! [WAN_ERR:hi_wan_port_attacth_netdev(332)]ifname port 00000008 not in global ports [HI_APPM] [succ] <0> wan Illegal target name 'DNS_DNAT_PORTAL'. Illegal target name 'DNS_DNAT_PORTAL'. lan init succ [HI_APPM] [succ] <1> lan [HI_APPM] [succ] start wan_lan [HI_APPM] [succ] new process(1076) [HI_APPM] [succ] <0> wlan insmod hostlimit succ!! wifi_version tiangong1&2 loading hslink module commit_id:4319684c [low_power_init]low_power_init: success [HI_APPM] [succ] <1> lanhost [HI_APPM] [succ] start host [HI_APPM] [succ] new process(1141) hi_qos_init ui_nf_conntrack_max= 61000 wlan_pm_open chip_id[0] region_info->resource NULL, base 0x26000000, 2097152, WIFI_PERI region_info->resource NULL, base 0x18200000, 4096, WIFI_GLB_CTL bus_msg_init success. plat_chip_chn_init success. [wlan_pm_init]wlan_pm_init ok! enter firmware_download_function download firmware file buf len is [524288] path=/lib/firmware/hi_wifi/FIRMWARE.bin path=/lib/firmware/hi_wifi/WCPU_DDR.bin finish download firmware firmware_download success download firmware, count [1], current time [178087]us, max time [178087]us [wlan_power_on]power on, count [1], current time [184720]us, max time [184720]us plat_excp_info_msg_process DEVICE EXCP_INFO Device plat ready! chip id : 0 wlan_pm_open SUCC chip_id[0] multi_chip_loading SUCC! custom_main_init:: chip_id=[0], len=[5336] not exist or contain wrong characters or end of file: magic_num ini_find_modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini failed!!! [WIFI_MAIN]{hal_cali_file_fill:: chip_id =0!} [HI_APPM] [succ] <0> qos [HI_APPM] [succ] start qos [HI_APPM] [succ] new process(1240) random: fast init done [HI_APPM] [succ] <0> sec Thu Jan 1 08:01:00 GMT-8 1970 [HI_APPM] [succ] <1> netapp [HI_APPM] [succ] <2> emu [HI_APPM] [succ] start netapp [HI_APPM] [succ] new process(1349) [HI_APPM] [succ] <0> upgrade [HI_APPM] [succ] <1> download [HI_APPM] [succ] start netservice [HI_APPM] [succ] new process(1351) #Init cm moudle# # Load CM config file# read deny! read deny! read deny! Load Config from default file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB Config_parser Succ. Load Config from factory config file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB Config_parser Succ. Load Config from preconf.xml config file ... Config_parser Succ. Load Config Default Succ. Config load Succ! ############ Start Distribute CM Config data ############ [sysuptime: 16] Distribute Early! [HI_APPM] [succ] <0> odl [HI_APPM] [succ] start cm [HI_APPM] [succ] init env [HI_APPM] [succ] init cmd [HI_APPM] [succ] init monitor [HI_APPM] ########### Appm Start End ########### parse 73 domain_name = para = router.ctc, 0xbed2bec4 [sysuptime: 17] Start init cm remote management module! device wan_4096 is already a member of a bridge; can't enslave it to bridge br0. udhcpc: started, v1.27.2 udhcpc: [62036] sending discover udhcpc: sending select for 192.168.1.39 [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] udhcpc: lease of 192.168.1.39 obtained, lease time 604800 RTNETLINK answers: No such file or directory [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv4 ADDR CHANGE Event, WanName []. parse 73 domain_name = para = router.ctc, 0xbea38ec4 random: odhcp6c: uninitialized urandom read (4 bytes read) RTNETLINK answers: No such file or directory [WIFI_MAIN]wifi_init SUCC! hmac_init_np_soft_ba_addr:addr:0 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=0 amsdu_num=16 parse 73 domain_name = para = router.ctc, 0xbeff[WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=1 amsdu_num=16 6ec4 5g the cali result to device succ {hmac_save_cali_data_to_file:: ret =35629!} hdpp_hslink_notify_init: succ excp wifi callback register chip0 iwpriv Hisilicon0 alg set_2g_dpd_power_param 016e0168 0170016b 0176016f 0161015d 01640160 016b0164 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_2g_dpd_low_power_param 014b0154 0158015b 014d0151 014e0153 01470151 01560155 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000000 01400140 01400140 01420141 0140013a 013a013a 01400138 013e013f 01400140 0140013d 0140013f 01390139 0140013b 013d013d 0140013c 01400140 01370140 01400140 013e0140 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000000 01400140 01400140 012c012c 0140012e 012d012e 0140012e 01310131 01400130 012f012f 01400129 012c0129 0140012d 012c012d 0140012b 01400140 01290140 01400140 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000001 01360136 01360136 01410140 0136013c 013f013b 0136013d 01430142 01360142 01490148 01360148 013c0140 0136013f 013f0143 01360142 01360136 013c0136 01360136 01440136 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000001 01360136 01360136 0130012d 01360131 01330132 01360133 01330133 01360133 01340134 01360132 012e0132 01360131 012c0130 0136012e 01360136 01320136 01360136 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_xo_ppm_cali_param 00004040 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_rssi_param 00000000 00000000 00000000 00000000 00000000 00000000 00000204 00000000 00080000 00000000 Hisilicon0 alg:[SUCC] tiangong1 wifi_version error=0x7000000e function=__qos_wan_mixapp_add line=858 parse 73 domain_name = para = router.ctc, 0xbeedbec4 random: odhcp6c: uninitialized urandom read (3 bytes read) random: odhcp6c: uninitialized urandom read (4 bytes read) commit_proc: flag=1 __hi_wifi_comm_attr_submit __hi_wifi_comm_attr_submit killall: phddns: no process killed ############igdCmWanConnectionOption125Init Start ############ lTotalNum [0]. ############WanConnectionOption125 Attribute Table Init End ############ ############igdCmWanConnectionOption16Init Start ############ lTotalNum [0]. ############WanConnectionOption16 Attribute Table Init End ############ ############igdCmWanConnectionOption17Init Start ############ lTotalNum [0]. ############WanConnectionOption17 Attribute Table Init End ############ igdCmWanConnectionIPFwdRouteInit OK. [Jul 10 2025-14:41:38], Receive Wan Connection Up Event, WanName [1_INTERNET_B_VID_]. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. ############## Turn On Internet Led ############## [sysuptime: 19] Distribute Main! [XML_ERR:_mib_chain_get(235)] getXMLDir(471) fail! RTNETLINK answers: File exists [Jul 10 2025-14:41:38], Send VOIP Connection Up Message. [Jul 10 2025-14:41:38], Receive Wan Connection Add Event, WanName [1_INTERNET_B_VID_]. parse 73 domain_name = para = router.ctc, 0xbecf2ec4 [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv6 DNS Servers, WanName [1_INTERNET_B_VID_]. urandom_read: 2 callbacks suppressed random: odhcp6c: uninitialized urandom read (4 bytes read) [HI_IPC] ipc call hi_hi_netif_set_ddos_rule_call fail, pid 0 ret 90000000, data0[3175010] [sysuptime: 20] Distribute Medium! vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 chip id is 0cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 chip id is 1cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log INFO::[NULL:97 nlc_wksp_init]create socket succ INFO::[NULL:68 nlc_netlink_create]netlink_create INFO::[NULL:70 nlc_netlink_create]nlc_netlink_create: netlink id[25]! INFO::[NULL:78 nlc_netlink_create]netlink socket create succ INFO::[NULL:86 nlc_netlink_create]bind netlink socket succ INFO::[NULL:243 nlc_netlink_recv_pthread]enter netlink_recv_pthread hostpad_pid is 2175 pid 2175's current affinity mask: 643a60 pid 2175's new affinity mask: 643a60 random: hostapd: uninitialized urandom read (20 bytes read) killall: app_acs: no process killed INFO::[NULL:54 nlc_msg_add_app_handler]app type:8 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=37996 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] __hi_wifi_mode_set 14 INFO::[NULL:54 nlc_msg_add_app_handler]app type:3 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=36973 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK vap0 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit hostapd_cli_remove: REMOVE vap0 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069518668 ret 90000000, data0[812671350] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 0 hostapd_cli_remove: REMOVE vap8 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069518668 ret 90000000, data0[946889078] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 8 __hi_wifi_mode_set 15 rootif mld0 que_pri 0 get_sch fail init qos info fail, ifname mld0 g_ssidnum_band[0]=8 g_ssidnum_band[1]=8 random: odhcp6c: uninitialized urandom read (4 bytes read) del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 parse 73 domain_name = para = router.ctc, 0xbe838eb5 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK vap8 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit Sorry, rule does not exist. parse 73 domain_name = para = router.ctc, 0xbe8d1eb5 iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? ip6tables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? lMeshParaChanged = 0 vap en is 1 [WLAN_DBG_ERR:hi_wifi_mld_vap_restart(736)]link_vap_2g->ui_vap_en=1 link_vap_5g->ui_vap_en=0 Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap1 hostapd_cli_remove: REMOVE vap1 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap2 hostapd_cli_remove: REMOVE vap2 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap3 hostapd_cli_remove: REMOVE vap3 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap4 hostapd_cli_remove: REMOVE vap4 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap5 hostapd_cli_remove: REMOVE vap5 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap6 hostapd_cli_remove: REMOVE vap6 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap7 hostapd_cli_remove: REMOVE vap7 OK Sorry, rule does not exist. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. lMeshParaChanged = 1 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 OK hostapd_cli_remove: REMOVE vap0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE hwifi_read_nv_config:find modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini tag_index:13 err!!! Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] random: hostapd: uninitialized urandom read (31 bytes read) random: hostapd: uninitialized urandom read (1024 bytes read) vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbee9eeb5 lMeshParaChanged = 0 vap en is 0 del br vap9 hostapd_cli_remove: REMOVE vap9 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap10 hostapd_cli_remove: REMOVE vap10 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap11 hostapd_cli_remove: REMOVE vap11 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap12 hostapd_cli_remove: REMOVE vap12 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap13 hostapd_cli_remove: REMOVE vap13 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap14 hostapd_cli_remove: REMOVE vap14 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap15 hostapd_cli_remove: REMOVE vap15 OK lMeshParaChanged = 0 vap en is 0 del br vap1 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap1 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory lMeshParaChanged = 0 vap en is 0 del br vap9 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap9 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlanrootif vap20 que_pri 0 get_sch fail _share/config: nonexistent direcinit qos info fail, ifname vap20 tory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory uiRepeaterEnable [1] ulRepeaterModeType[4] set g_repeater_mlo_mode to 0 g_ui_sta24:0 g_ui_sta58:0 g_mld_sta:0 rootif vap50 que_pri 0 get_sch fail init qos info fail, ifname vap50 pid 3057's current affinity mask: 673a60 pid 3057's new affinity mask: 673a60 success: IGD_CM_OPERATE_SUCCESS. killall: easymesh: no process killed pid 3082's current affinity mask: 603a60 pid 3082's new affinity mask: 603a60 bandsteering_enable1 commit_proc: flag=1 ip6tables v1.8.2 (legacy): Couldn't load match `ipv6header':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading TELNET_ENABLE: 1 TELNET_PORT: 23 killall: telnetd: no process killed sh: syntax error: unexpected "(" SSH_ENABLE: 0 SSH_USER: SSH_PASSWD: SSH_PORT: killall: dropbear: no process killed killall: crond: no process killed [sysuptime: 29] Distribute Tardy! ulIPver: 0 ulPingCnt: 4 ulBlkSize: 56 ulTimeout: 10000 ulInterval: 0 acWanIf: acHost: pc_waninterface: ifname: host: CM RepNum: 5 INFO [HI_EmAgentApiInit:431]HI_EmAgentApiInit success [XML_WRN:_mib_chain_get(243)] recordNum(0), id(699), final_idx(0), pCurr(0), pCurr->pData(0) nslookup: can't resolve '(null)' hsan login: vap0: INTERFACE-DISABLED [sysuptime: 30] Distribute Finish! del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 1970-01-01 08:01:14.908 [debug] init_run: start appd (/bin/appd) vap8: INTERFACE-DISABLED [UBUS:hi_load_existing_lan(393)]hi_load_existing_lan 393 fail! [UBUS:hi_load_existing_dns(267)]hi_load_existing_dns 267 fail! [UBUS:hi_load_existing_url(373)]hi_load_existing_url 373 fail! cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 Start webserver now nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 hostapd_cli_remove: REMOVE vap1 OK del br vap2 hostapd_cli_remove: REMOVE vap2 OK del br vap3 hostapd_cli_remove: REMOVE vap3 OK del br vap4 hostapd_cli_remove: REMOVE vap4 OK del br vap5 hostapd_cli_remove: REMOVE vap5 OK del br vap6 parse 73 domain_name = para = router.ctc, 0xbe8b8eb5 hostapd_cli_remove: REMOVE vap6 OK del br vap7 hostapd_cli_remove: REMOVE vap7 OK vap0: INTERFACE-DISABLED vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_ifahrtimer: interrupt took 28583 ns ce is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 hostapd_cli_remove: REMOVE vap11 OK del br vap12 hostapd_cli_remove: REMOVE vap12 OK del br vap13 parse 73 domain_name = para = router.ctc, 0xbebcaeb5 hostapd_cli_remove: REMOVE vap13 OK del br vap14 hostapd_cli_remove: REMOVE vap14 OK del br vap15 hostapd_cli_remove: REMOVE vap15 OK vap8: INTERFACE-DISABLED vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit Invalid command : bsd_5g_load [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 1! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! [UBUS:_ubus_notify_handler(49)]'ctcapd.laninfo' 'devicestatus' '{"mac":"00:e0:70:c6:73:49","active":0}' nslookup: can't resolve 'cn.pool.ntp.org' [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 1! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! [UBUS:_ubus_notify_handler(49)]'ctcapd.laninfo' 'newdevice' '{"mac":"00:e0:70:c6:73:49","vmac":"","connecttype":0,"port":2,"hostname":""}' [UBUS:_add_laninfo_obj(481)]hi_dynamically_add_object error Invalid command : bsd_5g_load [UBUS:hi_ctcapd_wifi_mesh_set(353)]hi_parameter_check_func fail! nslookup: can't resolve '(null)' commit_proc: flag=6 nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' Name: cn.pool.ntp.org Address 1: 202.118.1.81 time.neu.edu.cn Address 2: 202.118.1.130 time.neu.edu.cn Address 3: 162.159.200.1 time.cloudflare.com Address 4: 84.16.67.12 tock.ntp.infomaniak.ch nslookup: can't resolve '(null)' Name: asia.pool.ntp.org Address 1: 103.186.118.222 INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:8. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:1. INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:10. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:9. Address 2: 103.147.22.149 tw.ntp.twds.com.tw Address 3: 103.186.118.211 Address 4: 103.186.118.221 nslookup: can't resolve '(null)' Name: asia.pool.ntp.org Address 1: 103.186.118.222 Address 2: 103.186.118.211 Address 3: 103.186.118.221 Address 4: 103.147.22.149 tw.ntp.twds.com.tw nslookup: can't resolve '(null)' Name: asia.pool.ntp.org Address 1: 103.186.118.221 Address 2: 103.147.22.149 tw.ntp.twds.com.tw Address 3: 103.186.118.222 Address 4: 103.186.118.211 detect internet dns successfully, go... vote controller finish, I am agent commit_proc: flag=2 10 Jul 15:26:07 ntpdate[4695]: step time server 129.6.15.27 offset 1752132245.885164 sec commit_proc: flag=6 g_ssidnum_band[0]=8 g_ssidnum_band[1]=8 Invalid command : bsd_5g_load name[password], ERR code[8] name[admin_password], ERR code[8] oldModeType [4] --> ulModeType [4]. [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 9! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! lMeshParaChanged = 0 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED vap8: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 9! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbee8feb5 Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument commit_proc: flag=6 Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument random: crng init done Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument [UBUS:hi_ctcapd_getrebootstatus(164)]REBOOT 2 commit_proc: flag=4 hsan login: hsan login: hsan login: hsan login: root login: can't change directory to '/root' -ash: smart_env: not found / # ubus call ctcapd reset sendUbusMsg failed. ########### starting do completely restore, please wait for serveral seconds ########### bad parameters! cfmConfig 808 Load Config from default file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB Config_parser Succ. Load Config from factory config file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB Config_parser Succ. Load Config from preconf.xml config file ... Config_parser Succ. Load Config [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] Default Succ. rm: can't remove '/sys/fs/pstore': Resource busy bad parameters! bad parameters! [CM:complete_restore(1609)]Restore ctc framework. sh: dbus-send: not found ########### completely restore success ########### [HI_IPC] ipc call hi_IPC_igdCmRebootInfo_call fail, pid 1351 ret ffffffff, data0[536870925] (re)starting transaction on br0ifconfig: bad address 'd' udhcpc: sending renew udhcpc: received SIGTERM udhcpc: unicasting a release of 192.168.1.39 to 192.168.1.1 udhcpc: sending release udhcpc: entering released state killall: pppd: no process killed parse 73 domain_name = para = router.ctc, 0xbe9f0eb5 killall: cms: no process killed reboot: Restarting system HI, BSBC! P:3101 P:1013 P:1018 P:3202 P:3700 P:3203 P:3204 P:1021 hi-esbc start boot_info.value a0000..... boot mode 2...... match board UPTV1D0_BE3600, board_id_val 4216a0 sec init spi hw init succ ??oot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17510438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81000 size 0x100 to addr 0x17511438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81100 size 0x1bf0 to addr 0x17511538 normal boot...... no secure boot, dont check sign...... no secure boot, dont check code image..... start ddrinit from addr 17511538 ddrinit finish This boot is main region 0 area...... nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read oob: offset 0xa0000 nand read oob: offset 0xc0000 nand read oob: offset 0xe0000 nand read: offset 0x83df0 size 0x783d8 to addr 0x80102000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont check code image..... check nvcnt...... check version start...... There is no version in efuse dice not support...... subkey_id = 0x00 esbc_mask = 0x01 bl_nvcnt = 0x01 start to uboot...... U-Boot 2022.07 (May 06 2025 - 15:17:07 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 140 devices, 18 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xe5, Chip ID: 0x71 Unknown DS35Q1GA Unknown DS35Q1GA 128 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 64 128 MiB Loading Environment from NAND... Scanning device for bad blocks OK In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 bootflag verify succ Reset Info: Linux reboot cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ hsan_pie pie: pie probe succ eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 bootreg offset: c0c boot regval: 10 boot from kernela and update reg to 11 hi_secboot_main sec init sec init succ drivers init succ boot_info.value a0000..... Size not on a page boundary (0x800), rounding to 0x800 Size not on a page boundary (0x800), rounding to 0x538000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont code check hash..... check nvcnt...... check version start...... There is no version in efuse dice not support...... flash boot succ...... uboot secboot exit name:56190527, serial_number:edd5da7e Image Name: Linux-5.10.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5352624 Bytes = 5.1 MiB Load Address: 80208000 Entry Point: 80208000 By default, the matching mode of hsan is used Match dtbo succ, chip = hsan,tiangong1, boardid = 4331168, vendorid = upt alias console=/uart1@10119000 serialnr->high=0x11, serialnr->low=0x10119000, atag_addr=0x80201000 SPI Nand Spec : Chip[134217728B] Block[131072B] Page[2048B] OOB[64B] ECC[4bit] Chip Name : DS35Q1GA ## Transferring control to Linux ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 5.10.0 (yliu@yliu) (arm-mix510-linux-gcc (musl-1.2.3 linux-5.10 V12CS61.003.020 2024-01-16 12:00:00) 10.3.0, GNU ld (GNU Binutils) 2.38) #2 SMP Thu Jul 10 14:42:19 CST 2025 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: hsan-tiangong1 OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 earlycon: pl11 at MMIO 0x10119000 (options '') printk: bootconsole [pl11] enabled Memory policy: Data cache writealloc OF: reserved mem: OVERLAP DETECTED! fermion (0x80000000--0x80200000) overlaps with mem@0x80000000 (0x80000000--0x80200000) Zone ranges: Normal [mem 0x0000000080200000-0x000000008fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000008b3fffff] node 0: [mem 0x000000008d800000-0x000000008d8fffff] node 0: [mem 0x000000008e400000-0x000000008fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] mdesc->l2c_aux_val 430001 mdesc->l2c_aux_mask ffb0fffe percpu: Embedded 20 pages/cpu s49932 r8192 d23796 u81920 Built 1 zonelists, mobility grouping on. Total pages: 52420 Kernel command line: noinitrd console=ttyAMA0,115200 earlycon cma=0 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) allocated 264192 bytes of page_ext mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 194408K/211968K available (8404K kernel code, 1430K rwdata, 2712K rodata, 1372K init, 532K bss, 17560K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 rcu: Hierarchical RCU implementation. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 192, preallocated irqs: 192 L2C: platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform tries to modify or specify cache size L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310: enabling full line of zeros but not enabled in Cortex-A9 L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 16 ways, 256 kB L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x46430001 random: get_random_bytes called from start_kernel+0x384/0x550 with crng_init=0 sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255550ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e6a221d, max_idle_ns: 440795213442 ns Switching to timer-based delay loop, resolution 3ns clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 39817925974 ns Ignoring duplicate/late registration of read_current_timer delay Calibrating delay loop (skipped), value calculated using timer frequency.. 575.00 BogoMIPS (lpj=2875000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) CPU: Testing write buffer coherency: ok CPU0: Spectre v2: using BPIALL workaround CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80208220 - 0x8020825c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU1: Spectre v2: using BPIALL workaround smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated (1150.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. Serial: AMBA PL011 UART driver OF: /gpio@10109000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@1010a000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@0x26006000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag 10119000.uart1: ttyAMA0 at MMIO 0x10119000 (irq = 203, base_baud = 0) is a SBSA printk: console [ttyAMA0] enabled printk: console [ttyAMA0] enabled printk: bootconsole [pl11] disabled printk: bootconsole [pl11] disabled 10118000.uart0: ttyAMA1 at MMIO 0x10118000 (irq = 204, base_baud = 12000000) is a PL011 rev2 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 8 NET: Registered protocol family 20 clocksource: Switched to clocksource arm_global_timer VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered protocol family 44 Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=16 bucket_order=2 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs: driver 2.1.32 [Flags: R/W DEBUG]. jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. fuse: init (API version 7.32) Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) loop: module loaded libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage GACT probability NOT on Mirror/redirect action on u32 classifier input device check on Actions configured xt_time: kernel timezone is -0000 ipip: IPv4 and MPLS over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 l2tp_ip: L2TP IP encapsulation support (L2TPv3) l2tp_netlink: L2TP netlink interface l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Warning: unable to open an initial console. cfg80211: failed to load regulatory.db Freeing unused kernel memory: 1372K Kernel memory protection not selected by kernel config. Run /init as init process hi_crg: loading out-of-tree module taints kernel. [DFX] HSAN mlog_print function is unavailable... Basic driver of Linux Kernel install successfully ...! hi-reset reset0: resister reset device hi-reset reset@1: resister reset device hi-reset reset@2: resister reset device hi-reset reset@3: resister reset device hi-reset reset@4: resister reset device hi-reset reset@5: resister reset device hi-reset reset@6: resister reset device hi-reset reset@7: resister reset device hi-reset reset@8: resister reset device hi-reset reset@9: resister reset device 102a0000.fmc_acp : ON 10103000.dmac0_acp : ON 12000000.sec_acp : ON 12080000.pie_acp : ON watchdog: watchdog0 running and kernel based pre-userspace handler disabled HSAN FMC Controller Device Driver, Version 100 15 fixed-partitions partitions found on MTD device 102a0000.fmc Creating 15 MTD partitions on "102a0000.fmc": 0x000000000000-0x000000080000 : "esbc0_a" 0x000000080000-0x000000180000 : "uboota" 0x000000180000-0x000000280000 : "ubootb" 0x000000280000-0x000000300000 : "enva" 0x000000300000-0x000000380000 : "envb" 0x000000380000-0x000000580000 : "fac" 0x000000580000-0x000000780000 : "cfga" 0x000000780000-0x000000980000 : "cfgb" 0x000000980000-0x000000d80000 : "log" 0x000000d80000-0x000000e00000 : "pstore" 0x000000e00000-0x000001500000 : "kernela" 0x000001500000-0x000001c00000 : "kernelb" 0x000001c00000-0x000004900000 : "rootfsa" 0x000004900000-0x000007600000 : "rootfsb" 0x000007600000-0x000008000000 : "app" show boot_reg: 11 ubi0: attaching mtd12 ubi0: scanning is finished ubi0 error: ubi_read_volume_table [ubi]: the layout volume was not found ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd12, error -22 UBI error: cannot attach mtd12 UBI error: cannot initialize UBI, error -22 jffs2: Empty flash at 0x01d1c18c ends at 0x01d1c800 UBIFS error (pid 306): cannot initialize compressor lzo, error -2 gpio-dwapb 26006000.gpio: no IRQ for port0 hi_efuse_driver efuse:ns: match succ hi_efuse_driver efuse:extend_dieid: match succ hi_efuse_driver efuse:ate_trim: match succ hi_efuse_driver efuse:wifi: match succ hi_efuse_driver efuse:sec_boot_info: match succ hi_efuse_driver efuse:sec_logic_key: match succ hi_efuse_driver efuse:online: match succ hi_efuse_driver efuse:rompatch: match succ hi_efuse_driver efuse:trim_ext: match succ hi_efuse_driver efuse:userinfo: match succ cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1149999 KHz, changing to: 1150000 KHz clocksource: Switched to clocksource timer sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255551ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e664f33, max_idle_ns: 440795207478 ns set hsan,acp-sec acp attr succ cryp probe succ hi_upsphy upsphy@1: upsphy_probe done pie module commit_id:1195a7f5 clipper module commit_id:1195a7f5 pie 12080000.pie: open dma-coherent 3000000 set hsan,acp-pie acp attr succ pie 12080000.pie: Hisilicon pie swver=v210,hwver=v310 lsw module commit_id:1195a7f5 dp module commit_id:1195a7f5 [LSW]Hisilicon lsw dp swver=v300,hwver=v310,ret=0x0 pfe module commit_id:1195a7f5 [LSW]Hisilicon lsw pfe swver=v200,hwver=v310,ret=0x0 mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed phy module commit_id:1195a7f5 [GEPHY]Genius Phy hwVer:0x20669a22 fwVer:0x6e07 [GEPHY]Genius Phy adp version:v102 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 combophy module commit_id:1195a7f5 hi_upsphy set mode :15 combophy 11920000.serdes: Hisilicon combophy_v300 driver init pcs module commit_id:1195a7f5 pcs 144c0000.pcs: Hisilicon pcs driver init pcs module commit_id:1195a7f5 pcs 514c0000.pcs: Hisilicon pcs driver init misc module commit_id:1195a7f5 mii_misc 11920084.mii_misc: Hisilicon mii misc driver init misc module commit_id:1195a7f5 mii_misc 14000178.mii_misc_ge3_2p5: Hisilicon mii misc driver init serdes module commit_id:1195a7f5 cfe pub module commit_id:4319684c [CFE]CFE PUB module install successfully ...! cfe lrn module commit_id:4319684c [CFE]CFE LRN module install successfully ...! l3 lib module commit_id:4319684c [CFE]L3 LIB module install successfully ...! l4 lib module commit_id:4319684c [CFE]L4 LIB module install successfully ...! l2tp lib module commit_id:4319684c [CFE]L2TP LIB module install successfully ...! pptp lib module commit_id:4319684c [CFE]PPTP LIB module install successfully ...! dslite lib module commit_id:4319684c [CFE]DSLITE LIB module install successfully ...! mc lib module commit_id:4319684c [CFE]MC LIB module install successfully ...! mc list module commit_id:4319684c [CFE]MC LIST module install successfully ...! vxlan lib module commit_id:4319684c [CFE]VXLAN LIB module install successfully ...! cfe adp capa module commit_id:4319684c fermion module commit_id:1195a7f5 hi_fermion_probe g_module=0 lsw/hi_fermion_fw_woe.bin hi_fermion_init start [LSW]hi_quk_init done [LSW]compile_ver:50010 compile_time:0 [LSW]thread_symbol: name:"core1_thread07_entry" pc:0x0 [LSW]thread_symbol: name:"core0_thread01_entry" pc:0x4 [LSW]thread_symbol: name:"core0_thread00_entry" pc:0x906 [LSW]thread_symbol: name:"core1_thread04_entry" pc:0xcc3 [LSW]thread_symbol: name:"core1_thread06_entry" pc:0xfaa [LSW]thread_symbol: name:"core0_thread02_entry" pc:0x1322 [LSW]thread_symbol: name:"core1_thread05_entry" pc:0x148e [LSW]thread_symbol: name:"core0_thread03_entry" pc:0x14a5 [LSW]hi_load_sym_table::thread_cnt:8 hi_quk_dfx_init done. hi_fermion_init done. fermion 17500000.fermion: Hisilicon fermion swver=v10,hwver=v10,ret=0x0 xoe module commit_id:1195a7f5 lsw woe module commit_id:1195a7f5 match tx_msdu_info_item_num setting. dpu init finish. ret=00000000 lsw_woe lsw_woe: Hisilicon lsw_woe driver init wifi tiangong module commit_id:1195a7f5 woe_wifi_tiangong woe_wifi_tiangong: Hisilicon woe wifi driver init SUCC woe dev module commit_id:1195a7f5 init micro msg succ woe_dev woe_dev: Hisilicon woe driver init mount file system start mount file system end permission adapt start permission adapt end The board info is vendor_id=upt, chip_id=tiangong1, board_id=4331168(0x4216a0) The board.xml is exist, keep old board.xml init board sysctl_conf start sysctl_conf end ln /etc/localtime rm: can't remove '/etc/localtime': No such file or directory [HI_APPM] ########### Appm Start Begin ########### appm init begin ln: /usr/httpd/web/web_log/log: File exists tar: removing leading '/' from member names ln: /usr/httpd/web/webcmcc/config_file.tar.gz: No such file or directory begin ctcc_smart_prepare !!! jffs2: Empty flash at 0x009a2a98 ends at 0x009a3000 gateway module commit_id:d671f5d6 hi_notify_init succ hsan_boot (682): drop_caches: 3 [HI_APPM] [succ] init script [HI_APPM] [succ] init path [HI_APPM] [succ] init lib [HI_APPM] [succ] init app [HI_APPM] [succ] init group [HI_APPM] [succ] init db [HI_APPM] [succ] new process(752) [HI_APPM] [succ] <0> sysinfo [HI_APPM] [succ] start sysinfo [HI_APPM] [succ] new process(754) [HI_APPM] [succ] <0> syslog [HI_APPM] [succ] <1> crashlog [HI_APPM] [succ] start syslog [HI_APPM] [succ] new process(772) [HI_APPM] [succ] <0> sysstat [HI_APPM] [succ] start sysstat [HI_APPM] [succ] new process(773) [HI_APPM] [succ] <0> encrypt [HI_APPM] [succ] start encrypt [HI_APPM] [succ] new process(775) [HI_APPM] [succ] <0> board [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[1] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[2] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[3] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[4] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[5] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[6] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[7] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[8] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[9] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[11] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[12] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[13] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[14] [LED]Led init suc!!! Led data num = 2 [HI_APPM] [succ] <1> led [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[19] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[19] [HI_APPM] [succ] <2> key [HI_APPM] [succ] start ext_dev [HI_APPM] [succ] new process(778) Router mode url_init cfe xtables install succ! [WAN_ERR:hi_wan_port_attacth_netdev(332)]ifname port 00000008 not in global ports [HI_APPM] [succ] <0> wan Illegal target name 'DNS_DNAT_PORTAL'. Illegal target name 'DNS_DNAT_PORTAL'. lan init succ [HI_APPM] [succ] <1> lan [HI_APPM] [succ] start wan_lan [HI_APPM] [succ] new process(1076) [HI_APPM] [succ] <0> wlan insmod hostlimit succ!! wifi_version tiangong1&2 loading hslink module commit_id:4319684c [low_power_init]low_power_init: success [HI_APPM] [succ] <1> lanhost [HI_APPM] [succ] start host [HI_APPM] [succ] new process(1141) hi_qos_init ui_nf_conntrack_max= 61000 wlan_pm_open chip_id[0] region_info->resource NULL, base 0x26000000, 2097152, WIFI_PERI region_info->resource NULL, base 0x18200000, 4096, WIFI_GLB_CTL bus_msg_init success. plat_chip_chn_init success. [wlan_pm_init]wlan_pm_init ok! enter firmware_download_function download firmware file buf len is [524288] path=/lib/firmware/hi_wifi/FIRMWARE.bin path=/lib/firmware/hi_wifi/WCPU_DDR.bin finish download firmware firmware_download success download firmware, count [1], current time [186453]us, max time [186453]us [wlan_power_on]power on, count [1], current time [193116]us, max time [193116]us plat_excp_info_msg_process DEVICE EXCP_INFO Device plat ready! chip id : 0 wlan_pm_open SUCC chip_id[0] multi_chip_loading SUCC! custom_main_init:: chip_id=[0], len=[5336] not exist or contain wrong characters or end of file: magic_num ini_find_modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini failed!!! [WIFI_MAIN]{hal_cali_file_fill:: chip_id =0!} [HI_APPM] [succ] <0> qos [HI_APPM] [succ] start qos [HI_APPM] [succ] new process(1244) random: fast init done [HI_APPM] [succ] <0> sec Thu Jan 1 08:01:00 GMT-8 1970 [HI_APPM] [succ] <1> netapp [HI_APPM] [succ] <2> emu [HI_APPM] [succ] start netapp [HI_APPM] [succ] new process(1349) [HI_APPM] [succ] <0> upgrade [HI_APPM] [succ] <1> download [HI_APPM] [succ] start netservice [HI_APPM] [succ] new process(1351) #Init cm moudle# # Load CM config file# read deny! read deny! read deny! Load Config from default file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB Config_parser Succ. Load Config from factory config file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB Config_parser Succ. Load Config from preconf.xml config file ... Config_parser Succ. Load Config Default Succ. Config load Succ! ############ Start Distribute CM Config data ############ [sysuptime: 16] Distribute Early! [HI_APPM] [succ] <0> odl [HI_APPM] [succ] start cm [HI_APPM] [succ] init env [HI_APPM] [succ] init cmd [HI_APPM] [succ] init monitor [HI_APPM] ########### Appm Start End ########### parse 73 domain_name = para = router.ctc, 0xbe879ec4 [sysuptime: 16] Start init cm remote management module! device wan_4096 is already a member of a bridge; can't enslave it to bridge br0. udhcpc: started, v1.27.2 udhcpc: [61995] sending discover udhcpc: sending select for 192.168.1.39 [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] udhcpc: lease of 192.168.1.39 obtained, lease time 604800 RTNETLINK answers: No such file or directory [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv4 ADDR CHANGE Event, WanName []. parse 73 domain_name = para = router.ctc, 0xbe818ec4 error=0x7000000e function=__qos_wan_mixapp_add line=858 parse 73 domain_name = para = router.ctc, 0xbe8ffec4 parse 73 domain_name = para = router.ctc, 0xbef8eec4 [WIFI_MAIN]wifi_init SUCC! hmac_init_np_soft_ba_addr:addr:0 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=0 amsdu_num=16 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=1 amsdu_num=16 5g the cali result to device succ {hmac_save_cali_data_to_file:: ret =35629!} hdpp_hslink_notify_init: succ excp wifi callback register chip0 random: odhcp6c: uninitialized urandom read (4 bytes read) iwpriv Hisilicon0 alg set_2g_dpd_power_param 016e0168 0170016b 0176016f 0161015d 01640160 016b0164 [Jul 10 2025-14:41:38], Receive Wan Connection Up Event, WanName [1_INTERNET_B_VID_]. __hi_wifi_comm_attr_submit __hi_wifi_comm_attr_submit Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_2g_dpd_low_power_param 014b0154 0158015b 014d0151 014e0153 01470151 01560155 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000000 01400140 01400140 01420141 0140013a 013a013a 01400138 013e013f 01400140 0140013d 0140013f 01390139 0140013b 013d013d 0140013c 01400140 01370140 01400140 013e0140 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000000 01400140 01400140 012c012c 0140012e 012d012e 0140012e 01310131 01400130 012f012f 01400129 012c0129 0140012d 012c012d 0140012b 01400140 01290140 01400140 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000001 01360136 01360136 01410140 0136013c 013f013b 0136013d 01430142 01360142 01490148 01360148 013c0140 0136013f 013f0143 01360142 01360136 013c0136 01360136 01440136 RTNETLINK answers: No such file or directory Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000001 01360136 01360136 0130012d 01360131 01330132 01360133 01330133 01360133 01340134 01360132 012e0132 01360131 012c0130 0136012e 01360136 01320136 01360136 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_xo_ppm_cali_param 00004040 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_rssi_param 00000000 00000000 00000000 00000000 00000000 00000000 00000204 00000000 00080000 00000000 Hisilicon0 alg:[SUCC] tiangong1 wifi_version Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. ############## Turn On Internet Led ############## RTNETLINK answers: File exists killall: phddns: no process killed ############igdCmWanConnectionOption125Init Start ############ lTotalNum [0]. ############WanConnectionOption125 Attribute Table Init End ############ ############igdCmWanConnectionOption16Init Start ############ lTotalNum [0]. ############WanConnectionOption16 Attribute Table Init End ############ ############igdCmWanConnectionOption17Init Start ############ lTotalNum [0]. ############WanConnectionOption17 Attribute Table Init End ############ igdCmWanConnectionIPFwdRouteInit OK. [Jul 10 2025-14:41:38], Send VOIP Connection Up Message. [Jul 10 2025-14:41:38], Receive Wan Connection Add Event, WanName [1_INTERNET_B_VID_]. [sysuptime: 19] Distribute Main! [XML_ERR:_mib_chain_get(235)] getXMLDir(471) fail! parse 73 domain_name = para = router.ctc, 0xbeed4eb5 [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv6 DNS Servers, WanName [1_INTERNET_B_VID_]. random: odhcp6c: uninitialized urandom read (3 bytes read) random: odhcp6c: uninitialized urandom read (4 bytes read) [HI_IPC] ipc call hi_hi_netif_set_ddos_rule_call fail, pid 0 ret 90000000, data0[3175010] [sysuptime: 20] Distribute Medium! random: odhcp6c: uninitialized urandom read (4 bytes read) vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 chip id is 0cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 chip id is 1cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log INFO::[NULL:97 nlc_wksp_init]create socket succ INFO::[NULL:68 nlc_netlink_create]netlink_create INFO::[NULL:70 nlc_netlink_create]nlc_netlink_create: netlink id[25]! INFO::[NULL:78 nlc_netlink_create]netlink socket create succ INFO::[NULL:86 nlc_netlink_create]bind netlink socket succ INFO::[NULL:243 nlc_netlink_recv_pthread]enter netlink_recv_pthread hostpad_pid is 2164 pid 2164's current affinity mask: 5b3a60 pid 2164's new affinity mask: 5b3a60 random: hostapd: uninitialized urandom read (20 bytes read) killall: app_acs: no process killed INFO::[NULL:54 nlc_msg_add_app_handler]app type:8 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=51844 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] __hi_wifi_mode_set 14 INFO::[NULL:54 nlc_msg_add_app_handler]app type:3 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=58308 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK vap0 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit hostapd_cli_remove: REMOVE vap0 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069870924 ret 90000000, data0[812671350] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 0 hostapd_cli_remove: REMOVE vap8 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069870924 ret 90000000, data0[946889078] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 8 __hi_wifi_mode_set 15 rootif mld0 que_pri 0 get_sch fail init qos info fail, ifname mld0 commit_proc: flag=2 g_ssidnum_band[0]=8 g_ssidnum_band[1]=8 del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 parse 73 domain_name = para = router.ctc, 0xbee28eb5 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK vap8 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit Sorry, rule does not exist. random: odhcp6c: uninitialized urandom read (4 bytes read) parse 73 domain_name = para = router.ctc, 0xbedf1eb5 iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? lMeshParaChanged = 0 vap en is 1 [WLAN_DBG_ERR:hi_wifi_mld_vap_restart(736)]link_vap_2g->ui_vap_en=1 link_vap_5g->ui_vap_en=0 Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap1 hostapd_cli_remove: REMOVE vap1 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap2 hostapd_cli_remove: REMOVE vap2 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap3 hostapd_cli_remove: REMOVE vap3 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap4 hostapd_cli_remove: REMOVE vap4 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap5 hostapd_cli_remove: REMOVE vap5 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap6 hostapd_cli_remove: REMOVE vap6 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap7 hostapd_cli_remove: REMOVE vap7 OK Sorry, rule does not exist. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. lMeshParaChanged = 1 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 OK hostapd_cli_remove: REMOVE vap0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE hwifi_read_nv_config:find modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini tag_index:13 err!!! Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] random: hostapd: uninitialized urandom read (31 bytes read) random: hostapd: uninitialized urandom read (1024 bytes read) random: hostapd: uninitialized urandom read (31 bytes read) vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbeb3beb5 lMeshParaChanged = 0 vap en is 0 del br vap9 hostapd_cli_remove: REMOVE vap9 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap10 hostapd_cli_remove: REMOVE vap10 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap11 hostapd_cli_remove: REMOVE vap11 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap12 hostapd_cli_remove: REMOVE vap12 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap13 hostapd_cli_remove: REMOVE vap13 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap14 hostapd_cli_remove: REMOVE vap14 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap15 hostapd_cli_remove: REMOVE vap15 OK lMeshParaChanged = 0 vap en is 0 del br vap1 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap1 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory lMeshParaChanged = 0 vap en is 0 del br vap9 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap9 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't crearootif vap20 que_pri 0 get_sch fail te /proc/wlan_share/config: noneinit qos info fail, ifname vap20 xistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory uiRepeaterEnable [1] ulRepeaterModeType[4] set g_repeater_mlo_mode to 0 g_ui_sta24:0 g_ui_sta58:0 g_mld_sta:0 rootif vap50 que_pri 0 get_sch fail init qos info fail, ifname vap50 pid 3053's current affinity mask: 5e3a60 pid 3053's new affinity mask: 5e3a60 success: IGD_CM_OPERATE_SUCCESS. pid 3078's current affinity mask: 5d3a60 pid 3078's new affinity mask: 5d3a60 killall: easymesh: no process killed bandsteering_enable1 ip6tables v1.8.2 (legacy): Couldn't load match `ipv6header':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. commit_proc: flag=1 nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading TELNET_ENABLE: 1 TELNET_PORT: 23 killall: telnetd: no process killed sh: syntax error: unexpected "(" SSH_ENABLE: 0 SSH_USER: SSH_PASSWD: SSH_PORT: killall: dropbear: no process killed killall: crond: no process killed [sysuptime: 29] Distribute Tardy! ulIPver: 0 ulPingCnt: 4 ulBlkSize: 56 ulTimeout: 10000 ulInterval: 0 acWanIf: acHost: pc_waninterface: ifname: host: CM RepNum: 5 INFO [HI_EmAgentApiInit:431]HI_EmAgentApiInit success [XML_WRN:_mib_chain_get(243)] recordNum(0), id(699), final_idx(0), pCurr(0), pCurr->pData(0) nslookup: can't resolve '(null)' hsan login: vap0: INTERFACE-DISABLED [sysuptime: 29] Distribute Finish! del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap8: INTERFACE-DISABLED 1970-01-01 08:01:14.615 [debug] init_run: start appd (/bin/appd) cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 [UBUS:hi_load_existing_lan(393)]hi_load_existing_lan 393 fail! [UBUS:hi_load_existing_dns(267)]hi_load_existing_dns 267 fail! [UBUS:hi_load_existing_url(373)]hi_load_existing_url 373 fail! Start webserver now nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hrtimer: interrupt took 10166 ns hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 hostapd_cli_remove: REMOVE vap1 OK del br vap2 hostapd_cli_remove: REMOVE vap2 OK del br vap3 parse 73 domain_name = para = router.ctc, 0xbe9b3eb5 hostapd_cli_remove: REMOVE vap3 OK del br vap4 hostapd_cli_remove: REMOVE vap4 OK del br vap5 hostapd_cli_remove: REMOVE vap5 OK del br vap6 hostapd_cli_remove: REMOVE vap6 OK del br vap7 hostapd_cli_remove: REMOVE vap7 OK vap0: INTERFACE-DISABLED vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK Name: cn.pool.ntp.org Address 1: 202.118.1.130 time.neu.edu.cn Address 2: 84.16.67.12 tock.ntp.infomaniak.ch Address 3: 139.199.214.202 Address 4: 202.118.1.81 time.neu.edu.cn hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 hostapd_cli_remove: REMOVE vap11 OK del br vap12 hostapd_cli_remove: REMOVE vap12 OK del br vap13 parse 73 domain_name = para = router.ctc, 0xbeda5eb5 hostapd_cli_remove: REMOVE vap13 OK del br vap14 hostapd_cli_remove: REMOVE vap14 OK del br vap15 hostapd_cli_remove: REMOVE vap15 OK vap8: INTERFACE-DISABLED vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit Invalid command : bsd_5g_load [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 1! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! [UBUS:_ubus_notify_handler(49)]'ctcapd.laninfo' 'devicestatus' '{"mac":"00:e0:70:c6:73:49","active":0}' nslookup: can't resolve '(null)' Interface doesn't accept private ioctl... get_noise (8BE1): Invalid argument commit_proc: flag=2 Invalid command : bsd_5g_load [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 1! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! [UBUS:_ubus_notify_handler(49)]'ctcapd.laninfo' 'newdevice' '{"mac":"00:e0:70:c6:73:49","vmac":"","connecttype":0,"port":2,"hostname":""}' [UBUS:_add_laninfo_obj(481)]hi_dynamically_add_object error [UBUS:hi_ctcapd_wifi_mesh_set(353)]hi_parameter_check_func fail! nslookup: can't resolve 'cn.pool.ntp.org' nslookup: can't resolve '(null)' commit_proc: flag=4 Name: cn.pool.ntp.org Address 1: 84.16.73.33 tick.ntp.infomaniak.ch Address 2: 119.28.183.184 Address 3: 202.118.1.130 time.neu.edu.cn Address 4: 202.118.1.81 time.neu.edu.cn detect internet dns successfully, go... vote controller finish, I am agent INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:8. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:1. INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:10. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:9. commit_proc: flag=10 commit_proc: flag=2 10 Jul 15:31:43 ntpdate[4703]: step time server 132.163.97.3 offset 1752132582.360949 sec [HI_IPC] ipc call hi_IPC_igdCmGetRebootInfo_call fail, pid 1351 ret fffffffc, data0[0] [UBUS:hi_ctcapd_getrebootstatus(164)]REBOOT 1 random: crng init done random: 1 urandom warning(s) missed due to ratelimiting commit_proc: flag=4 cfg mod 05800000 print=0008 trace=0 [HI_IPC] ipc call hi_IPC_igdCmGetRebootInfo_call fail, pid 1351 ret fffffffc, data0[0] [UBUS:hi_ctcapd_getrebootstatus(164)]REBOOT 1 hsan login: [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] reboot: Restarting system HI, BSBC! P:3101 P:1013 P:1018 P:3202 P:3700 P:3203 P:3204 P:1021 hi-esbc start boot_info.value a0000..... boot mode 2...... match board UPTV1D0_BE3600, board_id_val 4216a0 sec init spi hw init succ ??boot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17510438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81000 size 0x100 to addr 0x17511438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81100 size 0x1bf0 to addr 0x17511538 normal boot...... no secure boot, dont check sign...... no secure boot, dont check code image..... start ddrinit from addr 17511538 ddrinit finish This boot is main region 0 area...... nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read oob: offset 0xa0000 nand read oob: offset 0xc0000 nand read oob: offset 0xe0000 nand read: offset 0x83df0 size 0x783d8 to addr 0x80102000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont check code image..... check nvcnt...... check version start...... There is no version in efuse dice not support...... subkey_id = 0x00 esbc_mask = 0x01 bl_nvcnt = 0x01 start to uboot...... U-Boot 2022.07 (May 06 2025 - 15:17:07 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 140 devices, 18 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xe5, Chip ID: 0x71 Unknown DS35Q1GA Unknown DS35Q1GA 128 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 64 128 MiB Loading Environment from NAND... Scanning device for bad blocks OK In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 bootflag verify succ Reset Info: Linux reboot cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ hsan_pie pie: pie probe succ eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 bootreg offset: c0c boot regval: 10 boot from kernela and update reg to 11 hi_secboot_main sec init sec init succ drivers init succ boot_info.value a0000..... Size not on a page boundary (0x800), rounding to 0x800 Size not on a page boundary (0x800), rounding to 0x538000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont code check hash..... check nvcnt...... check version start...... There is no version in efuse dice not support...... flash boot succ...... uboot secboot exit name:56190527, serial_number:edd5da7e Image Name: Linux-5.10.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5352624 Bytes = 5.1 MiB Load Address: 80208000 Entry Point: 80208000 By default, the matching mode of hsan is used Match dtbo succ, chip = hsan,tiangong1, boardid = 4331168, vendorid = upt alias console=/uart1@10119000 serialnr->high=0x11, serialnr->low=0x10119000, atag_addr=0x80201000 SPI Nand Spec : Chip[134217728B] Block[131072B] Page[2048B] OOB[64B] ECC[4bit] Chip Name : DS35Q1GA ## Transferring control to Linux ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 5.10.0 (yliu@yliu) (arm-mix510-linux-gcc (musl-1.2.3 linux-5.10 V12CS61.003.020 2024-01-16 12:00:00) 10.3.0, GNU ld (GNU Binutils) 2.38) #2 SMP Thu Jul 10 14:42:19 CST 2025 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: hsan-tiangong1 OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 earlycon: pl11 at MMIO 0x10119000 (options '') printk: bootconsole [pl11] enabled Memory policy: Data cache writealloc OF: reserved mem: OVERLAP DETECTED! fermion (0x80000000--0x80200000) overlaps with mem@0x80000000 (0x80000000--0x80200000) Zone ranges: Normal [mem 0x0000000080200000-0x000000008fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000008b3fffff] node 0: [mem 0x000000008d800000-0x000000008d8fffff] node 0: [mem 0x000000008e400000-0x000000008fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] mdesc->l2c_aux_val 430001 mdesc->l2c_aux_mask ffb0fffe percpu: Embedded 20 pages/cpu s49932 r8192 d23796 u81920 Built 1 zonelists, mobility grouping on. Total pages: 52420 Kernel command line: noinitrd console=ttyAMA0,115200 earlycon cma=0 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) allocated 264192 bytes of page_ext mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 194408K/211968K available (8404K kernel code, 1430K rwdata, 2712K rodata, 1372K init, 532K bss, 17560K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 rcu: Hierarchical RCU implementation. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 192, preallocated irqs: 192 L2C: platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform tries to modify or specify cache size L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310: enabling full line of zeros but not enabled in Cortex-A9 L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 16 ways, 256 kB L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x46430001 random: get_random_bytes called from start_kernel+0x384/0x550 with crng_init=0 sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255550ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e6a221d, max_idle_ns: 440795213442 ns Switching to timer-based delay loop, resolution 3ns clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 39817925974 ns Ignoring duplicate/late registration of read_current_timer delay Calibrating delay loop (skipped), value calculated using timer frequency.. 575.00 BogoMIPS (lpj=2875000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) CPU: Testing write buffer coherency: ok CPU0: Spectre v2: using BPIALL workaround CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80208220 - 0x8020825c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU1: Spectre v2: using BPIALL workaround smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated (1150.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. Serial: AMBA PL011 UART driver OF: /gpio@10109000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@1010a000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@0x26006000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag 10119000.uart1: ttyAMA0 at MMIO 0x10119000 (irq = 203, base_baud = 0) is a SBSA printk: console [ttyAMA0] enabled printk: console [ttyAMA0] enabled printk: bootconsole [pl11] disabled printk: bootconsole [pl11] disabled 10118000.uart0: ttyAMA1 at MMIO 0x10118000 (irq = 204, base_baud = 12000000) is a PL011 rev2 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 8 NET: Registered protocol family 20 clocksource: Switched to clocksource arm_global_timer VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered protocol family 44 Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=16 bucket_order=2 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs: driver 2.1.32 [Flags: R/W DEBUG]. jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. fuse: init (API version 7.32) Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) loop: module loaded libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage GACT probability NOT on Mirror/redirect action on u32 classifier input device check on Actions configured xt_time: kernel timezone is -0000 ipip: IPv4 and MPLS over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 l2tp_ip: L2TP IP encapsulation support (L2TPv3) l2tp_netlink: L2TP netlink interface l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 cfg80211: failed to load regulatory.db Warning: unable to open an initial console. Freeing unused kernel memory: 1372K Kernel memory protection not selected by kernel config. Run /init as init process hi_crg: loading out-of-tree module taints kernel. [DFX] HSAN mlog_print function is unavailable... Basic driver of Linux Kernel install successfully ...! hi-reset reset0: resister reset device hi-reset reset@1: resister reset device hi-reset reset@2: resister reset device hi-reset reset@3: resister reset device hi-reset reset@4: resister reset device hi-reset reset@5: resister reset device hi-reset reset@6: resister reset device hi-reset reset@7: resister reset device hi-reset reset@8: resister reset device hi-reset reset@9: resister reset device 102a0000.fmc_acp : ON 10103000.dmac0_acp : ON 12000000.sec_acp : ON 12080000.pie_acp : ON watchdog: watchdog0 running and kernel based pre-userspace handler disabled HSAN FMC Controller Device Driver, Version 100 15 fixed-partitions partitions found on MTD device 102a0000.fmc Creating 15 MTD partitions on "102a0000.fmc": 0x000000000000-0x000000080000 : "esbc0_a" 0x000000080000-0x000000180000 : "uboota" 0x000000180000-0x000000280000 : "ubootb" 0x000000280000-0x000000300000 : "enva" 0x000000300000-0x000000380000 : "envb" 0x000000380000-0x000000580000 : "fac" 0x000000580000-0x000000780000 : "cfga" 0x000000780000-0x000000980000 : "cfgb" 0x000000980000-0x000000d80000 : "log" 0x000000d80000-0x000000e00000 : "pstore" 0x000000e00000-0x000001500000 : "kernela" 0x000001500000-0x000001c00000 : "kernelb" 0x000001c00000-0x000004900000 : "rootfsa" 0x000004900000-0x000007600000 : "rootfsb" 0x000007600000-0x000008000000 : "app" show boot_reg: 11 ubi0: attaching mtd12 ubi0: scanning is finished ubi0 error: ubi_read_volume_table [ubi]: the layout volume was not found ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd12, error -22 UBI error: cannot attach mtd12 UBI error: cannot initialize UBI, error -22 jffs2: Empty flash at 0x01d1c18c ends at 0x01d1c800 UBIFS error (pid 307): cannot initialize compressor lzo, error -2 gpio-dwapb 26006000.gpio: no IRQ for port0 hi_efuse_driver efuse:ns: match succ hi_efuse_driver efuse:extend_dieid: match succ hi_efuse_driver efuse:ate_trim: match succ hi_efuse_driver efuse:wifi: match succ hi_efuse_driver efuse:sec_boot_info: match succ hi_efuse_driver efuse:sec_logic_key: match succ hi_efuse_driver efuse:online: match succ hi_efuse_driver efuse:rompatch: match succ hi_efuse_driver efuse:trim_ext: match succ hi_efuse_driver efuse:userinfo: match succ cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1149999 KHz, changing to: 1150000 KHz clocksource: Switched to clocksource timer sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255551ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e664f33, max_idle_ns: 440795207478 ns set hsan,acp-sec acp attr succ cryp probe succ hi_upsphy upsphy@1: upsphy_probe done pie module commit_id:1195a7f5 clipper module commit_id:1195a7f5 pie 12080000.pie: open dma-coherent 3000000 set hsan,acp-pie acp attr succ pie 12080000.pie: Hisilicon pie swver=v210,hwver=v310 lsw module commit_id:1195a7f5 dp module commit_id:1195a7f5 [LSW]Hisilicon lsw dp swver=v300,hwver=v310,ret=0x0 pfe module commit_id:1195a7f5 [LSW]Hisilicon lsw pfe swver=v200,hwver=v310,ret=0x0 mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed phy module commit_id:1195a7f5 [GEPHY]Genius Phy hwVer:0x20669a22 fwVer:0x6e07 [GEPHY]Genius Phy adp version:v102 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 combophy module commit_id:1195a7f5 hi_upsphy set mode :15 combophy 11920000.serdes: Hisilicon combophy_v300 driver init pcs module commit_id:1195a7f5 pcs 144c0000.pcs: Hisilicon pcs driver init pcs module commit_id:1195a7f5 pcs 514c0000.pcs: Hisilicon pcs driver init misc module commit_id:1195a7f5 mii_misc 11920084.mii_misc: Hisilicon mii misc driver init misc module commit_id:1195a7f5 mii_misc 14000178.mii_misc_ge3_2p5: Hisilicon mii misc driver init serdes module commit_id:1195a7f5 cfe pub module commit_id:4319684c [CFE]CFE PUB module install successfully ...! cfe lrn module commit_id:4319684c [CFE]CFE LRN module install successfully ...! l3 lib module commit_id:4319684c [CFE]L3 LIB module install successfully ...! l4 lib module commit_id:4319684c [CFE]L4 LIB module install successfully ...! l2tp lib module commit_id:4319684c [CFE]L2TP LIB module install successfully ...! pptp lib module commit_id:4319684c [CFE]PPTP LIB module install successfully ...! dslite lib module commit_id:4319684c [CFE]DSLITE LIB module install successfully ...! mc lib module commit_id:4319684c [CFE]MC LIB module install successfully ...! mc list module commit_id:4319684c [CFE]MC LIST module install successfully ...! vxlan lib module commit_id:4319684c [CFE]VXLAN LIB module install successfully ...! cfe adp capa module commit_id:4319684c fermion module commit_id:1195a7f5 hi_fermion_probe g_module=0 lsw/hi_fermion_fw_woe.bin hi_fermion_init start [LSW]hi_quk_init done [LSW]compile_ver:50010 compile_time:0 [LSW]thread_symbol: name:"core1_thread07_entry" pc:0x0 [LSW]thread_symbol: name:"core0_thread01_entry" pc:0x4 [LSW]thread_symbol: name:"core0_thread00_entry" pc:0x906 [LSW]thread_symbol: name:"core1_thread04_entry" pc:0xcc3 [LSW]thread_symbol: name:"core1_thread06_entry" pc:0xfaa [LSW]thread_symbol: name:"core0_thread02_entry" pc:0x1322 [LSW]thread_symbol: name:"core1_thread05_entry" pc:0x148e [LSW]thread_symbol: name:"core0_thread03_entry" pc:0x14a5 [LSW]hi_load_sym_table::thread_cnt:8 hi_quk_dfx_init done. hi_fermion_init done. fermion 17500000.fermion: Hisilicon fermion swver=v10,hwver=v10,ret=0x0 xoe module commit_id:1195a7f5 lsw woe module commit_id:1195a7f5 match tx_msdu_info_item_num setting. dpu init finish. ret=00000000 lsw_woe lsw_woe: Hisilicon lsw_woe driver init wifi tiangong module commit_id:1195a7f5 woe_wifi_tiangong woe_wifi_tiangong: Hisilicon woe wifi driver init SUCC woe dev module commit_id:1195a7f5 init micro msg succ woe_dev woe_dev: Hisilicon woe driver init mount file system start mount file system end permission adapt start permission adapt end The board info is vendor_id=upt, chip_id=tiangong1, board_id=4331168(0x4216a0) The board.xml is exist, keep old board.xml init board sysctl_conf start sysctl_conf end ln /etc/localtime rm: can't remove '/etc/localtime': No such file or directory [HI_APPM] ########### Appm Start Begin ########### appm init begin ln: /usr/httpd/web/web_log/log: File exists tar: removing leading '/' from member names ln: /usr/httpd/web/webcmcc/config_file.tar.gz: No such file or directory begin ctcc_smart_prepare !!! jffs2: Empty flash at 0x009a2a98 ends at 0x009a3000 gateway module commit_id:d671f5d6 hi_notify_init succ hsan_boot (683): drop_caches: 3 [HI_APPM] [succ] init script [HI_APPM] [succ] init path [HI_APPM] [succ] init lib [HI_APPM] [succ] init app [HI_APPM] [succ] init group [HI_APPM] [succ] init db [HI_APPM] [succ] new process(753) [HI_APPM] [succ] <0> sysinfo [HI_APPM] [succ] start sysinfo [HI_APPM] [succ] new process(755) [HI_APPM] [succ] <0> syslog [HI_APPM] [succ] <1> crashlog [HI_APPM] [succ] start syslog [HI_APPM] [succ] new process(773) [HI_APPM] [succ] <0> sysstat [HI_APPM] [succ] start sysstat [HI_APPM] [succ] new process(774) [HI_APPM] [succ] <0> encrypt [HI_APPM] [succ] start encrypt [HI_APPM] [succ] new process(776) [HI_APPM] [succ] <0> board [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[1] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[2] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[3] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[4] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[5] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[6] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[7] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[8] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[9] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[11] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[12] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[13] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[14] [LED]Led init suc!!! Led data num = 2 [HI_APPM] [succ] <1> led [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[19] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 776 ret 8ffffff2, data0[19] [HI_APPM] [succ] <2> key [HI_APPM] [succ] start ext_dev [HI_APPM] [succ] new process(779) Router mode url_init cfe xtables install succ! [WAN_ERR:hi_wan_port_attacth_netdev(332)]ifname port 00000008 not in global ports [HI_APPM] [succ] <0> wan Illegal target name 'DNS_DNAT_PORTAL'. Illegal target name 'DNS_DNAT_PORTAL'. lan init succ [HI_APPM] [succ] <1> lan [HI_APPM] [succ] start wan_lan [HI_APPM] [succ] new process(1077) [HI_APPM] [succ] <0> wlan insmod hostlimit succ!! wifi_version tiangong1&2 loading hslink module commit_id:4319684c [low_power_init]low_power_init: success [HI_APPM] [succ] <1> lanhost [HI_APPM] [succ] start host [HI_APPM] [succ] new process(1142) hi_qos_init ui_nf_conntrack_max= 61000 wlan_pm_open chip_id[0] region_info->resource NULL, base 0x26000000, 2097152, WIFI_PERI region_info->resource NULL, base 0x18200000, 4096, WIFI_GLB_CTL bus_msg_init success. plat_chip_chn_init success. [wlan_pm_init]wlan_pm_init ok! enter firmware_download_function download firmware file buf len is [524288] path=/lib/firmware/hi_wifi/FIRMWARE.bin path=/lib/firmware/hi_wifi/WCPU_DDR.bin finish download firmware firmware_download success download firmware, count [1], current time [185494]us, max time [185494]us [wlan_power_on]power on, count [1], current time [192121]us, max time [192121]us plat_excp_info_msg_process DEVICE EXCP_INFO Device plat ready! chip id : 0 wlan_pm_open SUCC chip_id[0] multi_chip_loading SUCC! custom_main_init:: chip_id=[0], len=[5336] not exist or contain wrong characters or end of file: magic_num ini_find_modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini failed!!! [WIFI_MAIN]{hal_cali_file_fill:: chip_id =0!} [HI_APPM] [succ] <0> qos [HI_APPM] [succ] start qos [HI_APPM] [succ] new process(1245) random: fast init done [HI_APPM] [succ] <0> sec Thu Jan 1 08:01:00 GMT-8 1970 [HI_APPM] [succ] <1> netapp [HI_APPM] [succ] <2> emu [HI_APPM] [succ] start netapp [HI_APPM] [succ] new process(1350) [HI_APPM] [succ] <0> upgrade [HI_APPM] [succ] <1> download [HI_APPM] [succ] start netservice [HI_APPM] [succ] new process(1352) #Init cm moudle# # Load CM config file# read deny! read deny! read deny! Load Config from default file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_GENERAL_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIP_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_BASIC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_H248_USER_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_VOICE_ADVANCED_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PROCESSING_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_HOTLINE_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_RTP_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_FAX_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_CODEC_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_SIMULATE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_TEST_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_IMS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_LINE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_PHY_INTERFACE_STATS_POOR_QUALITY_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir SYSMNG_DBUS_UPGRADE_CONFIG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir MIB_PM_SPEEDTESTFF_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir DBUS_DNS_SPEED_LIMIT_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir HTTP_FTP_DOWNLOAD_TEST_TAB Config_parser Succ. Load Config from factory config file ... [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir VOICE_CODEC_CAPBILITY_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_FORWARD_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MIRROR_CFG_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRANSFERSER_MONITOR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir TRAFFIC_DETAIL_PROCESS_SERVICE_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_0_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_1_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_2_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_3_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_4_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_5_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_6_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_7_INFO_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB [XML_WRN:enter_dir(304)] Warning, unknown dir IGD_TRAFFIC_QOS_FLOW_ATTR_TAB Config_parser Succ. Load Config from preconf.xml config file ... Config_parser Succ. Load Config Default Succ. Config load Succ! ############ Start Distribute CM Config data ############ [sysuptime: 16] Distribute Early! [HI_APPM] [succ] <0> odl [HI_APPM] [succ] start cm [HI_APPM] [succ] init env [HI_APPM] [succ] init cmd [HI_APPM] [succ] init monitor [HI_APPM] ########### Appm Start End ########### parse 73 domain_name = para = router.ctc, 0xbec8eec4 [sysuptime: 17] Start init cm remote management module! device wan_4096 is already a member of a bridge; can't enslave it to bridge br0. udhcpc: started, v1.27.2 udhcpc: [62016] sending discover udhcpc: sending select for 192.168.1.39 [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] udhcpc: lease of 192.168.1.39 obtained, lease time 604800 RTNETLINK answers: No such file or directory [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv4 ADDR CHANGE Event, WanName []. parse 73 domain_name = para = router.ctc, 0xbe8d6ec4 parse 73 domain_name = para = router.ctc, 0xbef73ec4 error=0x7000000e function=__qos_wan_mixapp_add line=858 parse 73 domain_name = para = router.ctc, 0xbe940ec4 [WIFI_MAIN]wifi_init SUCC! hmac_init_np_soft_ba_addr:addr:0 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=0 amsdu_num=16 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=1 amsdu_num=16 5g the cali result to device succ {hmac_save_cali_data_to_file:: ret =35629!} hdpp_hslink_notify_init: succ excp wifi callback register chip0 random: odhcp6c: uninitialized urandom read (4 bytes read) iwpriv Hisilicon0 alg set_2g_dpd_power_param 016e0168 0170016b 0176016f 0161015d 01640160 016b0164 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_2g_dpd_low_power_param 014b0154 0158015b 014d0151 014e0153 01470151 01560155 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000000 01400140 01400140 01420141 0140013a 013a013a 01400138 013e013f 01400140 0140013d 0140013f 01390139 0140013b 013d013d 0140013c 01400140 01370140 01400140 013e0140 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000000 01400140 01400140 012c012c 0140012e 012d012e 0140012e 01310131 01400130 012f012f 01400129 012c0129 0140012d 012c012d 0140012b 01400140 01290140 01400140 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000001 01360136 01360136 01410140 0136013c 013f013b 0136013d 01430142 01360142 01490148 01360148 013c0140 0136013f 013f0143 01360142 01360136 013c0136 01360136 01440136 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000001 01360136 01360136 0130012d 01360131 01330132 01360133 01330133 01360133 01340134 01360132 012e0132 01360131 012c0130 0136012e 01360136 01320136 01360136 00000000 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_xo_ppm_cali_param 00004040 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_rssi_param 00000000 00000000 00000000 00000000 00000000 00000000 00000204 00000000 00080000 00000000 Hisilicon0 alg:[SUCC] tiangong1 wifi_version RTNETLINK answers: No such file or directory commit_proc: flag=1 __hi_wifi_comm_attr_submit __hi_wifi_comm_attr_submit killall: phddns: no process killed ############igdCmWanConnectionOption125Init Start ############ lTotalNum [0]. ############WanConnectionOption125 Attribute Table Init End ############ ############igdCmWanConnectionOption16Init Start ############ lTotalNum [0]. ############WanConnectionOption16 Attribute Table Init End ############ ############igdCmWanConnectionOption17Init Start ############ lTotalNum [0]. ############WanConnectionOption17 Attribute Table Init End ############ igdCmWanConnectionIPFwdRouteInit OK. [Jul 10 2025-14:41:38], Receive Wan Connection Up Event, WanName [1_INTERNET_B_VID_]. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. ############## Turn On Internet Led ############## random: odhcp6c: uninitialized urandom read (3 bytes read) random: odhcp6c: uninitialized urandom read (4 bytes read) [sysuptime: 19] Distribute Main! [XML_ERR:_mib_chain_get(235)] getXMLDir(471) fail! RTNETLINK answers: File exists [Jul 10 2025-14:41:38], Send VOIP Connection Up Message. [Jul 10 2025-14:41:38], Receive Wan Connection Add Event, WanName [1_INTERNET_B_VID_]. parse 73 domain_name = para = router.ctc, 0xbee5ceb5 [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv6 DNS Servers, WanName [1_INTERNET_B_VID_]. [HI_IPC] ipc call hi_hi_netif_set_ddos_rule_call fail, pid 0 ret 90000000, data0[3175010] random: odhcp6c: uninitialized urandom read (4 bytes read) [sysuptime: 20] Distribute Medium! vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 chip id is 0cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 chip id is 1cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log INFO::[NULL:97 nlc_wksp_init]create socket succ INFO::[NULL:68 nlc_netlink_create]netlink_create INFO::[NULL:70 nlc_netlink_create]nlc_netlink_create: netlink id[25]! INFO::[NULL:78 nlc_netlink_create]netlink socket create succ INFO::[NULL:86 nlc_netlink_create]bind netlink socket succ INFO::[NULL:243 nlc_netlink_recv_pthread]enter netlink_recv_pthread hostpad_pid is 2172 pid 2172's current affinity mask: 6a3a60 pid 2172's new affinity mask: 6a3a60 random: hostapd: uninitialized urandom read (20 bytes read) killall: app_acs: no process killed INFO::[NULL:54 nlc_msg_add_app_handler]app type:8 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=57273 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] __hi_wifi_mode_set 14 INFO::[NULL:54 nlc_msg_add_app_handler]app type:3 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=45575 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK vap0 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit hostapd_cli_remove: REMOVE vap0 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069674316 ret 90000000, data0[812671350] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 0 hostapd_cli_remove: REMOVE vap8 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3069674316 ret 90000000, data0[946889078] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 8 __hi_wifi_mode_set 15 rootif mld0 que_pri 0 get_sch fail init qos info fail, ifname mld0 g_ssidnum_band[0]=8 g_ssidnum_band[1]=8 del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 parse 73 domain_name = para = router.ctc, 0xbec0eeb5 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK vap8 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit Sorry, rule does not exist. random: odhcp6c: uninitialized urandom read (4 bytes read) iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. parse 73 domain_name = para = router.ctc, 0xbedc3eb5 iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? lMeshParaChanged = 0 vap en is 1 [WLAN_DBG_ERR:hi_wifi_mld_vap_restart(736)]link_vap_2g->ui_vap_en=1 link_vap_5g->ui_vap_en=0 Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap1 hostapd_cli_remove: REMOVE vap1 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap2 hostapd_cli_remove: REMOVE vap2 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap3 hostapd_cli_remove: REMOVE vap3 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap4 hostapd_cli_remove: REMOVE vap4 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap5 hostapd_cli_remove: REMOVE vap5 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap6 hostapd_cli_remove: REMOVE vap6 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap7 hostapd_cli_remove: REMOVE vap7 OK Sorry, rule does not exist. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. lMeshParaChanged = 1 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 OK hostapd_cli_remove: REMOVE vap0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE hwifi_read_nv_config:find modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini tag_index:13 err!!! Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] random: hostapd: uninitialized urandom read (31 bytes read) random: hostapd: uninitialized urandom read (1024 bytes read) random: hostapd: uninitialized urandom read (31 bytes read) vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbec08eb5 lMeshParaChanged = 0 vap en is 0 del br vap9 hostapd_cli_remove: REMOVE vap9 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap10 hostapd_cli_remove: REMOVE vap10 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap11 hostapd_cli_remove: REMOVE vap11 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap12 hostapd_cli_remove: REMOVE vap12 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap13 hostapd_cli_remove: REMOVE vap13 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap14 hostapd_cli_remove: REMOVE vap14 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap15 hostapd_cli_remove: REMOVE vap15 OK lMeshParaChanged = 0 vap en is 0 del br vap1 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap1 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory lMeshParaChanged = 0 vap en is 0 del br vap9 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap9 OKrootif vap20 que_pri 0 get_sch fail sh: can't create /proc/wlan_shinit qos info fail, ifname vap20 are/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory uiRepeaterEnable [1] ulRepeaterModeType[4] set g_repeater_mlo_mode to 0 g_ui_sta24:0 g_ui_sta58:0 g_mld_sta:0 rootif vap50 que_pri 0 get_sch fail init qos info fail, ifname vap50 pid 3054's current affinity mask: 623a60 pid 3054's new affinity mask: 623a60 success: IGD_CM_OPERATE_SUCCESS. pid 3079's current affinity mask: 5e3a60 pid 3079's new affinity mask: 5e3a60 killall: easymesh: no process killed bandsteering_enable1 ip6tables v1.8.2 (legacy): Couldn't load match `ipv6header':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. commit_proc: flag=1 nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading TELNET_ENABLE: 1 TELNET_PORT: 23 killall: telnetd: no process killed sh: syntax error: unexpected "(" SSH_ENABLE: 0 SSH_USER: SSH_PASSWD: SSH_PORT: killall: dropbear: no process killed killall: crond: no process killed nslookup: can't resolve '(null)' [sysuptime: 29] Distribute Tardy! ulIPver: 0 ulPingCnt: 4 ulBlkSize: 56 ulTimeout: 10000 ulInterval: 0 acWanIf: acHost: pc_waninterface: ifname: host: CM RepNum: 5 INFO [HI_EmAgentApiInit:431]HI_EmAgentApiInit success [XML_WRN:_mib_chain_get(243)] recordNum(0), id(699), final_idx(0), pCurr(0), pCurr->pData(0) hsan login: vap0: INTERFACE-DISABLED [sysuptime: 30] Distribute Finish! Failed to connect to ubus del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 [UBUS:hi_load_existing_lan(393)]hi_load_existing_lan 393 fail! [UBUS:hi_load_existing_dns(267)]hi_load_existing_dns 267 fail! [UBUS:hi_load_existing_url(373)]hi_load_existing_url 373 fail! vap8: INTERFACE-DISABLED Start webserver now cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hrtimer: interrupt took 9292 ns hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 hostapd_cli_remove: REMOVE vap1 OK del br vap2 hostapd_cli_remove: REMOVE vap2 OK del br vap3 hostapd_cli_remove: REMOVE vap3 OK del br vap4 hostapd_cli_remove: REMOVE vap4 OK del br vap5 hostapd_cli_remove: REMOVE vap5 OK del br vap6 hostapd_cli_remove: REMOVE vap6 OK del br vap7 parse 73 domain_name = para = router.ctc, 0xbef38eb5 hostapd_cli_remove: REMOVE vap7 OK vap0: INTERFACE-DISABLED vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK Name: cn.pool.ntp.org Address 1: 84.16.73.33 tick.ntp.infomaniak.ch Address 2: 119.28.206.193 Address 3: 84.16.67.12 tock.ntp.infomaniak.ch Address 4: 193.182.111.143 ntp8.flashdance.cx hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 parse 73 domain_name = para = router.ctc, 0xbebe8eb5 hostapd_cli_remove: REMOVE vap11 OK del br vap12 hostapd_cli_remove: REMOVE vap12 OK del br vap13 hostapd_cli_remove: REMOVE vap13 OK del br vap14 hostapd_cli_remove: REMOVE vap14 OK del br vap15 hostapd_cli_remove: REMOVE vap15 OK vap8: INTERFACE-DISABLED vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 1! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! [UBUS:_ubus_notify_handler(49)]'ctcapd.laninfo' 'devicestatus' '{"mac":"00:e0:70:c6:73:49","active":0}' nslookup: can't resolve '(null)' commit_proc: flag=1 [UBUS:hi_ubus_signal_proc(140)]hi_ubus_signal_proc 140 fail 1! [UBUS:hi_ubus_signal_proc(143)]hi_ubus_signal_proc 143 fail! [UBUS:hi_ubus_signal_proc(147)]hi_ubus_signal_proc 147 fail! [UBUS:_ubus_notify_handler(49)]'ctcapd.laninfo' 'newdevice' '{"mac":"00:e0:70:c6:73:49","vmac":"","connecttype":0,"port":2,"hostname":""}' [UBUS:_add_laninfo_obj(481)]hi_dynamically_add_object error nslookup: can't resolve 'cn.pool.ntp.org' commit_proc: flag=1 nslookup: can't resolve '(null)' Name: cn.pool.ntp.org Address 1: 193.182.111.142 ntp7.flashdance.cx Address 2: 84.16.67.12 tock.ntp.infomaniak.ch Address 3: 139.199.214.202 Address 4: 162.159.200.123 time.cloudflare.com detect internet dns successfully, go... vote controller finish, I am agent INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:8. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:1. INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:10. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:9. commit_proc: flag=4 commit_proc: flag=2 10 Jul 15:41:44 ntpdate[4647]: step time server 132.163.97.1 offset 1752133183.015245 sec random: crng init done random: 1 urandom warning(s) missed due to ratelimiting [UBUS:hi_ctcapd_getrebootstatus(164)]REBOOT 2 [UBUS:hi_ctcapd_getrebootstatus(164)]REBOOT 2 sendUbusMsg failed. (re)starting transaction on br0udhcpc: sending renew udhcpc: received SIGTERM udhcpc: unicasting a release of 192.168.1.39 to 192.168.1.1 udhcpc: sending release udhcpc[NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] : entering released state killall: pppd: no process killed ifconfig: bad address 'd' parse 73 domain_name = para = router.ctc, 0xbe9e1eb5 killall: cms: no process killed reboot: Restarting system HI, BSBC! P:3101 P:1013 P:1018 P:3202 P:3700 P:3203 P:3204 P:1021 hi-esbc start boot_info.value a0000..... boot mode 2...... match board UPTV1D0_BE3600, board_id_val 4216a0 sec init spi hw init succ ??oot_info.value a0000..... flash boot mode ...... hi_nand_probe...... Nand Spec : Block[20000B] Page[800B] OOB[40B] page_shift[0b] read_addr_cycle[05] read_if_type[00] read_dummy_num[01] read_cmd[03] uboot_region_size [100000]...... This boot is main region 0 area...... nand read oob: offset 0x80000 nand read: offset 0x80000 size 0x1000 to addr 0x17510438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81000 size 0x100 to addr 0x17511438 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x81100 size 0x1bf0 to addr 0x17511538 normal boot...... no secure boot, dont check sign...... no secure boot, dont check code image..... start ddrinit from addr 17511538 ddrinit finish This boot is main region 0 area...... nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x82cf0 size 0x1000 to addr 0x80100f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read: offset 0x83cf0 size 0x100 to addr 0x80101f00 nand read oob: offset 0x80000 nand read oob: offset 0x80000 nand read oob: offset 0xa0000 nand read oob: offset 0xc0000 nand read oob: offset 0xe0000 nand read: offset 0x83df0 size 0x783d8 to addr 0x80102000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont check code image..... check nvcnt...... check version start...... There is no version in efuse dice not support...... subkey_id = 0x00 esbc_mask = 0x01 bl_nvcnt = 0x01 start to uboot...... U-Boot 2022.07 (May 06 2025 - 15:17:07 +0800) for tiangong1 Watchdog enabled DRAM: 224 MiB Core: 140 devices, 18 uclasses, devicetree: separate NAND: device found, Manufacturer ID: 0xe5, Chip ID: 0x71 Unknown DS35Q1GA Unknown DS35Q1GA 128 MiB, MLC, erase size: 128 KiB, page size: 2048, OOB size: 64 128 MiB Loading Environment from NAND... Scanning device for bad blocks OK In: uart1@10119000 Out: uart1@10119000 Err: uart1@10119000 bootflag verify succ Reset Info: Linux reboot cmd to reset Net: lsw_dp lsw_dp: lsw_dp probe succ lsw_pfe lsw_pfe: lsw_pfe probe succ hsan_mac gemac0@0: gemac0@0 probe succ mdio_bus mdio0@0: mdio_register mdio0@0 mdio_bus mdio0@0: mdio0@0 probe succ Genius Phy hwVer:0x20669a22 fwVer:0x6e01 hsan_mac gemac1@1: gemac1@1 probe succ hsan_mac gemac2@2: gemac2@2 probe succ hsan_mac gemac3@3: gemac3@3 probe succ hsan_mac gemac@8: gemac@8 probe succ mdio_bus mdio1@1: mdio_register mdio1@1 mdio_bus mdio1@1: mdio1@1 probe succ hsan_pie pie: pie probe succ eth0: pie bootflag a bootreg 10 hsan_mac gemac2@2: gemac2@2 link up, Speed: 1000, full multiupg detect bootdelay is 3000 Hit any key to stop autoboot: 0 bootreg offset: c0c boot regval: 10 boot from kernela and update reg to 11 hi_secboot_main sec init sec init succ drivers init succ boot_info.value a0000..... Size not on a page boundary (0x800), rounding to 0x800 Size not on a page boundary (0x800), rounding to 0x538000 dont decrypt boot code...... no secure boot, dont check sign...... no secure boot, dont code check hash..... check nvcnt...... check version start...... There is no version in efuse dice not support...... flash boot succ...... uboot secboot exit name:56190527, serial_number:edd5da7e Image Name: Linux-5.10.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5352624 Bytes = 5.1 MiB Load Address: 80208000 Entry Point: 80208000 By default, the matching mode of hsan is used Match dtbo succ, chip = hsan,tiangong1, boardid = 4331168, vendorid = upt alias console=/uart1@10119000 serialnr->high=0x11, serialnr->low=0x10119000, atag_addr=0x80201000 SPI Nand Spec : Chip[134217728B] Block[131072B] Page[2048B] OOB[64B] ECC[4bit] Chip Name : DS35Q1GA ## Transferring control to Linux ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 5.10.0 (yliu@yliu) (arm-mix510-linux-gcc (musl-1.2.3 linux-5.10 V12CS61.003.020 2024-01-16 12:00:00) 10.3.0, GNU ld (GNU Binutils) 2.38) #2 SMP Thu Jul 10 14:42:19 CST 2025 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: hsan-tiangong1 OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 earlycon: pl11 at MMIO 0x10119000 (options '') printk: bootconsole [pl11] enabled Memory policy: Data cache writealloc OF: reserved mem: OVERLAP DETECTED! fermion (0x80000000--0x80200000) overlaps with mem@0x80000000 (0x80000000--0x80200000) Zone ranges: Normal [mem 0x0000000080200000-0x000000008fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000008b3fffff] node 0: [mem 0x000000008d800000-0x000000008d8fffff] node 0: [mem 0x000000008e400000-0x000000008fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] mdesc->l2c_aux_val 430001 mdesc->l2c_aux_mask ffb0fffe percpu: Embedded 20 pages/cpu s49932 r8192 d23796 u81920 Built 1 zonelists, mobility grouping on. Total pages: 52420 Kernel command line: noinitrd console=ttyAMA0,115200 earlycon cma=0 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) allocated 264192 bytes of page_ext mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 194408K/211968K available (8404K kernel code, 1430K rwdata, 2712K rodata, 1372K init, 532K bss, 17560K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 rcu: Hierarchical RCU implementation. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 192, preallocated irqs: 192 L2C: platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform modifies aux control register: 0x02030000 -> 0x02430001 L2C: DT/platform tries to modify or specify cache size L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310: enabling full line of zeros but not enabled in Cortex-A9 L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 16 ways, 256 kB L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x46430001 random: get_random_bytes called from start_kernel+0x384/0x550 with crng_init=0 sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255550ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e6a221d, max_idle_ns: 440795213442 ns Switching to timer-based delay loop, resolution 3ns clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 39817925974 ns Ignoring duplicate/late registration of read_current_timer delay Calibrating delay loop (skipped), value calculated using timer frequency.. 575.00 BogoMIPS (lpj=2875000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) CPU: Testing write buffer coherency: ok CPU0: Spectre v2: using BPIALL workaround CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80208220 - 0x8020825c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU1: Spectre v2: using BPIALL workaround smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated (1150.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. Serial: AMBA PL011 UART driver OF: /gpio@10109000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@1010a000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag OF: /gpio@0x26006000/gpio-port@0: could not get #gpio-cells for /efuse/ns/bbldo3_vsetflag 10119000.uart1: ttyAMA0 at MMIO 0x10119000 (irq = 203, base_baud = 0) is a SBSA printk: console [ttyAMA0] enabled printk: console [ttyAMA0] enabled printk: bootconsole [pl11] disabled printk: bootconsole [pl11] disabled 10118000.uart0: ttyAMA1 at MMIO 0x10118000 (irq = 204, base_baud = 12000000) is a PL011 rev2 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 8 NET: Registered protocol family 20 clocksource: Switched to clocksource arm_global_timer VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NET: Registered protocol family 44 Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=16 bucket_order=2 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs: driver 2.1.32 [Flags: R/W DEBUG]. jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. fuse: init (API version 7.32) Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) loop: module loaded libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage GACT probability NOT on Mirror/redirect action on u32 classifier input device check on Actions configured xt_time: kernel timezone is -0000 ipip: IPv4 and MPLS over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 l2tp_ip: L2TP IP encapsulation support (L2TPv3) l2tp_netlink: L2TP netlink interface l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 cfg80211: failed to load regulatory.db Warning: unable to open an initial console. Freeing unused kernel memory: 1372K Kernel memory protection not selected by kernel config. Run /init as init process hi_crg: loading out-of-tree module taints kernel. [DFX] HSAN mlog_print function is unavailable... Basic driver of Linux Kernel install successfully ...! hi-reset reset0: resister reset device hi-reset reset@1: resister reset device hi-reset reset@2: resister reset device hi-reset reset@3: resister reset device hi-reset reset@4: resister reset device hi-reset reset@5: resister reset device hi-reset reset@6: resister reset device hi-reset reset@7: resister reset device hi-reset reset@8: resister reset device hi-reset reset@9: resister reset device 102a0000.fmc_acp : ON 10103000.dmac0_acp : ON 12000000.sec_acp : ON 12080000.pie_acp : ON watchdog: watchdog0 running and kernel based pre-userspace handler disabled HSAN FMC Controller Device Driver, Version 100 15 fixed-partitions partitions found on MTD device 102a0000.fmc Creating 15 MTD partitions on "102a0000.fmc": 0x000000000000-0x000000080000 : "esbc0_a" 0x000000080000-0x000000180000 : "uboota" 0x000000180000-0x000000280000 : "ubootb" 0x000000280000-0x000000300000 : "enva" 0x000000300000-0x000000380000 : "envb" 0x000000380000-0x000000580000 : "fac" 0x000000580000-0x000000780000 : "cfga" 0x000000780000-0x000000980000 : "cfgb" 0x000000980000-0x000000d80000 : "log" 0x000000d80000-0x000000e00000 : "pstore" 0x000000e00000-0x000001500000 : "kernela" 0x000001500000-0x000001c00000 : "kernelb" 0x000001c00000-0x000004900000 : "rootfsa" 0x000004900000-0x000007600000 : "rootfsb" 0x000007600000-0x000008000000 : "app" show boot_reg: 11 ubi0: attaching mtd12 ubi0: scanning is finished ubi0 error: ubi_read_volume_table [ubi]: the layout volume was not found ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd12, error -22 UBI error: cannot attach mtd12 UBI error: cannot initialize UBI, error -22 jffs2: Empty flash at 0x01d1c18c ends at 0x01d1c800 UBIFS error (pid 307): cannot initialize compressor lzo, error -2 gpio-dwapb 26006000.gpio: no IRQ for port0 hi_efuse_driver efuse:ns: match succ hi_efuse_driver efuse:extend_dieid: match succ hi_efuse_driver efuse:ate_trim: match succ hi_efuse_driver efuse:wifi: match succ hi_efuse_driver efuse:sec_boot_info: match succ hi_efuse_driver efuse:sec_logic_key: match succ hi_efuse_driver efuse:online: match succ hi_efuse_driver efuse:rompatch: match succ hi_efuse_driver efuse:trim_ext: match succ hi_efuse_driver efuse:userinfo: match succ cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1149999 KHz, changing to: 1150000 KHz clocksource: Switched to clocksource timer sched_clock: 64 bits at 287MHz, resolution 3ns, wraps every 2199023255551ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x424e664f33, max_idle_ns: 440795207478 ns set hsan,acp-sec acp attr succ cryp probe succ hi_upsphy upsphy@1: upsphy_probe done pie module commit_id:1195a7f5 clipper module commit_id:1195a7f5 pie 12080000.pie: open dma-coherent 3000000 set hsan,acp-pie acp attr succ pie 12080000.pie: Hisilicon pie swver=v210,hwver=v310 lsw module commit_id:1195a7f5 dp module commit_id:1195a7f5 [LSW]Hisilicon lsw dp swver=v300,hwver=v310,ret=0x0 pfe module commit_id:1195a7f5 [LSW]Hisilicon lsw pfe swver=v200,hwver=v310,ret=0x0 mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed mdio module commit_id:1195a7f5 libphy: hi_mii_bus: probed phy module commit_id:1195a7f5 [GEPHY]Genius Phy hwVer:0x20669a22 fwVer:0x6e07 [GEPHY]Genius Phy adp version:v102 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 phy module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 mac module commit_id:1195a7f5 combophy module commit_id:1195a7f5 hi_upsphy set mode :15 combophy 11920000.serdes: Hisilicon combophy_v300 driver init pcs module commit_id:1195a7f5 pcs 144c0000.pcs: Hisilicon pcs driver init pcs module commit_id:1195a7f5 pcs 514c0000.pcs: Hisilicon pcs driver init misc module commit_id:1195a7f5 mii_misc 11920084.mii_misc: Hisilicon mii misc driver init misc module commit_id:1195a7f5 mii_misc 14000178.mii_misc_ge3_2p5: Hisilicon mii misc driver init serdes module commit_id:1195a7f5 cfe pub module commit_id:4319684c [CFE]CFE PUB module install successfully ...! cfe lrn module commit_id:4319684c [CFE]CFE LRN module install successfully ...! l3 lib module commit_id:4319684c [CFE]L3 LIB module install successfully ...! l4 lib module commit_id:4319684c [CFE]L4 LIB module install successfully ...! l2tp lib module commit_id:4319684c [CFE]L2TP LIB module install successfully ...! pptp lib module commit_id:4319684c [CFE]PPTP LIB module install successfully ...! dslite lib module commit_id:4319684c [CFE]DSLITE LIB module install successfully ...! mc lib module commit_id:4319684c [CFE]MC LIB module install successfully ...! mc list module commit_id:4319684c [CFE]MC LIST module install successfully ...! vxlan lib module commit_id:4319684c [CFE]VXLAN LIB module install successfully ...! cfe adp capa module commit_id:4319684c fermion module commit_id:1195a7f5 hi_fermion_probe g_module=0 lsw/hi_fermion_fw_woe.bin hi_fermion_init start [LSW]hi_quk_init done [LSW]compile_ver:50010 compile_time:0 [LSW]thread_symbol: name:"core1_thread07_entry" pc:0x0 [LSW]thread_symbol: name:"core0_thread01_entry" pc:0x4 [LSW]thread_symbol: name:"core0_thread00_entry" pc:0x906 [LSW]thread_symbol: name:"core1_thread04_entry" pc:0xcc3 [LSW]thread_symbol: name:"core1_thread06_entry" pc:0xfaa [LSW]thread_symbol: name:"core0_thread02_entry" pc:0x1322 [LSW]thread_symbol: name:"core1_thread05_entry" pc:0x148e [LSW]thread_symbol: name:"core0_thread03_entry" pc:0x14a5 [LSW]hi_load_sym_table::thread_cnt:8 hi_quk_dfx_init done. hi_fermion_init done. fermion 17500000.fermion: Hisilicon fermion swver=v10,hwver=v10,ret=0x0 xoe module commit_id:1195a7f5 lsw woe module commit_id:1195a7f5 match tx_msdu_info_item_num setting. dpu init finish. ret=00000000 lsw_woe lsw_woe: Hisilicon lsw_woe driver init wifi tiangong module commit_id:1195a7f5 woe_wifi_tiangong woe_wifi_tiangong: Hisilicon woe wifi driver init SUCC woe dev module commit_id:1195a7f5 init micro msg succ woe_dev woe_dev: Hisilicon woe driver init mount file system start mount file system end permission adapt start permission adapt end The board info is vendor_id=upt, chip_id=tiangong1, board_id=4331168(0x4216a0) The board.xml is exist, keep old board.xml init board sysctl_conf start sysctl_conf end ln /etc/localtime rm: can't remove '/etc/localtime': No such file or directory [HI_APPM] ########### Appm Start Begin ########### appm init begin ln: /usr/httpd/web/web_log/log: File exists tar: removing leading '/' from member names ln: /usr/httpd/web/webcmcc/config_file.tar.gz: No such file or directory begin ctcc_smart_prepare !!! gateway module commit_id:d671f5d6 hi_notify_init succ jffs2: Empty flash at 0x009a2a98 ends at 0x009a3000 hsan_boot (682): drop_caches: 3 [HI_APPM] [succ] init script [HI_APPM] [succ] init path [HI_APPM] [succ] init lib [HI_APPM] [succ] init app [HI_APPM] [succ] init group [HI_APPM] [succ] init db [HI_APPM] [succ] new process(752) [HI_APPM] [succ] <0> sysinfo [HI_APPM] [succ] start sysinfo [HI_APPM] [succ] new process(754) [HI_APPM] [succ] <0> syslog [HI_APPM] [succ] <1> crashlog [HI_APPM] [succ] start syslog [HI_APPM] [succ] new process(772) [HI_APPM] [succ] <0> sysstat [HI_APPM] [succ] start sysstat [HI_APPM] [succ] new process(773) [HI_APPM] [succ] <0> encrypt [HI_APPM] [succ] start encrypt [HI_APPM] [succ] new process(775) [HI_APPM] [succ] <0> board [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[1] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[2] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[3] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[4] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[5] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[6] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[7] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[8] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[9] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[11] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[12] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[13] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[14] [LED]Led init suc!!! Led data num = 2 [HI_APPM] [succ] <1> led [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[19] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[17] [HI_IPC] ipc call hi_hi_board_iomap_call_call fail, pid 775 ret 8ffffff2, data0[19] [HI_APPM] [succ] <2> key [HI_APPM] [succ] start ext_dev [HI_APPM] [succ] new process(778) Router mode url_init cfe xtables install succ! [WAN_ERR:hi_wan_port_attacth_netdev(332)]ifname port 00000008 not in global ports [HI_APPM] [succ] <0> wan Illegal target name 'DNS_DNAT_PORTAL'. Illegal target name 'DNS_DNAT_PORTAL'. lan init succ [HI_APPM] [succ] <1> lan [HI_APPM] [succ] start wan_lan [HI_APPM] [succ] new process(1076) [HI_APPM] [succ] <0> wlan insmod hostlimit succ!! wifi_version tiangong1&2 loading hslink module commit_id:4319684c [low_power_init]low_power_init: success [HI_APPM] [succ] <1> lanhost [HI_APPM] [succ] start host [HI_APPM] [succ] new process(1141) hi_qos_init ui_nf_conntrack_max= 61000 wlan_pm_open chip_id[0] region_info->resource NULL, base 0x26000000, 2097152, WIFI_PERI region_info->resource NULL, base 0x18200000, 4096, WIFI_GLB_CTL bus_msg_init success. plat_chip_chn_init success. [wlan_pm_init]wlan_pm_init ok! enter firmware_download_function download firmware file buf len is [524288] path=/lib/firmware/hi_wifi/FIRMWARE.bin path=/lib/firmware/hi_wifi/WCPU_DDR.bin finish download firmware firmware_download success download firmware, count [1], current time [187890]us, max time [187890]us [wlan_power_on]power on, count [1], current time [194504]us, max time [194504]us plat_excp_info_msg_process DEVICE EXCP_INFO Device plat ready! chip id : 0 wlan_pm_open SUCC chip_id[0] multi_chip_loading SUCC! custom_main_init:: chip_id=[0], len=[5336] [HI_APPM] [succ] <0> qos [HI_APPM] [succ] start qos [HI_APPM] [succ] new process(1239) not exist or contain wrong characters or end of file: magic_num ini_find_modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini failed!!! [WIFI_MAIN]{hal_cali_file_fill:: chip_id =0!} random: fast init done [HI_APPM] [succ] <0> sec Thu Jul 10 15:46:38 GMT-8 2025 [HI_APPM] [succ] <1> netapp [HI_APPM] [succ] <2> emu [HI_APPM] [succ] start netapp [HI_APPM] [succ] new process(1349) [HI_APPM] [succ] <0> upgrade [HI_APPM] [succ] <1> download [HI_APPM] [succ] start netservice [HI_APPM] [succ] new process(1351) #Init cm moudle# # Load CM config file# Config_parser Succ. Load Config from config file Succ. Config load Succ! ############ Start Distribute CM Config data ############ [sysuptime: 16] Distribute Early! [HI_APPM] [succ] <0> odl [HI_APPM] [succ] start cm [HI_APPM] [succ] init env [HI_APPM] [succ] init cmd [HI_APPM] [succ] init monitor [HI_APPM] ########### Appm Start End ########### parse 73 domain_name = para = router.ctc, 0xbed28ec4 [sysuptime: 16] Start init cm remote management module! device wan_4096 is already a member of a bridge; can't enslave it to bridge br0. udhcpc: started, v1.27.2 udhcpc: [1752133599737] sending discover udhcpc: sending select for 192.168.1.39 [NETMONITOR]: The dhcpv4 node is not found: mac[4c:c0:96:c6:1f:80] udhcpc: lease of 192.168.1.39 obtained, lease time 604800 RTNETLINK answers: No such file or directory [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv4 ADDR CHANGE Event, WanName []. parse 73 domain_name = para = router.ctc, 0xbef27ec4 error=0x7000000e function=__qos_wan_mixapp_add line=858 parse 73 domain_name = para = router.ctc, 0xbec43ec4 parse 73 domain_name = para = router.ctc, 0xbec6aec4 [WIFI_MAIN]wifi_init SUCC! hmac_init_np_soft_ba_addr:addr:0 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=0 amsdu_num=16 [WOE]hi_woe_amsdu_num_set::chip_id=0 band_id=1 amsdu_num=16 5g the cali result to device succ {hmac_save_cali_data_to_file:: ret =35629!} random: odhcp6c: uninitialized urandom read (4 bytes read) hdpp_hslink_notify_init: succ excp wifi callback register chip0 iwpriv Hisilicon0 alg set_2g_dpd_power_param 016e0168 0170016b 0176016f 0161015d 01640160 016b0164 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_2g_dpd_low_power_param 014b0154 0158015b 014d0151 014e0153 01470151 01560155 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000000 01400140 01400140 01420141 0140013a 013a013a 01400138 013e013f 01400140 0140013d 0140013f 01390139 0140013b 013d013d 0140013c 01400140 01370140 01400140 013e0140 RTNETLINK answers: No such file or directory Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000000 01400140 01400140 012c012c 0140012e 012d012e 0140012e 01310131 01400130 012f012f 01400129 012c0129 0140012d 012c012d 0140012b 01400140 01290140 01400140 00000000 killall: phddns: no process killed ############igdCmWanConnectionOption125Init Start ############ lTotalNum [0]. ############WanConnectionOption125 Attribute Table Init End ############ ############igdCmWanConnectionOption16Init Start ############ lTotalNum [0]. ############WanConnectionOption16 Attribute Table Init End ############ ############igdCmWanConnectionOption17Init Start ############ lTotalNum [0]. ############WanConnectionOption17 Attribute Table Init End ############ igdCmWanConnectionIPFwdRouteInit OK. [Jul 10 2025-14:41:38], Receive Wan Connection Up Event, WanName [1_INTERNET_B_VID_]. __hi_wifi_comm_attr_submit __hi_wifi_comm_attr_submit Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_power_param 00000001 01360136 01360136 01410140 0136013c 013f013b 0136013d 01430142 01360142 01490148 01360148 013c0140 0136013f 013f0143 01360142 01360136 013c0136 01360136 01440136 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_5g_dpd_low_power_param 00000001 01360136 01360136 0130012d 01360131 01330132 01360133 01330133 01360133 01340134 01360132 012e0132 01360131 012c0130 0136012e 01360136 01320136 01360136 00000000 [sysuptime: 18] Distribute Main! [XML_ERR:_mib_chain_get(235)] getXMLDir(471) fail! Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_xo_ppm_cali_param 00004040 Hisilicon0 alg:[SUCC] iwpriv Hisilicon0 alg set_rssi_param 00000000 00000000 00000000 00000000 00000000 00000000 00000204 00000000 00080000 00000000 Hisilicon0 alg:[SUCC] tiangong1 wifi_version Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. random: odhcp6c: uninitialized urandom read (3 bytes read) random: odhcp6c: uninitialized urandom read (4 bytes read) ############## Turn On Internet Led ############## RTNETLINK answers: File exists [Jul 10 2025-14:41:38], Send VOIP Connection Up Message. [Jul 10 2025-14:41:38], Receive Wan Connection Add Event, WanName [1_INTERNET_B_VID_]. [Jul 10 2025-14:41:38], Receive Wan Connection Achieve IPv6 DNS Servers, WanName [1_INTERNET_B_VID_]. parse 73 domain_name = para = router.ctc, 0xbeef1eb5 [HI_IPC] ipc call hi_hi_netif_set_ddos_rule_call fail, pid 0 ret 90000000, data0[3175010] random: odhcp6c: uninitialized urandom read (4 bytes read) [sysuptime: 20] Distribute Medium! vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 chip id is 0cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log commit_proc: flag=2 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 chip id is 1cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log INFO::[NULL:97 nlc_wksp_init]create socket succ INFO::[NULL:68 nlc_netlink_create]netlink_create INFO::[NULL:70 nlc_netlink_create]nlc_netlink_create: netlink id[25]! INFO::[NULL:78 nlc_netlink_create]netlink socket create succ INFO::[NULL:86 nlc_netlink_create]bind netlink socket succ INFO::[NULL:243 nlc_netlink_recv_pthread]enter netlink_recv_pthread hostpad_pid is 2179 pid 2179's current affinity mask: 613a60 pid 2179's new affinity mask: 613a60 random: hostapd: uninitialized urandom read (20 bytes read) killall: app_acs: no process killed INFO::[NULL:54 nlc_msg_add_app_handler]app type:8 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=60687 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] __hi_wifi_mode_set 14 INFO::[NULL:54 nlc_msg_add_app_handler]app type:3 event type:2 INFO::[NULL:55 nlc_msg_add_app_handler]register port=58877 INFO::[NULL:125 nlc_node_register]**************** INFO::[NULL:144 nlc_node_register] del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK del br vap0 hostapd_cli_remove: REMOVE vap0 OK vap0 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit hostapd_cli_remove: REMOVE vap0 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3070047052 ret 90000000, data0[812671350] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 0 hostapd_cli_remove: REMOVE vap8 OK [HI_IPC] ipc call hi_hi_netif_del_ifinfo_call fail, pid 3070047052 ret 90000000, data0[946889078] [WOE]hi_woe_vap_pkt_cnt_get::vap_info is NULL chip_id 0 vap_id 8 __hi_wifi_mode_set 15 rootif mld0 que_pri 0 get_sch fail init qos info fail, ifname mld0 g_ssidnum_band[0]=8 g_ssidnum_band[1]=8 del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 parse 73 domain_name = para = router.ctc, 0xbef4aeb5 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK del br vap8 hostapd_cli_remove: REMOVE vap8 OK vap8 alg:[SUCC]pow_mode = init auto rate __hi_wifi_comm_attr_submit Sorry, rule does not exist. parse 73 domain_name = para = router.ctc, 0xbebd4eb5 iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap0':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? random: odhcp6c: uninitialized urandom read (4 bytes read) Another app is currently holding the xtables lock. Perhaps you want to use the -w option? iptables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? ip6tables: No chain/target/match by that name. Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? Another app is currently holding the xtables lock. Perhaps you want to use the -w option? lMeshParaChanged = 0 vap en is 1 [WLAN_DBG_ERR:hi_wifi_mld_vap_restart(736)]link_vap_2g->ui_vap_en=1 link_vap_5g->ui_vap_en=0 lMeshParaChanged = 0 vap en is 0 del br vap1 hostapd_cli_remove: REMOVE vap1 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap2 hostapd_cli_remove: REMOVE vap2 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap3 hostapd_cli_remove: REMOVE vap3 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap4 hostapd_cli_remove: REMOVE vap4 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap5 hostapd_cli_remove: REMOVE vap5 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap6 hostapd_cli_remove: REMOVE vap6 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap7 hostapd_cli_remove: REMOVE vap7 OK Sorry, rule does not exist. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_forward_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.8.2 (legacy): Couldn't load target `quick_link_ssid_input_vap8':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. lMeshParaChanged = 0 vap en is 1 del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 OK hostapd_cli_remove: REMOVE vap0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE hwifi_read_nv_config:find modu /lib/firmware/hi_wifi/cfg_tg1_6w22ipa_6w25epa_layer4.ini tag_index:13 err!!! Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] random: hostapd: uninitialized urandom read (31 bytes read) random: hostapd: uninitialized urandom read (1024 bytes read) random: hostapd: uninitialized urandom read (31 bytes read) vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 parse 73 domain_name = para = router.ctc, 0xbec57eb5 lMeshParaChanged = 0 vap en is 0 del br vap9 hostapd_cli_remove: REMOVE vap9 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap10 hostapd_cli_remove: REMOVE vap10 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap11 hostapd_cli_remove: REMOVE vap11 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap12 hostapd_cli_remove: REMOVE vap12 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap13 hostapd_cli_remove: REMOVE vap13 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap14 hostapd_cli_remove: REMOVE vap14 OK Sorry, rule does not exist. lMeshParaChanged = 0 vap en is 0 del br vap15 iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. hostapd_cli_remove: REMOVE vap15 OK iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables v1.8.2 (legacy): Couldn't load target `HI_SSID_ISOLATE':No such file or directory Try `iptables -h' or 'iptables --help' for more informatirootif vap20 que_pri 0 get_sch fail on. sh: can't create /proc/wlaninit qos info fail, ifname vap20 _share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory sh: can't create /proc/wlan_share/config: nonexistent directory uiRepeaterEnable [1] ulRepeaterModeType[4] set g_repeater_mlo_mode to 0 g_ui_sta24:0 g_ui_sta58:0 g_mld_sta:0 rootif vap50 que_pri 0 get_sch fail init qos info fail, ifname vap50 pid 3042's current affinity mask: 5f3a60 pid 3042's new affinity mask: 5f3a60 success: IGD_CM_OPERATE_SUCCESS. run easymesh agent pid 3070's current affinity mask: 5d3a60 pid 3070's new affinity mask: 5d3a60 bandsteering_enable1 ip6tables v1.8.2 (legacy): Couldn't load match `ipv6header':No such file or directory Try `ip6tables -h' or 'ip6tables --help' for more information. commit_proc: flag=1 nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading TELNET_ENABLE: 1 TELNET_PORT: 23 killall: telnetd: no process killed sh: syntax error: unexpected "(" SSH_ENABLE: 0 SSH_USER: SSH_PASSWD: SSH_PORT: killall: dropbear: no process killed killall: crond: no process killed [sysuptime: 29] Distribute Tardy! ulIPver: 0 ulPingCnt: 4 ulBlkSize: 56 ulTimeout: 10000 ulInterval: 0 acWanIf: acHost: pc_waninterface: ifname: host: CM RepNum: 5 INFO [HI_EmAgentApiInit:431]HI_EmAgentApiInit success vap0: INTERFACE-DISABLED [sysuptime: 29] Distribute Finish! del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap8: INTERFACE-DISABLED [UBUS:main(20)]ubus connect fail cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hsan login: hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! 2025-07-10 15:46:52.656 [debug] init_run: start appd (/bin/appd) nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument Start webserver now OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap1 hostapd_cli_remove: REMOVE vap1 OK del br vap2 hostapd_cli_remove: REMOVE vap2 OK del br vap3 hostapd_cli_remove: REMOVE vap3 OK del br vap4 hostapd_cli_remove: REMOVE vap4 OK del br vap5 parse 73 domain_name = para = router.ctc, 0xbecb5eb5 hostapd_cli_remove: REMOVE vap5 OK del br vap6 hostapd_cli_remove: REMOVE vap6 OK del br vap7 hostapd_cli_remove: REMOVE vap7 OK vap0: INTERFACE-DISABLED vap0 alg:[SUCC]pow_mode = init auto rate vap0: INTERFACE-ENABLED __hi_wifi_comm_attr_submit vap8: INTERFACE-DISABLED del br mld0 link_vap_2g: vap0, link_vap_5g: vap8 vap0: INTERFACE-DISABLED cfgFile file is /var/hostapd_wlan0_vap0.conf logFile file is /var/hostapd_wlan0_vap0.log cfgFile file is /var/hostapd_wlan1_vap8.conf logFile file is /var/hostapd_wlan1_vap8.log hostapd_cli_remove: REMOVE vap8 Remove interface 'vap8' vap8: interface state ENABLED->DISABLED vap8: AP-DISABLED vap8: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap8 disabled_11b_rates=0 bridge=0 brname=br0 nl80211: Failed to remove interface vap8 from bridge br0: Invalid argument OK hostapd_cli_remove: REMOVE vap0 Remove interface 'vap0' vap0: interface state ENABLED->DISABLED vap0: AP-DISABLED vap0: CTRL-EVENT-TERMINATING Currently, WAPI encryption is not used, wapi_deinit_iface is not required!!! nl80211: deinit ifname=vap0 disabled_11b_rates=0 bridge=0 brname=br0 OK hostapd_cli_add: ADD bss_config=vap8:/var/hostapd_wlan1_vap8.conf Configuration file: /var/hostapd_wlan1_vap8.conf (phy vap8) --> new PHY rfkill: Cannot open RFKILL control device vap8: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap8 with hwaddr 4c:c0:96:c6:2c:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] vap8: interface state COUNTRY_UPDATE->ENABLED vap8: AP-ENABLED OK hostapd_cli_add: ADD bss_config=vap0:/var/hostapd_wlan0_vap0.conf Configuration file: /var/hostapd_wlan0_vap0.conf (phy vap0) --> new PHY rfkill: Cannot open RFKILL control device vap0: interface state UNINITIALIZED->COUNTRY_UPDATE Using interface vap0 with hwaddr 4c:c0:96:c6:24:80 and ssid "ChinaNet-1F80" sh: can't create /proc/wifilog/connect/All: nonexistent directory wpa_driver_nl80211_wps_status[1669] nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range nl80211: kernel reports: integer out of range vap0: interface state COUNTRY_UPDATE->ENABLED vap0: AP-ENABLED hostapd_mld_start: curr vap0 state:1 OK vap0 alg:[SUCC]atf_mode set succ !!! mode = [2] vap0 alg:[SUCC]min prop = 1 vap8 alg:[SUCC]atf_mode set succ !!! mode = [2] vap8 alg:[SUCC]min prop = 1 add br mld0 link_vap_2g: vap0, link_vap_5g: vap8 del br vap9 hostapd_cli_remove: REMOVE vap9 OK del br vap10 hostapd_cli_remove: REMOVE vap10 OK del br vap11 hostapd_cli_remove: REMOVE vap11 OK del br vap12 hostapd_cli_remove: REMOVE vap12 OK del br vap13 parse 73 domain_name = para = router.ctc, 0xbef08eb5 hostapd_cli_remove: REMOVE vap13 OK del br vap14 hostapd_cli_remove: REMOVE vap14 OK del br vap15 hostapd_cli_remove: REMOVE vap15 OK vap8: INTERFACE-DISABLED vap8 alg:[SUCC]pow_mode = init auto rate vap8: INTERFACE-ENABLED __hi_wifi_comm_attr_submit commit_proc: flag=1 commit_proc: flag=1 hrtimer: interrupt took 18333 ns INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:8. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:1. INFO [EmIntfDisableMeshSSIDPerBand:1257]EasyMesh: bBssIndex:10. INFO [EmIntfDisableMeshSSIDPerBand:1274]EasyMesh: fBssIndex:9. commit_proc: flag=2 commit_proc: flag=2 10 Jul 15:47:22 ntpdate[4642]: step time server 132.163.97.1 offset -17.245269 sec random: crng init done random: 1 urandom warning(s) missed due to ratelimiting Invalid command : bsd_5g_load Invalid command : bsd_5g_load commit_proc: flag=10 commit_proc: flag=4