Project

General

Profile

Bug #3685

[W3]页面多次enable/disable 5G SSID，执行多次后，5G interface有时会无法enable起来，页面会提示出错无法配置成功

Added by yaochuan cao 6 months ago. Updated 5 months ago.

Status:
Resolved
Priority:
Normal
Assignee:
佳文 吴
Start date:
09/28/2025
Due date:
% Done:

50%

测试版本:
zte133-router-w3-rel-v1.0.22-a605d632
复现概率:
70%

Description

页面多次enable/disable 5G SSID，执行多次后，5G interface有时会无法enable起来，页面会提示出错“error 1501 on file”导致无法配置成功

2.4g-down-after-change-2g-bw20.7z (67.7 KB) sheng miao, 10/16/2025 10:20

5G-interface-down-after-changing-5G security.7z (533 KB) sheng miao, 10/16/2025 10:20

5g-ssid-down-by-changing-beacon-interval.7z (33.3 KB) sheng miao, 10/16/2025 10:20

5g-intf-down-after-set-bw20-11ax.7z (99 KB) sheng miao, 10/16/2025 10:20

AML-开启5G失败-phy1配置.log Magnifier (5.18 KB) 佳文 吴, 10/24/2025 17:10

有点复现-成功开启5G.log Magnifier (14.8 KB) 佳文 吴, 10/24/2025 17:10

9746a6ec1d8ad240f668babf8334ee40.png (5.81 KB) 佳文 吴, 10/27/2025 09:16

20251027_115807.log Magnifier (229 KB) 佳文 吴, 10/27/2025 14:13

History

#1 Updated by yaochuan cao 6 months ago

  • Assignee set to Yunhui Hu

#2 Updated by Yunhui Hu 6 months ago

  • Assignee changed from Yunhui Hu to 佳文 吴

#3 Updated by 佳文 吴 6 months ago

aml提供的复现步骤：
1. Configure 5G 11ax-mixed, 160MHz-mixed, WPA2/WPA3-PSK;
2. Start sniffer on 5G channel and check beacon interval by filter wlan.ssid=="CMCC-SSID5";
3. Confiqure 5G beacon interval=0ms FAlL as min=20ms;
4. Configure 5G beacon interval=20ms;
5. Wait 60+ seconds and configure 5G beacon interval=1000ms;
6. Wait 60+ seconds and configure 5G beacon interval=200ms;
7. Wait 60+ seconds and configure 5G beacon interval=100ms;
8. Check 5G wifi status;

#4 Updated by 佳文 吴 6 months ago

  • % Done changed from 0 to 10

版本：v1.0.22-a605d632
测试次数：10+
测试流程：如上描述
测试结果：未出现无法enable情况

#6 Updated by 佳文 吴 5 months ago

AML开启5G失败的hostapd-phy1.conf，有点这边可以使用这个conf开启5G成功

#7 Updated by 佳文 吴 5 months ago

这个驱动版本的没出现这个问题
iwpriv wlan0 get_verinfo
wlan0 get_verinfo:
- release: v1.0.17
- build: zte133 - 2025-07-17 14:33:13
- commit: d86b31f4 - (w3_trunk)

#8 Updated by 佳文 吴 5 months ago

WiFi驱动版本：
iwpriv wlan0 get_verinfo
wlan0 get_verinfo:
- release: rel-v1.0.25
- build: zte133 - 2025-10-23 09:19:43
会出现上述问题。
出现这个情况后：
1. WEB UI下发的配置可以配置到hostapd-phy1.conf文件中
2. 开启5G的hostapd进程正常运行
3. ifconfig 查询 wlan4,这个接口down掉

#9 Updated by 佳文 吴 5 months ago

  • % Done changed from 10 to 50

复现步骤：
1.一直在web界面配置WiFi，直到hostapd进程pid为五位数
2.静置板子一段时间(1~2h)
3.再次配置WiFi，适配层去kill hostapd进程时，会找不到进程号，从而kill失败
4.之后5G wifi不能再次配置，从而出现上述情况

解决步骤：
改用其他方法获取hostapd的进程号

#10 Updated by jie cheng 5 months ago

  • Status changed from New to Resolved

Also available in: Atom PDF